• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.646-657
• /
• 2018

The purpose of this study was to understand the ecological characteristics and vegetation structure of Mt. Daedun Provincial Park by setting up and surveying 42 plots ($100m^2$). The analysis using the TWINSPAN and DCA techniques found seven community groups: Quercus aliena community, Larix kaempferi community, Pinus densiflora community, Quercus variabilis-Quercus serrata community, Pinus rigida community, Carpinus tschonoskii community, and Quercus mongolica community. The results of a vegetation structure analysis showed that the dominant species of each community were likely to maintain the present structure, but, in the case of Pinus densiflora community, it is necessary to monitor the forest succession because of the competition with oak trees. The results of the DBH (diameter of breast height) analysis showed that the species in DBH 20-24cm and over 26cm were many observed, indicating that the communities were becoming stable. It is likely that the dominant species of tree canopies will maintain their state unless the unexpected physical environment changes, serious disturbance, pests or diseases occur. The results of the tree rings and annual growth analysis showed that the dominant trees had an average age of more than 40 years. The average annual growth was the highest for Quercus variabilis in community I at $3.51{\pm}2.39mm$ and the lowest for Quercus mongolica in community VII at $1.61{\pm}0.90mm$.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.157-179
• /
• 2019

The Seoul's 2030 Youth-Housing has been regarded as the only option to procure rental housing sites in downtown Seoul. But its supply did not catch up with the initial expectation, and the criticism that it may disrupt the current zoning system of the city has persisted. Consequently, the 2030 Youth-Housing policy has undergone amendments for six times within the last three years, and the significant changes in its guideline also have been made within the last one year. The study, in this context, tries to figure out the tendencies of those changes made in the guidelines so far by analyzing the aspects of the parcels allowable for Youth-Housing as well as the areas allowable for up-zoning. In the process, the propositional logic is to be adopted to draw the scope of the buildable areas for Youth-Housing. For this, the study refines the raw GIS data, inputs the values for each proposition, and proceeds the logical operation to judge every parcel of the city to discern whether it is eligible for a buildable site and/or for up-zoning for Youth-Housing. It is seen that: 1) the buildable sites rather evenly distribute around the peripheral subway-station areas while more concentrating on the quasi-residential and commercial areas; and 2) the areas eligible for up-zoning have the tendency to concentrate more on quasi-residential areas than others.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.647-660
• /
• 2022

To prepare an atmospheric correction model suitable for CAS500-4 (Compact Advanced Satellite 500-4), this letter examined an atmospheric correction experiment using Sentinel-2 images having similar spectral characteristics to CAS500-4. Studies to compare the atmospheric correction results depending on different Aerosol Optical Depth (AOD) data are rarely found. We conducted a comparison of Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH), Sen2Cor, and Second Simulation of the Satellite Signal in the Solar Spectrum - Vector (6SV) version 1.1 and 2.1, using Geo-Kompsat 2A (GK2A) Advanced Meteorological Imager (AMI) and Aerosol Robotic Network (AERONET) AOD data. In this experiment, 6SV2.1 seemed more stable than others when considering the correlation matrices and the output images for each band and Normalized Difference Vegetation Index (NDVI).

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.725-735
• /
• 2022

Currently, disasters occurring in Korea are characterized by unpredictability and complexity. Due to these features, property damage and human casualties are increasing. Since the initial response process of these disasters is directly related to the scale and the spread of damage, optimal decision-making is essential, and information of the site must be obtained through timely applicable sensors. However, it is difficult to make appropriate decisions because indiscriminate information is collected rather than necessary information in the currently operated Disaster and Safety Situation Office. In order to improve the current situation, this study proposed a framework that quickly collects various disaster image information, extracts information required to support decision-making, and utilizes it. To this end, a web-based display system and a smartphone application were proposed. Data were collected close to real time, and various analysis results were shared. Moreover, the capability of supporting decision-making was reviewed based on images of actual disaster sites acquired through CCTV, smartphones, and UAVs. In addition to the reviewed capability, it is expected that effective disaster management can be contributed if institutional mitigation of the acquisition and sharing of disaster-related data can be achieved together.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.4
• /
• pp.136-142
• /
• 2022

The crystal structure, grain growth behavior, and dielectric properties of BaTiO₃ have been studied with the addition of Dy₂O₃. The powders were synthesized at ratios of (100-x)BaTiO₃-xDy₂O₃ (mol%, x = 0, 0.5, 1.0, 2.0) by a conventional solid-state synthesis, and the powder compacts were sintered at 1250℃ for 2 hours in air. As the amount of added Dy₂O₃ was increased, the crystal structure of the sintered samples changed from a tetragonal to a pseudo-cubic structure, and the tetragonality decreased. In addition, a secondary phase of Ba₁₂Dy_4.67Ti₈O₃₅ appeared when Dy₂O₃ was added. The average grain size after sintering decreased and abnormal grains appeared as the amount of Dy₂O₃ increased. It can be explained that the grain growth behavior of the Dy₂O₃ added-BaTiO₃ occurs due to the two-dimensional nucleation and growth, and is governed by the interface reaction. Further, the correlation between crystal structure, microstructure, and dielectric properties was discussed.

