• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.53-65
• /
• 1998

합류구간에 설치된 차량검지기에서 수집된 조사자료들을 이용하여 본 연구는 교통와해 발생원인과 용량감소 문제를 분석하였다. 본 연구에서는 거시적 및 미시적인 방법을 가지고 수행하였으며 거시적인 방법으로는 연결로 교통량의 상대적 비중차이를 분석하였고 미시적으로는 본선에 진입하는 차량들의 패턴을 분석하였다. 거시적인 측면에서 합류부의 교통와해는 같은 합류교통량에 대한 연결로교통량의 비중 차이레 의해 발생된다. 즉, 연결로교통량 비중이 높아질수록 교통와해 발생확률은 증가할 것이다. 또한 미시적인 측면에서는 연결로 교통량이 같을 때 본선에 진입하는 차량군의 크기 및 발생회수, 표준편차가 높아진다고 할 수 있다. 따라서 교통와해의 주요한 원인은 연결로교통량의 영향에 기인한다고 할 수 있고 이러한 영향을 감소시키기 위하여 램프미터링과 같은 고속도로 교통통제 기법이 요구된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.25-32
• /
• 2009

Recently, research for Network-on-chip(NoC) is progressing. However, due to the increase of system complexity and demand on high performance, conventional copper-based electrical interconnect would be faced with the design limitation of performance, power, and bandwidth. As an alternative to these problems, combined use of Electrical Interconnects(EIs) and Optical Interconnects(OIs) has been introduced. In this paper we propose efficient routing optimization strategy and hybrid switch architecture, which use OIs for critical path and EIs for non-critical path. The proposed method shows up to 25% performance improvement and 38% power reduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1574-1580
• /
• 2020

Traditional pose estimation methods include using special devices or images through image processing. The disadvantage of using a device is that the environment in which the device can be used is limited and costly. The use of cameras and image processing has the advantage of reducing environmental constraints and costs, but the performance is lower. CNN(Convolutional Neural Networks) were studied for pose estimation just using only camera without these disadvantage. Various techniques were proposed to increase cognitive performance. In this paper, the effect of the skip connection on the network was experimented by using various skip connections on the joint recognition of the hand. Experiments have confirmed that the presence of additional skip connections other than the basic skip connections has a better effect on performance, but the network with downward skip connections is the best performance.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.343-358
• /
• 2011

As implant treatment has become popular, lots of different shapes and materials of the implant upper component have been supplied. And there are also diverse reports about failures including loosening of the abutment screw which is one of the most common reason. Purpose : The purpose of this study is to find out how different screw tightening orders and methods influence on screw loosening according to the different connection systems. The upper component was fabricated by casting method. After fabricating master models that are precisely attached to the upper component, 5 experimental models each for the external connection system and internal connection system were fabricated using splinting impression technique. First, to find out the influence of the screw tightening order, screws were tightened in 3 orders; 1-2-3-4, 2-3-1-4, 2-4-3-1. After tightening, removal torque values (RTV) of each group was measured. And also to find out the influence of screw tightening method, a model with 2-3-1-4 screw tightening order was tightened with 30 Ncm at one time(1-step method) and the RTV was compared with the same order group (2-3-1-4) in the 2 step method. In the external connection system, RTV appeared significantly lower in group 2-3-1-4 than group 2-4-3-1 (p<0.05). And also in the internal connection system, the RTV of group 2-3-1-4 appeared significantly lower than that of group 2-4-3-1 and 1-2-3-4 (p<0.05). When comparing the tightening number of the screw without considering the screw tightening order, the first tightened screw appeared significantly higher RTV than the second one in the external connection system (p<0.05), however there was no significant difference from the first tightened screw to the last tightened screw in the internal connection system. And there was no statistically significant difference between the two screw tightening methods in both internal and external connection system. In the comparison of external and internal connection system, each RTV appeared 16.27 Ncm and 14.25 Ncm and appeared as a statistically significant difference (p<0.05). There was a significant difference in RTV measured according to the screw tightening order. The lowest RTV appeared in the groups started tightening from the middle. There was also a significant difference in RTV between the two connection system groups. A further study is needed to find out the influence factors in RTV and also a study is required related to the load condition.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.203-213
• /
• 2004

