• Title/Summary/Keyword: 연료극 물질

Search Result 40, Processing Time 0.026 seconds

A Numerical Study of Cathode Block and Air Flow Rate Effect on PEMFC Performance (고분자전해질 연료전지의 환원극 블록과 공기 유량 영향에 대한 전산 해석 연구)

  • Jo, Seonghun;Kim, Junbom
    • Applied Chemistry for Engineering
    • /
    • v.33 no.1
    • /
    • pp.96-102
    • /
    • 2022
  • Reactants of PEMFC are hydrogen and oxygen in gas phases and fuel cell overpotential could be reduced when reactants are smoothly transported. Numerous studies to modify cathode flow field design have been conducted because oxygen mass transfer in high current density region is dominant voltage loss factor. Among those cathode flow field designs, a block in flow field is used to forced supply reactant gas to porous gas diffusion layer. In this study, the block was installed on a simple fuel cell model. Using computational fluid dynamics (CFD), effects of forced convection due to blocks on a polarization curve and local current density contour were studied when different air flow rates were supplied. The high current density could be achieved even with low air supply rate due to forced convection to a gas diffusion layer and also with multiple blocks in series compared to a single block due to an increase of forced convection effect.

Implementation of Composited Fuel Heater and Test Chamber for Diesel Cars (디젤 차량용 통합 연료히터와 시험챔버 구현)

  • Yoon, Dal-Hwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.5
    • /
    • pp.2375-2380
    • /
    • 2013
  • In this paper, we have implemented the unified fuel heater and performance evaluation system for diesel cars. In order to strengthen an engine starting of diesel car, we need to assembly the fuel filter and heater. Especially, this assembly fuel heater is very important in winter, it is necessary for heating to operate the diesel engine. The heater for unifying the sensor and heater body can advance the performance of car and reduce the production cost. Finally, the performance test chamber is needed to evaluate the performance of heater.

Performance Analysis of Methanol Fueled Marine Solid Oxide Fuel Cell System (메탄올 연료형 SOFC 시스템의 성능 평가)

  • Kim, Myoung-Hwan;Kil, Byung-Lea;Lim, Tae-Woo;Kim, Jong-Su;Oh, Sae-Gin;Park, Sang-Kyun;Kim, Mann-Eung;Lee, Kyung-Jin;Oh, Jin-Suk
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.4
    • /
    • pp.448-454
    • /
    • 2010
  • The strengthened regulations for atmospheric emissions from ships have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. Recently, new kinds of propulsion power system such as fuel cell system, which use hydrogen as an energy source, have been sincerely considered. The purpose of this work is to predict the performance of methanol fueled SOFC system and to analyze the influence of operating temperature, current density, S/C, and $H_2$ utilization ratio.

Simplified Resistor Network Calculation for Electrical and Mass Transport in Anode-Supported Planar Solid Oxide Fuel Cell (연료극지지 평판형 고체산화물 연료전지 내에서의 전기 및 물질전달에 대한 간략화된 저항 네트워크 계산)

  • Lee, Hyun-Jae;Nam, Jin-Hyun;Kim, Charn-Jung
    • Proceedings of the KSME Conference
    • /
    • 2004.11a
    • /
    • pp.1740-1745
    • /
    • 2004
  • A simplified resistor network model for electrical and mass transport in anode-supported planar solid oxide fuel cell (SOFC) was constructed in order to investigate the effect of interconnect rib geometry on the cell performance. For accurate potential calculation, activation and concentration over-potentials at the electrode/electrolyte interfaces were fully considered in this calculation. When contact resistance was not considered, the optimum interconnect rib length were calculated to be $0.1{\sim}0.2$ mm for 2 mm half unit cell for given operation conditions and properties. However, with realistic contact resistance, the interconnect rib length should be increased to provide larger contact area and thus to obtain better performance.

