• Journal of Korean Society of Archives and Records Management
• /
• v.23 no.2
• /
• pp.95-115
• /
• 2023

This study designed a data model linked to Wikidata and examined its applicability to increase the utilization of the digital archive records of the National Debt Redemption Movement, registered as World Memory Heritage, and implications were derived by analyzing the existing metadata, thesaurus, and semantic network graph. Through analysis of the original text of the National Debt Redemption Movement records, key data model classes for linking with Wikidata, such as record item, agent, time, place, and event, were derived. In addition, by identifying core properties for linking between classes and applying the designed data model to actual records, the possibility of acquiring abundant related information was confirmed through movement between classes centered on properties. Thus, this study's result showed that Wikidata's strengths could be utilized to increase data usage in local archives where the scale and management of data are relatively small. Therefore, it can be considered for application in a small-scale archive similar to the National Debt Redemption Movement digital archive.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.103-116
• /
• 2014

This paper presents the results of a numerical investigation on the load carrying capacity and consolidation behavior of suction piles. Three dimensional numerical models which reflect realistic ground conditions and installation procedures including the ground-suction pile interface were adopted to conduct a parametric study on variables such as the length-diameter ratio and the loading configurations, i.e, vertical, horizontal, and combined loads. The results indicated that the load carrying capacity of a suction pile can only be realistically obtained when the interface behavior between the suction pile and the ground is correctly modeled. Also carried out was the stress-pore pressure coupled analysis to investigate the consolidation behavior of the suction pile after the application of a vertical loading. Based on the results, failure envelops and associated equations were developed, which can be used to estimate load carrying capacity of suction piles installed in similar conditions considered in this study. The results of consolidation analysis based on the stress-pore pressure coupled analysis indicate that no significant excess pore pressure and associated consolidation settlement occur for the loading configuration considered in part due to the load transfer mechanism of the suction pile.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.309-319
• /
• 2003

The main purpose of this paper is to present a simulation model for assessing the impacts of a variable speed wind turbine (VSWT) on the distribution network and perform a simulation analysis of volt-age profiles and harmonics along the wind turbine installed feeder using the presented model. The modeled wind energy conversion system consists of a fixed pitch wind turbine and a permanent-magnet synchronous generator, in which a controllable power electronics inverter performs variable speed operation and reactive power output control. Impact analysis on voltage profiles and harmonics of a VSWT-installed distribution feeder is addressed and simulated in terms of steady state and dynamic behaviors. Various capacities and different modes of variable speed wind turbines are simulated and investigated. Case studies demonstrate how feeder voltages are influenced by capacity and control modes of wind turbines and changes in wind speed under various network conditions, and show harmonic impacts on the feeder. Modeling and simulation analysis is based on PSCAD/EMTDC a software package.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2220-2224
• /
• 2009

