• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.117-123
• /
• 2009

The mechanical behavior of a micropile due to horizontal load has not yet clearly identified in Korea. It has generally estimated from that of a traditional pile because there is no standard method even though it has shorter length. To tell the truth, its behavior is very different from a traditional pile's. Specifically, it is general fact that horizontal resistance of earth is one of the main factors to control the mechanical behavior of micropile. To this reason, a laboratory model has been made in this study to estimate the behavior of a micropile which loaded increasingly horizontally. The laboratory model has been designed to estimate both the behavior of load to displacement and skin friction to displacement. And the analysis of the latter was compared with the solution of strain wedge model. In the end, it was proved that the mechanical behavior of a micropile should be estimated from considering the horizontal resistance of earth.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.281-294
• /
• 2012

The current status of the computer codes for the analysis of coupled thermal-hydrological-mechanical behavior occurred in a high-level waste repository was investigated. Based on the reported results on the comparison between the predictions using the computer codes and the experimental data from the in-situ tests, the reliability of the existing computer codes was analyzed. The presented codes simulated considerably well the coupled thermal-hydrological-mechanical behavior in the near-field rock of the repository without buffer, but the predictions for the engineered barrier system of the repository located at saturated hard rock were not satisfactory. To apply the current thermal-hydrological-mechanical models to the assessment of the performance of engineered barrier system, a major improvement on the mathematical models which analyze the distribution of water content and total pressure in the buffer is required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.101-113
• /
• 2013

This paper intends to develop mechanical analysis models that are able to predict complete nonlinear behavior in the bolted connector subjected to cyclic loads. In addition, experimental data which were obtained from loading tests performed on the T-stub connections are utilized to validate the accuracy of analytical prediction and the adequacy of numerical modeling. The behavior of connection components including tension bolt uplift, bending of the T-stub flange, stem elongation, relative slip deformation, and bolt bearing are simulated by the multi-linear stiffness models obtained from the observation of their individual force-deformation mechanisms in the connection. The component springs, which involve the stiffness properties, are implemented into the simplified joint element in order to numerically generate the behavior of full-scale connections with considerable accuracy. The analytical model predictions are evaluated against the experimental tests in terms of stiffness, strength, and deformation. Finally, it can be concluded that the mechanical models proposed in this study have the satisfactory potential to estimate stiffness response and strength capacity at failure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.26-29
• /
• 2009

매크로 스케일(macro-scale)에서 구조재료의 거동을 보다 자세히 이해하기 위해서는 구조재료를 구성하고 있는 마이크로 스케일(micro-scale)에서의 미세구조에 대한 이해가 필요하다. 특히 다결정을 가진 다상재료는 상(phase) 분포 상태에 의해 그 특성이 다르기 때문에, 상 분포에 따른 재료의 특성을 이해하는 것이 중요하다. 본 연구에서는 미세구조의 상 분포 특성을 묘사할 수 있는 상관관계 함수를 이용하여 미세구조의 상 분포 상태를 나타내고, 이를 활용한 미세구조 재구성 방법을 사용하여 2상 미세구조에서 특정 미세구조와 유사한 상 분포를 가진 미세구조를 생성하고 그 특성을 비교하였다. 그리고 다양한 상 분포를 가진 미세구조들에 유한요소해석 기법을 적용하여 미세구조의 역학적인 거동을 분석하였다. 이를 통해, 제한된 정보를 이용하여 통계학적으로 유사한 특성을 나타내는 미세구조를 모델링 할 수 있음을 검증하였고, 이러한 미세구조들 간의 역학적 거동은 서로 거의 동일함을 확인하여 미세구조 재구성 기법이 재료의 역학적인 거동을 예측하는데 유용하게 사용될 수 있음을 확인하였다.

• Journal of the KSME
• /
• v.56 no.4
• /
• pp.32-36
• /
• 2016

이글에서는 재료거동과 파괴역학에 관한 현재의 연구동향을 개괄적으로 살펴보고 최근 주목을 받고 있는 신기술과 관련하여 재료거동과 파괴역학 분야에서 담당할 필요가 있는 연구과제들에 대하여 살펴본다.

