• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.110-110
• /
• 2004

하나 또는 다수개의 압전액츄에이터(piezoelectric actuator)로 구성된 시스템에서 구동 효율을 높이는데 직접적인 영향을 미치는 고정밀과 빠른 응답 특성을 구현(implementation)하기 위하여, 입력전압에 대하여 출력전압이 선형적으로 추종하고 주파수 가변(variable)이 독립적이며 순차적으로 제어가 가능한 위상가변(phase shifting)형 압전액츄에이터 구동장치의 설계가 필요하다. 구동신호론 증폭하고 가변하는 고전압 증폭 구동장치는 압전액츄에이터 구동에 직접 영향을 주게 되므로, 이의 특성인 고주파에서의 위상지연 보상, 높은 회전비(slew rate)로 고전압에서 정현파의 찌그럼짐을 방지, 전압이득의 가변 및 안정화, 입력 및 출력 임피던스의 개선과 주파스 대역폭(band width)의 확장 등은 매우 중요하다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1824-1827
• /
• 2005

For application to micro fluid control systems such as ${\mu}TAS$ (Micro Total Analysis Systems) and DDS (Drug Delivery Systems), it is very significant to handle precise and minute flow rates with low pressure pulsation. In this study, a novel valveless piezoelectric pump using peristaltic motion with three disk type PZT actuators is presented. The newly devised pump with an effective size of $70mm{\times}60mm{\times}55mm$ has three actuator layers connected in series from inlet to outlet. The PZT actuator has a maximum displacement of 240 ${\mu}m$ and a maximum force of 1.6 N. When the driving voltage for PZT actuators is sequentially applied with a certain phase shift, the pumping is performed by peristaltic motion of liquid volume. The working fluid is shut off without the driving voltage. Three methods for sequential driving are proposed and experimentally investigated. First and second methods utilize an intermittent sinusoidal waveform with phase shift of $90{\circ}\;and\;120^{\circ}$, respectively. Third method uses a rectangular waveform with phase shift of $90^{\circ}$. A controller with multi-phase shifter is designed and fabricated. Then, frequency and voltage-flow rate characteristics and load pressure-flow rate characteristics are experimentally investigated to verify the validity of the developed pump.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.728-735
• /
• 2013

In this paper, we present a method of transmitting ECG signals in real-time mobile environment to be possible to implement the ubiquitous healthcare system. Because of the excessive amount of data transmission of ECG signals, it is necessary to propose a limitation to the real-time transmission. We propose a real-time electrocardiographic monitoring system based on the proposal of unusual waveform detection algorithm which detects the R-wave distortions from the arrhythmia ECG signals having unusual waveform of about 10% on average. It is very effective in terms of time and cost for medical staffs to monitor and analyze ECG signals for a long period of time. Monitoring unusual waveform by gradually adjusting the threshold values of potential and kurtosis makes the amount of data transmitted decrease and significance level of waveform to be enhanced. The unusual waveform detection algorithm is implemented with ubiquitous environment inter-working device client. It is applicable to ubiquitous healthcare system capable of real-time monitoring the ECG signal. While ensuring the mobility, it allows for real-time continuous monitoring of ECG signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1389-1393
• /
• 2011

In this paper, we implement the VLC system based on CAN communication which is usually used in car, plane, ship, product line control system, medical device and industrial device. We implement the application circuit which is VLC and CAN communication and explain the principle. Circuit's pulse features are demonstrated by each part's signal. Total communication distance is 3m and it's transmission performance is error free.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.305-310
• /
• 2003

옥내에서 사용하는 300V 이하의 소형전기기구의 전원선으로 사용되는 비닐코드는 가요성 및 절연성이 우수하며 구조는 연동선을 꼬아 합친 것 위에 절연체(PVC)로 절연한 것이다. 비닐코드에서의 화재발생 부위는 플러그 부분, 연장코드 부분, 연장코드와 부하기기의 접속부 부분에서 발생하며, 화재 원인은 접속 및 접촉불량, 반단선, 방열불량에 의한 전선과열, 플러그 몸체 및 피복 절연물의 절연열화, 과전류(과부하) 등에 의해 선간단락이나 지락사고 등으로 화재가 발생한다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1282-1285
• /
• 2004

