• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.6
• /
• pp.413-427
• /
• 1991

Variability of sea levels at Mukho and Ullungdo and sea level difference(SLD) associated with current is investigated. Time series of adjusted sea levels at both places have very similar pattern of change. Two components appear to contribute to the correlation between sea level and SLD. Low frequency thermosteric effect causes the sea level to rise and fall at the same time. Geostrophic effect of major currents is responsible for the sea level change in opposite ways at both sides. Two contributions have a cancelling effect for sea level change at Mukho while they are additive at Ullungdo. Characteristics of time series in frequency domain are divided into two parts with respect to 0.01 cycles per day(cpd). At Mukho, the cancelling effect yields small values of coherence for low-frequency bands whereas the dominant geostrophic influence may be responsible for the phase relations of about $\pm 180^{\circ}$ between sea level and SLD at higher frequency. Bimonthly dynamic height difference(DHD) between Mukho and Ullungdo is very significantly correlated with SLD. This result suggests that DHD thus the average velocity of current through the Mukho-Ullungdo section can successfully be diagnosed by the sea level records at both locations. For the annual variations, maximum SLD occurs at Mukho-Ullungdo section about 40 days later than the Korea Strait.

• Tunnel and Underground Space
• /
• v.14 no.3
• /
• pp.215-228
• /
• 2004

Rock mass contains discontinuities such as faults and joints, and their mechanical properties and spatial distribution dominate the stability of rock mass. Because the deformation of rock mass occurs discontinuities in many cases. However in the case of poor quality rock mass under high stresses, the deformation along intact rock can also influence the structure's stability. In this study, two dimensional finite element program was developed with a rheological model to analyze the stability of the structure excavated in jointed rock mass. The “equivalent material” approach was used assuming intact rock, joints and rock bolts as visco-plastic materials. The program was verified by analysing an intact rock model, a jointed rock mass model and a reinforced jointed rock mass model. The displacement was examined in each model with changing the intact rock behaviour as elastic and visco-plastic. In the case of poor quality rock mass under high stresses, e assumption of visco-plastic behaviour of intact rock resulted in larger displacement than when assuming elastic behaviour for intact rock. Therefore it is recommended to add intact rock's visco-plastic behaviour to the existing model, which only assumes visco-plastic behaviour of joints and rock bolts.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.379-393
• /
• 2019

For the economical construction of a tunnel by TBM, the selection of TBM optimized with the various project conditions is important, and also necessary to predict the performances of selected TBM in advance. This study was conducted to comprehensively evaluate the performance of the EPB shield TBM screw conveyor by the discrete element method. The sticky particles were used for the excavated material models, and screw conveyor with 11 different inclined angles were simulated to evaluate the performance depending on the different inclined angles. The four different rotational speed conditions of the screw were used, and torque, required power, extra energy for muck discharge, and the muck discharge rate were selected as four performance indicators. As a result, the optimized inclined angle was selected, and selected angle accords with the fact that EPB shield TBM screw conveyor is generally installed and adjusted at the inclined angle between 20.0° and 30.0° in the field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.412-423
• /
• 2000

By using the relation between stress intensity factor and AE parameter, new approach method for assessing the crack length and detectability of crack was proposed. Laboratory experiment was carried out to identify AE characteristics of fatigue cracks for compact tension specimen. The relationship between a stress intensity factor and AE signals activity as well as conventional AE parameter analysis was discussed. As a result, the features of specific parameter such as the length of crack growth the AE energy, the AE peak amplitude, and the cumulative AE hits, showed the almost same trend in their increase as the number of fatigue cycle increased. From the comparisons of peak amplitude and AE energy with stress intensity factor, it was verified that the higher stress intensity factors generated AE signals with higher peak amplitude and a larger number of AE counts. If we can get more reliable database for the relation between AE parameters and stress intensity factor, this approach will provide a good information for evaluating both the existence of crack and the minimum detectable size of crack.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.1
• /
• pp.71-81
• /
• 2005

Objective : To elucidate the correlates of self-rated fatigue in Korean employees. Methods : The data for 10,176 (men, 7,984; women, 2,192; mean age, 34.2; SD: 8.8) employees recruited from a nationwide sample were examined. A structured questionnaire was used to measure the participants' fatigue, sociodemographics (sex, age, education, and marital status), job-related characteristics (work duration, grade at work, work hours, shiftwork, employment type, and magnitude of workplace), and health-related habits (smoking, drinking, coffee intake, and exercise). Two types of measurement for fatigue were used to evaluate the magnitude of fatigue: self-rated question and a standardized measurement tool (Multidimensional Fatigue Scale: MFS). Results : According to the self-rated fatigue, 32% of employees reported that they felt fatigue for the past two weeks, and 9.6% of males and 8.7% of females had experienced excessive fatigue (6 months or more). Hierarchical multiple regression analysis showed that fatigue measured by MFS was more common in women, younger, college or more graduated, single, and employees who do not regularly exercise. Fatigue was also associated with long work hours, and the size of the workplace (<1,000 employees). Conclusions : These results suggest that fatigue has been considered as a common complaint, and that it is affected by job-related factors like work hours and the workplace size as well as sociodemographics or health-related behaviors. Further research is needed to clarify the effects of fatigue on adverse health outcomes, work performance, work disability, sick absence and medical utilization, and to examine the relationship of job characteristics (e.g.: work demand, decision latitude) to fatigue.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.167-177
• /
• 2009