하천의 수질모의를 위해서는 정상상태 모델인 QUAL2E 가 널리 사용되어 왔다. 그러나 우리나라는 기후 특성상 하절기에 강우가 집중되고 경우에 따라서는 댐등에 의해 장기간 수류의 지체현상이 발생하므로 지역 및 시기에 따라 발생하는 수질 문제가 서로 다를 수 있다. 따라서 우리나라의 대부분의 수체에서는 시간에 따라 모의를 할 수 있는 비정상 상태의 수질모델이 적용되어야 할 필요가 종종 발생한다. 미국공병단에서 개발된 CE-QUAL-W2 모델은 2차원 모델로서 수리동역학과 수질반응역학을 한데 묶어서 풀이하였다는 점에서 획기적인 변화로 볼 수 있다. 이 모델은 종방향으로 길고 수심이 깊으며 상대적으로 하폭이 좁은 형태의 수체에 적합하며 하폭방향의 수질 변화를 나타내는 데 사용되지 못하는 단점이 있다. WASP(Water Quality Analysis and Simulation Program) 은 미국 환경부에서 개발한 비정상상태 3차원 수질모델로서 세계적으로 다양한 수체에 널리 사용되어 왔다. 이 모델에서 1차원적 흐름을 예측할 수 있는 DYNHYD 라는 수리학적 부프로그램은 2차원 또는 3차원 상황에서는 사용할 수가 없었음에 따라 수리학적 고려가 빈약한 것이 이 모델의 가장 큰 약점으로 지적되어 왔다. 최근 미국 환경부는 EFDC(Environmental Fluid Dynamics Code) 라는 3차원 수리동역학 프로그램을 이용하여 대상 수체의 수리학적 거동을 모의하고 그 결과를 WASP7 에 연계시킬 수 있도록 하여 기존의 단점을 대폭 보완하였다. 본 연구에서는 금강 상류에 위치하고 있는 용담호를 대상으로 EFDC 를 이용하여 2005년 1년간 수위 및 수온성층현상을 예측하고 그 결과가 WASP 에 연결되어 사용될 수 있도록 하였다. 적절한 격자의 수를 결정하기 위하여 다양한 경우가 시행착오적으로 시험되었으며 비교적 적은 숫자의 격자로도 수위 및 수온의 모의가 가능하다는 것을 발견하였다.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1417-1426
• /
• 2004

As Ubiquitous commerce is coming personalization service is getting interested. And also the recommendation method which offers useful information to customer becomes more important. However, most of them depend on specific method and are restricted to the E-commerce. For applying these recommendation methods into U-commerce, first it is necessary that the extended context modeling and systematic connection of the methods to complement strength and weakness of recommendation methods in each commercial transaction. Therefore, we propose a mod-eling technique of context information related to personal activation in commercial transaction and show incremental preference analysis method, using preference tree which is closely connected to recommendation method in each step. And also, we use an XML indexing technique to effi-ciently extract the recommendation information from a preference tree.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.695-699
• /
• 2009

3D and BIM technology are presumed to be used more and more in the construction industry. The scope of this paper arose from a general wondering of how the constructor in general can benefit from the use of 3D models. Presented herewith is the first application of BIM in Korea to a actual bridge construction site located in Cheongpoong in Chooncheongbook-Do. This paper tries to integrate design, cost and schedule under location-based conditions with industry-specific solution for 3D modeling. 292 activities constitute the cable-stayed bridge of 442m long with a main span of 327m long. Integration of 3D model, cost and schedule is shown by comparing the measurements of works at a specific time by use of 2 different construction sequencing scenarios and cost breakdown structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1603-1611
• /
• 2021

As IMO environmental regulations are tightened, the need to establish a system that can reduce emissions is increasing, and for this purpose, various power control management systems have been studied and implemented as a new energy management system for ships. In this study, we design a control process through modeling for Bi-Directional Converter (BDC) application with bi-directional power flow to link batteries, which are energy storage devices, to conventional generator power systems, and propose mechanisms for batteries optimized for varying loads. This work models MATLAB/Simulink as a BDC and simulates current control and state of charge (SOC) optimization at the time of charging and discharging batteries according to load scenarios. Through this, the battery, power, and load were interlocked so that the generator operated on board could be operated in the optimal operation range, and power control management was performed to enable the generator to operate in the high fuel efficiency range.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.262-262
• /
• 2020

