• Solar Energy
• /
• v.13 no.2_3
• /
• pp.120-132
• /
• 1993

The purpose of this research is to study the characteristics of heat transfer in composite rotary heat pipe as modeled turbine rotating by a finite element analysis and experiment. Nu number, Re number, Pr number and dimensionless condensate layer thickness by thermal input and revolutions per minute were given as analysis factors. The comparison between calculated and experimental data showed similar tendency. Therefore the analysis method may be useful to predict the performance of composite heat pipe. The resistance on heat pipe showed the best effect of heat transfer by film condensation, by decreasing film condensation, the heat transfer rate from condenser was increased rapidly. The dimensionless condensate layer thickness according to Re number at given Pr number showed constant values, the dimensionless condensate layer thickness is proportionate to the square root of inverse of revolution number per minute. In this study Nu=A$({\delta}({\omega}/v)^{-1/2}Re^B)$ is used to the convection heat transfer coefficient and A=0.963, B=0.5025 were obtained as analysis predicts.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.218-223
• /
• 1982

Physicochemical properties and aging of chestnut, Castanea cretana(Eungi), starch were investigated. The starch granules were irregular oval shape with the ratio of short and long axis of 1 : 1.4 and the size of $2.9-21.4{\mu}$ (average $10\;{\mu})$). The starch showed a typical B-type X-type diffraction pattern. Amylose content and water binding capacity were 22.7% and 81.5%, respectively. The optical transmittance of 0.1% starch suspension increased rapidly from $55^{\circ}C$. The swelling power of the starch repidly increased betwen $55^{\circ}C$ and $60^{\circ}C$, and its increase slowed down thereafter. Amylograms of starch at 5% and 6% concentrations indicated that the starch was stable against heat and shear force. The viscosity at 6% concentration was over twice higher than that at lower concentration. The time constant(reciprocal of rate constant) for 45% starch gel stored at $21^{\circ}C$ was 1.68 days.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.390-394
• /
• 1992

Some enzymatic characteristics of the aflatoxin degrading factor produced extraceIlularly by Aspergillus awamori var. fumeus were investigated. When aflatoxin B1 was incubated with the culture filtrate of A. awamori var. fumeus. 60% of it was degraded within an hour. The degradation rate decreased with time and there was virtually no degradation after one hour. The apparent Michaelis constant ($K_m$) determined by Lineweaver-Burk plot was $10.2{\mu}M$. The optimum degradation was observed at $30^{\circ}C$ and pH 5. For the degradation, molecular oxygen seemed to be required. The degradation was enhanced by the $Co^{2+}$. but was inhibited by many other ions like $Fe^{2+}$, $Ca^{2+}$. $Mg^{2+}$, $Zn^{2+}$,$Cu^{2+}$, and $Ba^{2+}$, The presence of either KeN or metyrapone inhibited the reaction while that of $NaI0_4$ cytochrome C or NADPH showed no effect.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.766-771
• /
• 2007

In this research, we were going to make the function which can forecast the operating cost of metropolitan railroad that is performing a role of assistant highway within the city. In order to do this, based on service records of subway line 1st to 8th in Seoul, we extracted 23 variables which can affect to the operating cost, and we selected the final variable for estimate the function of operating cost from correlation among variables and influence analysis. Then, we performed regression analysis by stages using final variable. 6 independent variables are chosen for presuming the operating cost, and we obtained the final 3 variables (quantity of holding motor cars, peak quantity of possessed motor cars, and quantity of stations) as a result of regression analysis. Through this research, function of operating cost of metropolitan railroad has better applicability than existing preliminary validity, and it is used by further preliminary validity investigation and master plan or validity investigation which is accompanied by operation designing, thus we expect that it could make a great contribution to the priority order of investment for metropolitan railroad or process of policy decision.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.457-476
• /
• 2000

In this study, we have proposed a sampling method and an estimation method for efficiently estimating the mean of a population which has a linear trend. These methods involve drawing a sample by the so-called "centered balanced systematic sampling", which is an extension of systematic sampling, and then estimating the population mean with an adjusted estimator, not with the sample mean itself. We used the concept of interpolation in determining the adjusted estimator.\Ve compared the efficiency of the proposed estimator with those of the estimators from existing methods, under the expected mean square error criterion based on the infinite superpopulation model introduced by Cochran(1946). The proposed method is for use in the case when the sample size n(2 5) is an odd number and k(the reciprocal of the sampling fraction) is an even number. A good result was also obtained in an example using computer simulation. simulation.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.128-134
• /
• 1982