  • PDF

Study of $Pr_{0.3}Sr_{0.7}CO_{x}Fe_{(1-x)}O_{3-\delta}$ (x=0, 0.3, 0.5, 0.7, 1) as the cathode materials for intermediate temperature SOFC (${\cdot}$저온형 고체 산화물 연료전지의 공기극 물질로 사용되는 $Pr_{0.3}Sr_{0.7}CO_{x}Fe_{(1-x)}O_{3-\delta}$ (x=0, 0.3, 0.5, 0.7, 1) 에 관한 연구)

  • Park, Kwang-Jin;Kim, Jung-Hyun;Lee, Chang-Bo;Bae, Joong-Myeon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.06a
    • /
    • pp.125-128
    • /
    • 2007
  • The influence of Co substitution in B-site at perovskite PSCF($Pr_{0.3}Sr_{0.7}CO_{x}Fe_{(1-x)}O_{3}$) was investigated in this study. The PSCF series exhibits excellent MIEC(mixed ionic electronic conductor) properties. ASR(area specific resistance) of PSCF3737 was 0.137 ${\Omega}{\cdot}cm^{2}$ at $700^{\circ}C$. The activation energy of PSCF3737 was also lower than other compositions of PSCF. ASR of PSCF3737 was analysed as two parts at different part of frequency region. Responses at middle frequency part (${\sim}10^2$ Hz) were concerned with oxygen reduction reaction and those at low frequency part (${\sim}10^{-1}$ Hz) were related with oxygen diffusion.

  • PDF

LNG/LPG marine accident scenarios considered relevant for building (LNG/LPG관련 해양사고 시나리오 구축에 대한 고찰)

  • Kang, Yu-Mi;An, jeing-Min;Yim, Jeong-Bin
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2015.10a
    • /
    • pp.205-207
    • /
    • 2015
  • LNG/LPG는 폭발가능성이 크기 때문에 매우 위험한 물질이다. LNG/LPG는 gas상태의 연료를 극 초저온에 고 압력 상태로 고농축한 액체 연료이다. 온도나 압력에 따라 물질의 상태가 변하기 때문에 폭발이나 화재가 일어날 수 있다. 하지만 무조건 사고가 일어나는 것은 아니며 현재까지도 화재나 폭발이 일어난 경우가 드물다. LNG/LPG선박은 충돌이나 파손 등 사고위기가 클수록 위험하다. 사고위기가 일어나는 요소로는 복잡한 항로, 많은 선박 수, 해마다 증가하는 LNG/LPG의 수요량 등이 있다. 본 연구에서는 LNG/LPG관련 해양사고 시나리오를 만들기 위해 사고 연계 고리(Accident chain)를 만들어 분석하였다. 해양사고의 연계 고리를 만들기 위해서는 story가 필요하다는 것을 알게 되었고, Risk를 통해 Peril과 Hazard를 분석 할 수 있었다. LNG/LPG의 위험성은 고압에 기인하는 위험, 화재위험, 동상위험, 화학반응의 위험, 질식 위험 등으로 분류 할 수 있었다. 아직까지는 LNG/LPG선박의 화재 및 폭발사고는 거의 일어나지 않았으나 매년 그 수요량이 증가하고 있고, 매우 위험한 물질임을 본 연구를 통해 알 수 있었다.

  • PDF

Measurement of Humidity Distribution in a Proton Exchange Membrane Fuel Cell Using Channel Embedded Humidity Sensors (채널 내장형 습도 센서를 이용한 고분자 전해질 연료전지의 습도분포 측정)

  • Lee, Yongtaek;Yang, Gyung Yull
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.39 no.5
    • /
    • pp.397-403
    • /
    • 2015
  • In this study, water distribution inside a proton exchange membrane fuel cell (PEMFC) was measured experimentally. Water distribution is non-uniform because of vigorous chemical reaction and mass transport and has been difficult to measure experimentally. Therefore, much research relied on indirect measuring methods or numerical simulations. In this study, several mini temperature-humidity sensors were installed at the channel for measuring temperature and humidity of the flowing gas throughout the channel. Only one of two electrode channels was humidified externally, and the humidity distribution on the other side was measured, enabling the observation of water transport characteristics under various conditions. Diffusion through the membrane became more vigorous as the temperature of the humidifier rose, but at high current density, electro-osmotic drag became more effective than diffusion.