The purpose of this study was to investigate effect of golf shoe design on kinematic variables during golf swing. Five professional male golfers with shoe size 270mm were recruited for the study. Swing motion was collected using 8 high speed camera motion analysis at a sampling of 180Hz. Kinematic variables were calculated by EVaRT 4.2 software. Driver swing was divided into four events; El(adress), E2(top), E3(impact) and E4(finish). Time, peak velocity, velocity of center of mass, velocity of the foot and ankle angle during Phase 1(El-E2), Phase 2(E2-E3), and Phase 3(E3-E4) were analyzed in order to investigate the relationship between golf shoe design and swing performance. The findings indicated that type C golf shoes would be beneficial for stability and control of movement during address and swing performance. Furthermore, faster speed of golf shoes, center of mass, and both feet were observed with Type C golf shoes. It is expected that golfers with Type C golf Shoes provide greater force as they control the center of mass faster and increase rotational force during impact compared to other golf shoes.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.99-106
• /
• 2009

The purpose of this study was to determine whether hormone levels change knee laxity in healthy females. Twenty three healthy females were recruited for the study. Serum estradiol and progesterone levels were recorded three times during the subjects' menstrual cycles. The first measurements were taken between day 3 and 7 of the follicular phase and the second data collection coincided with ovulation, 24 to 48 hours after the estrogen surge detected by an ovulation predictor kits. Based on a 28 day cycle, the third data collection occurred approximately 7 days later during the luteal phase. Knee joint laxity was recorded at the same intervals with a KT 2000 arthometer. Hormone levels and phases were compared to passive knee joint laxity with multiple regression analysis. Estradiol and progesterone levels differed significantly across the three tests. Knee joint laxity increased during ovulation. Based on a multiple regression analysis, estradiol and progesterone levels predicts 77.9% to 80.9% of the laxity at 20lb and 30lb loads. An antagonistic relationship between estradiol and progesterone was found when testing for knee laxity. Serum hormone levels have moderate power in predicting knee joint laxity. Individual hormonal profiling in female athletes would allow researchers to access the structural properties of the ACL, such as the laxity which may provide beneficial information to understand female ACL injury mechanism in sports activity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.4
• /
• pp.335-344
• /
• 2006

In this paper a computer program was developed, which simulates the Li reduction process of PWR spent fuel, and the amount of a produced metal or chloride compound was calculated at the various amount of Li with the program. It establishes a database, which is composed of some characteristics related to a chemical reaction equation and thermodynamic data, and it calculates the transformed rate of PWR spent fuel oxide at the certain amount of Li by using the database as input data. As the results of the performance test of the program, it was validated that the transformed values of oxides, except for $Eu_2O_3$ and $Sm_2O_3$, were almost the same to within about a 6 % error with those calculated by the previous code and that the calculated amount of Li was also exactly consistent with the theoretical one, which is used for a complete reaction of each oxide in a single chemical reaction. A relationship between Li and the transformed metal of each oxide was analyzed on the basis of the quantities calculated with the verified development program. Of the results, when the amount of Li was given to be 250 mole, the 83.73 percentage of $UO_2$ was transformed into U while the remainder was still to be $UO_2$. In addition, it was appeared that the 297 mole of Li was needed to completely convert $UO_2$ into U.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.169-179
• /
• 1988

In the part 1, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's fall & winter fabrics were measured by KES-F system. Sorts of 90 commercial fabrics for women's fall & winter clothes were classfied into 39 silk and 51 polyester fabrics according to meterials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. Furthermore, there mechanical properties as well as their hand values were discussed in comparison with those values for kimono fabrics. The main results are summarized as follows; 1. The shape of silk fabrics in formation for weared clothes show a box-shaped silhouette. Polyester fabrics has a easy to shape-less and make a silhouette which goes along with the body. 2. Silk fabrics for Korean women's fall & winter clothes have ${\pm}1\sigma$ range of bending, shearing, surface properties and thickness as compared with kimono fabrics. 3. A wrinkle recovery and drapability of silk fabrics for Korean women's fall & winter clothes are inferior to kimono fabrics. On the other hand, the fabrics for Korean women's fall & winter clothes have conical-shaped silhouette based on higher bending rigidity. 4. Except for flexibility with soft feeling, a primary factor of mechanical properties contributes to the hand values of fabrics for Korean women's fall & winter clothes having no concern with materials were same as the women's summer fabrics. 5. As for the hand values of fabrics for Korean folk clothes, stiffness, anti-drape stiffness are larger than those of kimono fabric and stiffness, anti-drape stiffness, crispness of fabrics for Korean women's fall & winter clothes have smaller values as compared with Korean women's summer fabrics.

• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.387-393
• /
• 2015

Fault breccia, produced by fracturing and comminution of host rock during fault activity, is a common component within fault cores. Fault breccia may display a preferred orientationin accordance with the sense of motion on the fault. Here we use a numerical analysis technique to study the effects of the distribution and content of breccia in fault core on the elastic moduli. The analytical models are grouped into those in which breccias display a preferred orientation within fault core and those in which breccias are randomly oriented. The breccia compositions considered here are granite and shale, and the breccia contents are 10 wt%, 20 wt%, and 30 wt%. Our results show that for all the cases considered, differences in the deformation moduli fall within the range 0.1%~1.1% and differences in the elastic moduli fall within the range 0.02~0.4 MPa. Thus, the distribution and content of fault breccia have almost no effect on the elastic moduli.