• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.3-5
• /
• 1997

지구 물리학이나 의공학 분야등에서 이용되왔던 전기비저항 탐사법은 관심 영역에 전류 입력을 가한 후, 그에 대한 전압 응답을 측정하여 관심 영역 내의 전기비저항 분포를 규명하는 방법으로서 역해석 문제의 범주에 포함된다. 따라서 일반적인 역해석 문제가 지니고 있는 해의 존재성, 유일성, 그리고 측정 데이터에 대한 해의 연속적 의존성이라는 기본적 문제들을 가지게된다. 이러한 역해석 문제의 해결에는 정확한 정해석 풀이법과 효율적인 역해석 방법이 요구되어진다. 본 논문에서는 정해석 방법으로 유한요소법을, 역해석 방법으로는 전체 최적점을 발견할 가능성이 높은 유전 알고리즘을 최적화 방법으로 사용하였다. 기존의 역해석 문제의 해결책으로 제시되어왔던 기울기 방법에 기반한 결정론적 최적화 알고리즘들이 지니고 있는 국소해로의 수렴, 즉 단순한 전기비저항 분포의 불연속성 확인이라는 한정된 정보의 획득을 넘어서 실제 전기비저항 분포와 가장 가까운 분포는 전체 최적점 근처에서 발견될 수 있음을 보이고자 한다. 이러한 전기비저항 분포의 역해석적인 규명을 간단한 2차원 수치해석문제를 풀어보므로서 확인해본다.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.107-115
• /
• 2000

We suggest a method which solves the planar, two vehicle collision reconstruction problem. The method based on the Principle of impulse and momentum determines the pre-impact velocity components from Post-impact velocity components, vehicle Physical data and collision geometry. A novel feature is that although the impact coefficients such as the restitution coefficient and the impulse ratio are unknown, the method can estimate automatically the coefficients and calculate the pre-impact velocity components. This reverse calculation is important for vehicle accident reconstruction, since the pre-impact velocities are unknown and Post-impact Phase is the starting Point in a usual collision analysis. However. an inverse solution is not always Possible with the analytical rigid-body impact model. Mathematically, one does not exist under the common velocity condition. On the other hand, our method has a capability of reverse calculation under the condition if the absorbed energy during the collision process can be estimated using the crush profile. To validate the developed collision reconstruction a1gorithm, we use car-to-car collision test results. The analysis and experimental results agree well in the impact coefficients and the Pre-impact velocity components.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.296-305
• /
• 1999

In ordinary back analysis it if hardly possible to obtain the mechanical properties of tunnel lining by using commonly measured displacements of tunnel lining, because only a few displacements could be measured at the site. Therefore, it is necessary to develop a new method which can evaluate the state of stresses of tunnel by using measured data. In this study, in order to assess tunnel lining stability by estimating its stresses with a few measured displacements, a formulation of back analysis method was proposed. The accuracy of results were investigated through the parametric study for several types of measurement model of two dimensional elastic lining. This new back analysis method to assess tunnel lining stresses and strains with a few numbers of measured displacements showed high accuracy and good applicability when compared to the results of numerical experiments by FEM. The method has been tested on subway tunnel and its applicability has been confirmed by comparing field and analytical data. It is verified that the stress on the tunnel lining can be obtained by only more than 3 point of input displacements without any condition of external loads.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.81-87
• /
• 2008

This study is about the back analysis to optimize the uncertain parameters of geotechnical properties used in stability analysis of cut and cover tunnel. The Simplex algorithm, Powell algorithm, Rosenbrock algorithm, and Levenberg-Marquardt algorithm are applied for artificial problems of ground excavation. Furthermore, results are compared in the matter of the reliability of optimal solutions with a certain accuracy and the computation speed for evaluations of variables. As shown in results of numerical analysis, all of four algorithms are converged to exact solution satisfying the allowable criteria. And Levenberg-Marquardt's and Rosenbrock's algorithms are identified to be the more efficient methods in the evaluations of functions. After the back analysis for Poisson ratio and Young's modulus for cut and cover tunnel has been performed, design parameters have been correctly estimated and computation time has been improved while the number of measure points is increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.127-127
• /
• 2012