The high voltage driving system with multi-phase shifter including piezoelectric actuators comprised a driving power unit for outputting the driving power by converting input alternate current into direct current, a frequency shifting unit for supplying the direct current power and shifting or generating a frequency, a high-voltage amplification unit for amplifying the input signal outputted from the driving power unit and the frequency shifting unit into a high-voltage signal, and a phase shifting unit for shifting the phase difference of the amplified signal applied to the high-voltage amplification unit and driving plural piezoelectric actuators sequentially. The results that the operating voltage was stable, the voltage loss ratio was low and the response velocity was fast could be obtained. An experiment on performance of the high voltage driving system with multi-phase shifter designed and manufactured as above described was conducted by using a piezoelectric pump having 3 sheets of round unimorph piezoelectric actuators laminated respectively in a rectangular case. It sucks any fluid by causing the first piezoelectric actuator to shift from the inlet porter side, the phase delay of 60$^{\circ}$ causes the second piezoelectric actuator to begin to shift, and the phase delay of 120$^{\circ}$ causes the third piezoelectric actuator to begin to shift. As a result of measuring each change in the outlet flow rate of the piezoelectric pump, it was shown that the frequency-flow rate characteristic, the voltage-flow characteristic, and the load pressure-flow rate characteristic were improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.146-152
• /
• 2016

This paper describes a multi-physics analysis of a high resolution winding type resolver and rotary transformer using FEM (Finite Element Method). The rotary transformer boosts the input voltage to a high voltage which can be input into the rotor windings of the resolver. Through multi-physics models of the transformer and resolver, the characteristics of the output signals for the resolver system with high resolution can be derived. Moreover, the circuit model of the interface part between the transformer and resolver should be considered, because of the calculation of the input current to the resolver. The winding type resolver is composed of 32x and 1x stator windings for high resolution. Then, the output signals of the stator windings, which make sinusoidal SIN and COS waves with a $90^{\circ}$ phase difference, are verified.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.119-127
• /
• 2012

This paper describes development and performance test of signal processor for the millimeter wave seeker. A ground to air guidance missile is required various beam patterns in order to counteract different kind of target. Therefore, we designed the hardware and software architecture considering flexibility. This signal processor consists of ADC, FPGA, DSP and etc. FPGA provides peripheral interface to DSP and convert digital IF signal to baseband signal. DSP performs signal processing, calculates target's information and controls devices. Each parts' hardware are connected in series and signal processing algorithms for various beam patterns are built in parallel.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.49-53
• /
• 2016

Related researches are progressing that method of non-contact method using the electromagnetic field on the human body by detecting the motion recognition signal is the limitations of time and space, so less than the existing systems. In this paper, we designed the circuit system that can implement the hardware that can detect the electric field signal of the human body non-contact method to increase the recognition rate to screen this digital waveform. The PCB design Used to automatically increase of composition of the circuit and the linkage of the comparator digital waveform with circuit simulation of the system. At same time for evaluate the characteristics of the whole circuit system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1826-1829
• /
• 2015

본 연구는 측정된 심전도와 광용적맥파의 박동특징점을 무결하게 검출하기 위한 프로그램 개발에 관한 것이다. 개발된 프로그램은 생체신호 계측기에서 측정된 생체신호 데이터를 자동 및 수동으로 분석하여 박동특징점의 시간 및 값 정보를 추출 및 저장하는 프로그램으로, 측정된 파형 및 검출된 특징점 위치, 인접한 특징점간 시간 간격을 시각적으로 전달할 수 있는 GUI(Graphic User Interface)를 포함한다. 개발된 프로그램은 기존 연구에서 제시된 심박동, 맥파의 박동 특징점 거출 알고리즘을 사용하여 최초 검출을 수행하고, GUI와 연동되는 컨텍스트 메뉴를 통해 오검출 또는 미검출 정보를 효율적으로 수정할 수 있도록 함으로 비전문가에 의한 쉽고 효율적인 사용이 가능하다.