Study on the Steady-State and Dynamic Performance of Polymer Electrolyte Fuel Cells with the Changes of External and Self-Humidification Conditions (고분자 전해질 연료전지의 외부가습 및 지체가습 변화에 의한 정상상태 및 비정상상태 성능특성 연구)

  • Lee, Yong-Taek;Kim, Bo-Sung;Kim, Yong-Chan;Choi, Jong-Min
    • Journal of the Korean Electrochemical Society
    • /
    • v.10 no.3
    • /
    • pp.196-202
    • /
    • 2007
  • The performance characteristics of the polymer electrolyte fuel cells (PEFCS) were investigated under various humidification conditions at steady-state and transient conditions. The PEFC studied in this study was characterized by I-V curves in the potentiostatic mode and EIS (electrochemical impedance spectroscopy). The I-V curves representing steady-state performance were obtained from OCV to 0.25 V, and the dynamic performance responses were obtained at some voltages. The effects of anodic external humidification were measured by varying relative humidity of hydrogen from 20% to 100% while dry air was supplied in the cathode. At the high voltage region, the performance became higher with the increase of the temperature, while at the low voltage region, the performance decreased with the increase of temperature. The EIS showed that ohmic losses were larger at the dry condition of membrane and the effects of mass transport losses increased remarkably when the external and self-humidification were high. The dynamic responses were also monitored by changing the voltage of the PEFC instantly. As the temperature increased, the current reached steady-state earlier. The self-humidification with the generated water delayed the stabilization of the current except for low voltage conditions.

Preparation of hybrid organic PEC cell with muti-functional nanomaterial (기능성 나노물질을 포함하는 하이브리드 유기 PEC 셀의 제조)

  • Kim, Min-Gyeong;Jeong, Jae-Hun;Im, Dong-Chan
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.266-266
    • /
    • 2015
  • 전 세계적으로 무한한 청정에너지 개발에 대한 연구가 주목받고 있다. 그 중, 수소에너지는 화석연료의 고갈과 환경문제를 동시에 해결할 수 있는 자원이며 수소 생산 방법 중에서도 태양에너지를 이용한 수소 생산 기술은 가장 이상적인 수소 생산 시스템이라 할 수 있다. 대표적인 광전극 소재로는 $WO_3$, ZnO, $Fe_2O_3$, $BiVO_4$ 등과 같은 무기 소재가 주로 사용되고 있으며, 최근에는 Si, CIGS 등과 같은 태양전지와 상기 광전극을 집적하는 탄뎀형 소재/소자가 개발되고 있다. 광전반응이 우수한 전도성 고분자는 광전기화학 전지의 소재로 개발되고 있다. 그러나 유기물의 수중 불안전성 문제 때문에 직접적으로 물에 침전시키는 것이 아니라 외부의 인가 전원용으로 그 사용이 제한적이다. 본 연구에서는 유기계 소재의 direct energy conversion을 위한 효율 및 수중 안정성 향상을 위하여 Ni계 촉매 및 그래핀옥사이드가 융합된 유기기반 광전기화학전지를 개발하였다.

  • PDF

Prevention Technologies of environmental contamination and IMO action in Arctic Ice-covered Waters (극지해역에서의 환경오염 방지 기술 및 IMO 동향)

  • Kang, Jae-Sung;Kim, Ki-Pyoung;Kang, Ho-Keun;Kim, Dae-Heon
    • Proceedings of the Korean Society of Marine Engineers Conference
    • /
    • 2011.06a
    • /
    • pp.237-239
    • /
    • 2011
  • 최근 국제해사기구(International Maritime Organization, IMO)는 "극지를 운항하는 선박에 대한 안전기준(Polar Code)"를 제정하여 결정하기로 하였으며, 2012년까지 완료하여 법제화하기로 하였다. 이는 최근의 극해 지역의 연속적인 사고의 심각성에 대한 대비책의 일환이다. 2004년도에 알라스카 앞바다에 침몰한 Selendang Ayu 는 6600만 톤의 콩, 170만 리터의 연료유와 55,564 리터의 MDO 및 다른 오염물질을 바다에 유출하였다. 이는 주변의 동물들에게 심각한 영향을 끼쳤고, 아직까지도 유출되어진 오염물질들을 완전히 처리하지 못한 상태이다(Arctic marine shipping assessment, Arctic council 2009.). 즉, 기름이 유출을 하면 방재시설이 다른 육상에서 오기 전까지는 상당히 오랜 시간 동안, 사고 지역 주변을 오염시키게 되며, 유빙이나 극한의 온도는 방재 작업을 더욱 힘들게 한다. 본 연구에서는 극해와 같은 해역에서 기름이 유출 하였을 때에 대응하는 방법, 즉 현존하는 기계적인 복구 방식, 점화식 처리 방식 과 유처리제 방식을 소개하고, 그에 대한 국제규정 및 기술 발전 동향에 대해서도 설명한다.

  • PDF