수자원분야에서 강우-유출의 정확한 해석은 홍수분석 및 수자원 이용의 측면에서 중요한 과제이다. 또한, 강우-유출 해석에서 유역의 지형인자 및 수문 매개변수의 산정은 홍수량 산정을 위하여 매우 중요하며, 이와 관련된 연구도 많이 진행되었다. 이에 비하여 홍수량 산정 시 첨두유량 및 첨두시간에 큰 영향을 미치는 소유역 분할에 관한 연구는 최근 들어서야 많이 진행되고 있으며, 다른 강우-유출해석 연구에 비하여 상대적으로 부족한 실정이다. 본 연구에서는 소유역 분할에 따른 유출변화를 분석하기 위하여 시험유역으로 평창강, 청미천, 안동댐 및 임하댐 유역을 선정하였으며, 유출분석 방법으로 집중형 모형인 Clark 방법과 준 분포형 유출모형인 ModClark(Modified Clark) 방법을 이용하여 강우-유출을 모의하였다. 또한, 소유역 분할이 첨두유량과 첨두시간에 미치는 영향을 판단하기 위해 유출 매개변수의 보정과정을 거치지 않고 강우-유출을 모의하였다. ModClark 방법으로 모의 시 관측된 강우 자료를 전 유역에 걸쳐 분포시키기 위하여 IDW(Inverse Distance Weighted) 방법을 사용하였고, 공간적으로 분포된 강우자료와 지형자료를 이용함으로써 모의결과에 대한 정확도를 높이는 한편, 강우-유출 모형에서 소유역의 분할 개수에 따라 모의된 유출 형태의 변화 양상을 검토하고 실측수문곡선과 비교하였다. 소유역 분할에 따른 유출모의 결과 대체적으로 분할개수가 증가함에 따라 첨두유량은 증가하고 첨두시간은 감소하는 경향이 나타났으나, 첨두유량 및 첨두시간 모두 각각 일정분할 개수 이상에서는 변동 경향이 감소하는 것으로 나타났다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.345-348
• /
• 2011

구조요소의 설계에서 유한요소해석은 매우 효과적인 방법이다. 이 방법은 시험 수행에 드는 시간과 비용을 줄여준다. 그러나 공정 과정과 환경에 의하여 생기는 입력 물성치들의 변화 때문에 우리는 유한요소해석의 결과를 전적으로 믿어서는 안 된다. 따라서 유한요소해석의 신뢰성을 증명하는 것은 매우 중요하다. 본 연구에서는 현장에 축적된 피로 수명 시험 데이터를 바탕으로 유한요소해석을 이용하여 피로수명 파라미터를 역 추정 하는 연구를 수행하였다. 베이지안 접근법을 이용하여 불확실성 피로 수명 파라미터의 사후분포를 구하였고, 마코프체인몬테카를로(Markov Chain Monte Carlo) 기법을 이용하여 역 추정된 파라미터의 샘플 데이터를 생성하였다. 얻어진 샘플 데이터를 기반으로 새로운 형상의 스프링에 대한 피로 수명을 예측한다. 신뢰성 기반 형상 최적화(RBDO)는 서스펜션 코일 스프링의 요구수명을 만족시키기 위하여 수행된다. 또한 크리깅 근사 모델은 유한요소해석의 연산 량 감소를 위해 이용한다.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.247-259
• /
• 1998

Analyses which loads were regarded as instant load and gradual step load were performed with data measured on gradually loaded field, and the results were inspected to find effect of load condition, and final settlements predicted by Hyperbolic, Tan's, Asaoka's, and Monden's method were compared with each other. According to above analyses, the following conclusions were obtained. Settlement curves which loads were regarded as instant load and gradual step load were beginning to coincide at time of twice duration of embankment. On the ground installed vertical drain, the result of Hyperbolic, Tan's, Asaoka's, Monden's, curve fitting I, and curve fitting II (simple, Carrillo) methods make conclude that Asaoka, curve fitting I, and curve fitting II methods agree with measured settlement.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.40-45
• /
• 1998

There are two kinds of methods in the analysis of ship motion in irregular waves. The one is the spectral method in which the ship motion is assessed with spectral of irregular waves times R.A.O. of a ship. The other is, so called, time domain analysis, in which the irregular waves are used directly in the equation of ship motion to calculate the responses. In this paper, both methods are applied for the calculation of course keeping motion of a ship in irregular waves with auto-pilot control. And, the differences and useful1ness of the two methods in the assessment of auto-pilot system are compared.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.679-688
• /
• 2010

The major objective of the present study is to extend the applications of inverse analysis to more realistic engineering fields with a complex combustion process rather than the traditional simple heat-transfer problems. In order to do this, the unknown initial mass fractions of $CH_4/O_2$ are estimated from the temperature measurement data by inverse analysis in the practical diffusion-controlled turbulent combustion problem. In order to ensure efficient inverse analysis, the repulsive particle swarm optimization (RPSO) method, which belongs to the class of stochastic evolutionary global optimization methods, is implemented as an inverse solver. Based on this study, it is expected that useful information can be obtained when inverse analysis is used in the diagnosis, design, or optimization of real combustion systems involving unknown parameters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.393-399
• /
• 2013

In this paper, a novel approach to estimate cohesive laws for the mode I fracture of the graphene is presented by combining molecular dynamic simulations and an inverse algorithm based on field projection method and finite element method. The determination of crack-tip cohesive laws of the graphene based on continuum mechanics is a non-trivial inverse problem of finding unknown tractions and separations from atomic simulations. The displacements of molecular dynamic simulations in a region far away from the crack tip are transferred to finite element nodes by using moving least square approximation. Inverse analyses for extracting unknown cohesive tractions and separation behind the crack tip can be carried out by using conservation nature of the interaction J- and M-integrals with numerical auxiliary fields which are generated by systematically imposing uniform surface tractions element-by-element along the crack surfaces in finite element models. The preset method can be a very successful approach to extract crack-tip cohesive laws from molecular dynamic simulations as a scale bridging method.