This study investigates the seismic responses of two structures connected by a sky-bridge equipped with viscoelastic dampers (VED) at the bridge-building connections. The applicability of the method is verified first by observing RMS (root-mean-squared) responses of two-degrees-of-freedom systems subjected to white noise ground excitation. Then model structures with various number of stories are analyzed using earthquake ground motions to observe the effect of the varying size of VED on the reduction of dynamic responses. According to the analysis results, there exists a proper size of VED which minimizes the structural responses. It is also observed that the effectiveness of VED increases as the difference of natural frequencies between the two connected structures increases.

• The Mathematical Education
• /
• v.51 no.4
• /
• pp.455-469
• /
• 2012

Given the importance of mathematical connections in instruction, this paper analyzed the objects and the methods of mathematical connections according to the lesson flow featured in 20 elementary lessons selected as effective instructional methods by local educational offices in Korea. Mathematical connections tended to occur mainly in the introduction, the first activity, and the sum-up period of each lesson. The connection between mathematical concept and procedure was the most popular followed by the connection between concept and real-life context. The most prevalent method of mathematical connections was through communication, specifically the communication between the teacher and students, followed by representation. Overall it seems that the objects and the methods of mathematical connections were diverse and prevalent, but the detailed analysis of such cases showed the lack of meaningful connection. These results urge us to investigate reasons behind these seemingly good features but not-enough connections, and to suggest implications for well-connected mathematics teaching.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.54-56
• /
• 2003

전기제품에 전선을 연결하는 수단으로써 단말장치를 사용한다. 단말장치는 작업자가 전선을 제품에 편리하게 연결시키도록 하는 전선결합수단이다 전기제품을 장시간 사용하다보면 외부환경 및 제품의 내구성의 변화로 인해 각종 사고가 발생한다. 그 중에 전선이 제품에 제대로 연결되어야만 제품의 성능이 발휘될 것이고 전선연결부위가 제품 성능에 영향을 주어서는 안된다. 제품에 전선의 결합강도, 전선의 접촉저항에 따른 온도 영향등을 규격에서는 이러한 영향 요소들을 평가/측정하기 위한 시험이 제시되어 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.634-636
• /
• 2004

멀티미디어 홈 네트웍 환경에서 IEEE1394는 멀티미디어 데이터 전송을 위한 대표적인 네트웍 프로토콜로 사용되고 있으나, 멀티미디어 데이터 전송을 위한 등시성 연결의 관리에 어려움이 많다. 이와 관련하여 본 논문에서는 IEEE1394 네트웍의 등시성 연결 관리 구조를 제안한다. 또한 제안되는 구조상에서 IEEE1394의 비동기 전송을 이용하여 등시성 전송을 관리함과 더불어 코바 API를 통하여 멀티미디어 전송을 위한 등시성 연결을 관리하는 방법에 대하여 다루고 있다.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.374-380
• /
• 1994

A method to simulate the extent of interlinkage of grain boundary gas bubbles to the free surfaces of fuel pellet was developed. With the shape of UO$_2$gain treated as tetrakaidecahedron (TKD)), the interlinked fraction of fission gas bubbles to free surfaces at grain comers was calculated as a function of the radius of grain corner bubbles by the Monte Carlo technique. In spite of two dimensional analysis, the present method shooed reasonable agreement between predicted and measured fuel swelling at the moment that complete bubble interlinkage was achieved. However, for more realistic simulation of interlinkage, grain comer bubbles should be treated three dimensionally.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.38-47
• /
• 2018

Even though there are many discussions about how to plan new content, it is difficult to find the discourse about planning new content in media academy. I tried to check how useful the semantics is in planning new content by autoethnography and how liberal art approach connect with content production field. As I had had no experience of making new current issue program, I chose forced connection method to develop new program's title 'Danbak'. By listing the meaning of 'Danbak' which means 'at once', 'without delay', 'on the spot', 'frankly', I could arrange new mechanism for the program and decide whom to invite and this could be called content planning method by semantics. This is the result of forced production environment characterized by short period for planning and small team and it shows that liberal art approach is useful enough.