The electrical conductivity of n-type polycrystalline MnOx-Ti$O_2$ system containing 0.40, 0.80, and 1.60 mol % of manganese oxide has been measured from 100 to 400$^{\circ}$C and 1100 to 1300$^{\circ}$C under oxygen partial pressures of$10^{-8}\;to\;10^{-1}$ atm. Plots of log conductivity vs. reciprocals of absolute temperature at constant $Po_2$'s are found to be linear with an inflection, and the activation energies obtained from the slopes appear to be an enough average 0.18eV for the extrinsic and 3.70eV for the intrinsic. The log $\sigma$ vs. log $Po_2$ are found to be linear at $Po_2$'s of $10^{-8}\;to\;10^{-1}$atm. The conductivity dependences on $Po_2$at the two temperature regions are closely approximated by $\sigma{\propto}$Po_2$-1}6$ for the extrinsic and $${\sigma}{\propto}Po_2^{-1}4}$$ for the intrinsic, respectively. The predominant defects are believed to be Vo-2e' and $Ti^3$${\cdot}$interstitial at the extrinsic and intrinsic. From the interpretations of conductivity dependences on temperature and$Po_2$ , the conduction mechanisms and possible band models are proposed.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.123-129
• /
• 1990

The rate constants for the solvolysis of $trans-[Cr(en)_2Br_2]^+$ ion were determined by the spectrophotometric method in methanol-, ethanol-, acetone-, and acetonitrile-water mixtures, at 20, 25, 30, and 35$^{\circ}C$, respectively. The rate constants increased with increasing co-solvent compositions. The rate constant did not show any relation with the reciprocal of dielectric constant of the solvent-mixtures. The m values of Grunwald-Winstein equation for methanol-, ethanol-, acetonitrile-, and acetone-water mixtures are 0.109, 0.103, 0.101, and 0.095, respectively. A free energy cycle for the process from the initial state to the transition state in water and water + co-solvent mixtures shows that the change in solvation at the transition state has a dominant effect on the rate. From the above results, it is believed that the mechanism for the aquation of this complex is the Id mechanism.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.100-108
• /
• 2010

An autocorrelation method is used in pitch estimation. Autocorrelation values in time and frequency domains, which have different characteristics, correspond to the pitch period and fundamental frequency, respectively. We utilize an integrated autocorrelation method in time and frequency domains. It can remove the errors of pitch doubling and having. In the time and frequency domains, pitch period and fundamental frequency have reciprocal relation to each other. Especially, fundamental frequency estimation ends up as an error because of the resolution of FFT. To reduce these artifacts, interpolation methods are applied in the integrated autocorrelation domain, which decreases pitch errors. Moreover, only for the pitch candidates found in a time domain, the corresponding frequency-domain autocorrelation values are calculated with reduced computational complexity. Using linear interpolation, we can decrease the required number of FFT coefficients by 8 times. Thus, compared to the conventional methods, computational complexity can be reduced by 9.5 times.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.117-122
• /
• 1999

This study investigated the corrosion rate of aluminum in alkaline solution. It was performed to observe the effects of alloy element, alkalinity (KOH concentration), solution temperature, and inhibitor and its concentration in the solution. Among species of aluminum, AA-1050 showed the lowest corrosion rate due to its high purity $(>199\%)$, whereas alloys containing Mg anuor Mn were highly corroded, relatively. The corrosion rate could be reduced over than $50\%$ by saturating the solution with ZnO, while ZnAc did not work as an inhibitor. The inhibition effect of ZnO increased with increasing the alkalinity and solution temperature. It was found that the corrosion rate linearly increased with the concentration of KOH in first order and exponentially decreased with the inverse of the solution temperature. An analysis of the corroded material covered the surface of aluminum was made by SEM and EDS. According to the analytical results by using XRD, it was confirmed that $Al(OH)_3$ was produced from the corrosion of aluminum in KOH solution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.143-150
• /
• 1984

This paper is a study on effectiveness of weight in analytical positioning of oblique photography. Oblique photographies are more economical than normal photographies as it has a larger ground coverage and as it can be applied in situations where objects of interest are difficult to be approached. But the comparatively complex methods involved, present a problem in obtaining the desired results. In view of this fact, analytical rectification was applied in normalizing the oblique photographs. As oblique photographies are extensively used in slops and mountainous regions, a number of difficulties are encountered during the control surveying. The photocoordinates of the oblique photographs, taken at $30^{\circ}$, were weighted during rectification. They were weighted as inversely proportionate to the derived formular of ${\gamma}_y=f{\cdot}tan{\frac{\theta}{2}}+y_a$, the distance of each point from the isocenter along the Y axis. By applying the weights, coordinates errors conld be reduced and the error difference between oblique and normal photographs could be reduced upto 53.2%.