• Journal of Korean Society for Quality Management
• /
• v.50 no.2
• /
• pp.287-304
• /
• 2022

Purpose: The size of the salad consumption market has expanded since Covid-19, and continuous growth is predicted. Therefore, by extracting influential core purchasers in the salad consumption market and analyzing their purchasing behaviors and consumer types, this study intended to provide basic data for establishing a marketing strategy. Methods: The analysis data is the purchasing data of 576 people who have purchased salads between 2016 and 2020 (panel data of the Rural Development Administration), and in the social network analysis, the centrality structure was analyzed. Results: First, in the results of analyzing the causes of the rapid increase in salad consumption in 2020, it was found that the increase in consumption of new purchasers (n=102) had little effect. The existing consumer type (n = 474), which has been the majority of the salad consumption market so far, were consumers with stable income. However, the results of study indicated that the type of consumers has expanded since low-income class as well as high-income class increased consumption of purchasing salad. Second, in the results of analyzing the types of key purchasers with great influence in the salad consumption market, there was a difference from the results of frequency analysis in age, number of family members, existence/absence of children, and income decile. This suggests that there should be a difference between the type of customers according to the apparent quantitative figure and the actual influential purchasers. Third, in the results of analyzing the salad purchasing behaviors of core purchasers, the purchasing site for existing purchasers was large-scale marts and for new purchasers it was corporate-type supermarkets. Purchases were concentrated on Saturdays for both existing and new purchasers. As for the purchased products, existing purchasers had a high preference for products made of chicken, and new purchasers had a high preference for vegetable/fruit salad. In particular, in the results of purchased products by age group, in the case of 50s and 60s, it was an interesting result that there was a difference between the products purchased by the existing and new purchasers even though they were the same age. Conclusion: When establishing a marketing strategy in the salad consumption market, it is necessary to pay attention to the purchasing behavior of key buyers.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.53-64
• /
• 2009

Many slope failures are induced by rainfall infiltration. A lot of recent researches are therefore focused on rainfall-induced slope instability and the rainfall infiltration is recognized as the important triggering factor. The rainfall infiltrates into the soil slope and makes the matric suction lost in the slope and even the positive pore water pressure develops near the surface of the slope. They decrease the resisting shear strength. In Korea, a few public institutions suggested conservative slope design guidelines that assume a fully saturated soil condition. However, this assumption is irrelevant and sometimes soil properties are misused in the slope design method to fulfill the requirement. In this study, a more relevant slope stability evaluation method is suggested to take into account the real rainfall infiltration phenomenon. Unsaturated soil properties such as shear strength, soil-water characteristic curve and permeability for Korean weathered soils were obtained by laboratory tests and also estimated by artificial neural network models. For real-time assessment of slope instability, failure warning criteria of slope based on deterministic and probabilistic analyses were introduced to complement uncertainties of field measurement data. The slope stability evaluation technique can be combined with field measurement data of important factors, such as matric suction and water content, to develop an early warning system for probably unstable slopes due to the rainfall.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.809-817
• /
• 2008

This paper deals with the development of ViscoElastic Continuum Damage Finite Element Program (VECD-FEP++) and its verification with the results from both field and laboratory accelerated pavement tests. Damage characteristics of asphalt concrete mixture have been defined by Schapery's work potential theory, and uniaxial constant crosshead rate tests were carried out to be used for damage model implementation. VECD-FEP++ predictions were compared with strain responses (longitudinal and transverse strains) under moving wheel loads running at different constant speeds. To this end, an asphalt pavement section (A5) of Korea Expressway Corporation Test Road (KECTR) instrumented with strain gauges were loaded with a dump truck. Also, a series of accelerated pavement fatigue tests have been conducted at pavement sections surfaced with four asphalt concrete mixtures (Dense-graded, SBS, Terpolymer, CR-TB). Planar strain responses were in good agreement with field measurements at base layers, whereas strains at both surface and intermediate layers were found different from simulation results due to the complexity of tire-road contact pressures. Finally, fatigue characteristics of four asphalt mixtures were reasonably described with VECD-FEP++.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.535-542
• /
• 2010

Precise estimation of a structure's dynamic characteristics is indispensable for ensuring stable dynamic responses during lifetime especially for the structures which can experience resonance such as railway bridges. In this paper, the results of forced vibration tests of different excitation methods (vibration exciter and impact hammer) are compared to examine the differences and the cause of differences of extracted natural frequencies. Consequently a natural frequency modification method is suggested to eliminate effects of non-structural disturbance factors. Also, sequential forced vibration tests are performed before and after track construction according to the construction stage of a railway bridge, and the variation of natural frequencies are examined. Effect of added mass of vibration exciter and variation of support condition due to the level of excitation force are concluded as the major cause of natural frequency differences. Thus eliminating these effects can enhance the reliability of the extracted natural frequencies. Construction of track affects not only the mass of structure but also the stiffness of the structure. Also, the amount of increase in stiffness varies according to the level of structural deflection. Therefore, reasonable estimation of the level of structural response during operation is important for precise natural frequency calculation at design phase.