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.184-193
• /
• 1998

In order to dispose radioactive wastes safely, it is needed to understand the mechanical, thermal, fluid behavior of rockmass and physico-chemical interactions between rockmass and water. Also, the knowledge about mechanical and hydraulic properties of rocks is required to predict and to model many conditions of geological structure, underground in-situ stress, folding, hot water interaction, intrusion of magma, plate tectonics etc. This study is based on researches about rock mechanics issues associated with a waste disposal in deep rockmass. This paper includes the mechanical and hydraulic behavior of rocks in varying temperature conditions, thermo-hydro-mechanical coupling analysis in rock mass and deformation behavior of discontinuous rocks. The mechanical properties were measured with Interaken rock mechanics testing systems and hydraulic properties were measured with transient pulse permeability measuring systems. In all results, rock properties were sensitive to temperature variation.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.242-255
• /
• 2020

The numerical simulations of Heater Experiment-D (HE-D) at the Mont Terri rock laboratory in Switzerland were performed to investigate an applicability of FLAC3D to reproduce the coupled thermo-hydro-mechanical (THM) behaviour in Opalinus Clay, as part of the DECOVLEX-2015 project Task B. To investigate the reliability of numerical simulations of the coupled behaviour using FLAC3D code, the simulation results were compared with the observations from the in-situ experiment, such as temperature at 16 sensors, pore pressure at 6 sensors, and strain at 22 measurement points. An anisotropic heat conduction model, fluid flow model, and transversely isotropic elastic model in FLAC3D successfully represented the coupled thermo-hydraulic behaviour in terms of evolution for temperature and pore pressure, however, performance of the models for mechanical behavior is not satisfactory compared with the measured strain.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.197-207
• /
• 2006

The engineering performance of a high level waste repository is significantly dependent upon the T-H-M behavior in the engineered barrier system. An engineering-scale test facility (KENTEX) was set up to validate the T-H-M behaviors in the buffer of a reference disposal system developed in the 2002. The validation tests started on May 31, 2005 and is now in progress. The KENTEX facility and validation test programme are introduced, and pre-operation calculations are also presented to give information on the sensitive location of sensors and operational conditions. This test will provide information (e.g., large-scale apparatus, sensors, monitoring system etc.) needed for 'in-situ' tests, make the validation of a T-H-M model for the T-H-M performance assessment of the reference disposal system, and demonstrate the engineering feasibility of fabricating and emplacing the buffer of a repository.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.55-69
• /
• 2011

The importance of unsaturated state in various geo-engineering problems has led to the advance of mechanical constitutive model emulating behavior of unsaturated soils in response to thermo-hydro-mechanical loading. Elasto-plastic mechanical constitutive model for unsaturated soil is formulated based on Bishop's effective stress. Effective stress and temperature are main variables in constitutive equation, and incremental formulation of constitutive relationship is derived to compute stress update and stiffness tensor. Numerical simulations involving coupled THM processes are conducted to discuss numerical stability and applicability of developed constitutive model: one-dimensional test, tri-axial compression test, and clay-buffering at high level radioactive waste disposal. Numerical results demonstrated that developed model can predict very complex behavior of coupled THM phenomena and is applicable to geo-engineering problems under various environmental conditions, as well as interpret typical behavior of unsaturated soils.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.291-300
• /
• 2000

암반은 여러 가지 지질학적 요인들에 의해 형성된 수많은 절리면들을 경계로 하는 다양한 크기와 형상의 암석블럭들이 맞물려 평행상태를 이루고 있는 불연속체이다. 불연속 암반의 거동은 암석블럭을 이루는 무결암의 역학적 특성뿐만 아니라 암석블럭의 경계를 이루는 절리면들의 공간적 분포특성과 역학적 특성에도 큰 영향을 받는다. 불연속 암반의 거동해석을 목적으로 개발되고 있는 최근의 수치해석 기법들도 대부분 절리면의 영향을 효과적으로 해석에 반영시킬 수 있는 방법을 찾는데 집중하고 있다.(중략)