새만금 유역 내에는 다수의 보 및 제수문이 위치하고 있으며, 관개, 배수, 오염원 등이 영향을 받고 있다. 선행연구 중에는 보 및 제수문을 고려하기 위해 모형의 소스코드를 일부 수정하여 연구되고 있으나 유역모형으로 구현하기에는 한계가 있으며, 이에 대한 연구는 미흡한 실정이다. 본 연구에서는 만경강 유역을 대상으로 유역 모형과 전산유체역학 모형을 이용하여 하류 제수문에 대한 유입, 유출 그리고 오염원 등의 영향을 분석하고자 한다. SWAT (Soil and water assessment tool)은 유역 모형으로 미국 농무부에서 농업유역의 수문순환 및 비점오염원을 모의하기 위해 개발한 모형이다. CFD (Computational fluid dynamics)는 전산유체역학 모형으로 구조물을 설계하고 유체, 기체 등을 모의할 수 있다. SWAT 모형을 이용하여 농업유역 하류 제수문 위치를 출구로 지정하여 수문을 모의하고 그 결과자료는 CFD에 입력할 수 있다. CFD는 하류 제수문 구조물을 설계하고 SWAT 모형의 수문자료를 입력하여 제수문의 영향을 평가할 수 있다. 우선, 만경강 유역을 대상유역으로 선정하고 부용, 황산, 상리, 고은교 등 제수문의 위치를 파악하였다. SWAT 모형 구축을 위해 2015-2018년까지 기상, 수위, 유량 관측자료를 수집하였으며, 보정기간과 검증기간은 각 2년이며, 모형 성능 검증에 사용한 적합성 평가 지수는 R² (Determine coefficient), RMSE (Root mean square error), 그리고 NSE (Nash-sutcliffe efficiency coefficient)를 사용하였다. 모형의 보정은 SWAT-CUP 자동보정프로그램을 사용하였으며, 모형의 보정지수는 NSE를 사용하였고, 1,000회 반복 수행을 통해 매개변수를 최적화하였다. 보정기간의 유출량 적합성 평가 지수는 R², RMSE 그리고 NSE가 각각 0.84, 2.96 mm/day, 0.70을 나타냈다. 검증기간의 유출량 적합성 평가 지수는 R², RMSE 그리고 NSE가 각각 0.72, 2.94 mm/day, 0.46을 나타냈다. 본 연구는 유역 차원과 구조물 차원의 모델링을 연계하는 것으로 향후 제수문 모니터링 자료를 활용하여 CFD 모형을 구축하고 유입량에 따른 제수문의 검보정 및 영향을 평가하고자 한다. 이러한 결과는 최근 기후변화에 따라 급격히 변화하는 유역환경에 대처할 수 있는 방안이 될 수 있을 것이며, 제수문 시설을 관리하는 기관에서도 합리적인 운영방안에 대한 기초자료로 기여할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.442-445
• /
• 2002

Construction delay claim occurs more often than any other claim. Delay claim impacts adversely the company's existence as well as the project's monetary problem. Because the calculation of the delay is not quantitative, owing not to have enough evidence, it is hard to solve evenly the delay claim. So, it is need to cumulate structurely the construction data or evidence during the construction. This study considers the established study about construction delay claim database and the problems and then presents the relation method between phase schedule and database. Finally, this study established the productivity claim database modeling for construction project through conceptual database modeling and logical database modeling based on information needed to make construction productivity database. So. the purpose of the study is to establish the datamodel for productivity management of construction project for calculating the delay days considering the lost productivity.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.546-557
• /
• 2016

Tooth carving practice is required for novice learners in dentistry to understand dental morphology and acquire clinically underlying skills. Tooth carving practice is more effective when sequential models can be observed. The purpose of this study is to suggest a tooth carving practice model and to develop a mobile practice supporting tool based on tutorial providing 3D modeling information about steps of tooth carving. As a result, tooth carving practice model consists of the class activity including tooth information lecture and practice and mobile seamless learning connecting learners' practice and regular learning with the mobile tutorial tool. The mobile tutorial tool is implemented with tooth morphology dictionary, tooth carving practice/training tutorial, and 3D tooth modeling. The experts' evaluation on the developed contents shows that the content and function are valid(content validity: 5.0, interface validity: 4.53). Therefore, the mobile tutorial tool is suitable for supporting mobile seamless learning for tooth carving practice. Further researches are expected to be conducted to develop instructional models utilizing ICT and mobile contents in dentistry.