• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.115-119
• /
• 2007

We report electrokinetic streaming potential detection in a microchannel. Streaming potential, one of the representative electrokinetic phenomena, becomes noticeable either when the channel size reduces or when the concentration of electrolyte reduces. We suggest a triangular-shaped microchannel to enhance streaming potential. The triangular-shaped microchannel shows better performance than the straight one in terms of streaming potential. Couple of possible methods to enhance streaming potential is also discussed. Moreover, this type of channel and phenomenon can be applied to biological sensor application and energy transduction.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.109-112
• /
• 2011

In this paper, we proposed a planar reversed triangle monopole antenna for UWB(Ultra Wideband) communication. RF-60A substrate of 0.64 mm thickness and 6.15 relative permitivity and 0.035 mm conductor of thickness and loss tangent 0.0025 is used for implementation. We have used Ansoft $HFSS^{TM}$(High Frequency Structure Simulator) to simulate the proposed antenna. The proposed antenna showed return losses about -10 dB, nearly omni-directional radiation patterns and maximum gains are over -5 dBi at the frequency band from 3.1 GHz to 10.6 GHz for ultra wide band communication.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.267-268
• /
• 2019

본 연구에서는 신체밀착형 의복의 유행으로 맞음새가 우수한 의복의 중요성이 부각되고 있는 20대 나성을 대상으로, Size Korea의 제 7차 인체치수조사 계측데이터를 분석하여 전신 체형의 특성을 알아보고, 전신 체형을 유형화하고자 하였다. 이를 통해 20대 전반 남성의 의복 제작에 필요한 기초자료를 제공하고자 하였다. 20대 남성의 체형은 4개로 분류되었다. 유형 1은 둘레 및 너비요인의 적재량이 높고, 몸통길이와 발목/종아리 굵기, 엉덩이처짐 요인 높이 요인의 적재량이 낮은 '짧고 굵은 몸통새다리 체형'이다. 유형 2는 어깨너비와 길이, 몸통길이의 적재량이 높고, 둘레 및 너비와 어깨처짐 요인의 적재량이 낮으며, 높이요인의 적재량이 높은 '가는 역삼각형 체형'이다. 유형 3은 발목/종아리 굵기 요인의 적재량이 높고, 높이요인, 둘레 및 너비와 몸통길이 요인의 적재량이 낮은 '짧고 가는 몸통 굵은 다리 체형'이다. 유형 4는 높이요인과 엉덩이처짐, 어깨처짐 요인의 적재량이 높고 어깨너비와 길이 요인의 적재량이 낮은 '긴 삼각형 체형'이다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.105-106
• /
• 2021

본 연구에서는 전남 서남 지역에서 해양 레저스포츠를 즐기는 피험자를 대상으로 해양 레저스포츠 의류의 구매실태, 착용실태, 구매 만족도, 선택기준, 개선사항 등을 조사하여 연령, 체형 등과의 상관관계와 변인 간의 상관관계를 분석해보고자 하였다. 해양 레저스포츠 참여동기와 선택기준 간의 상관관계에서 체력증진을 위해 참여하는 경우 착용감을 기준으로 선택하고 여가나 취미생활을 위해서 참여할 경우에는 디자인, 색상을 기준으로 선택하였다. 선택기준과 구매 만족도와의 관계에서는 활동성이나 다른 용도 활용성을 기준으로 선택한 경우에 가격면에서 만족하지 못하였다. 체형에 따른 선택기준은 큰 삼각형과 사각체형은 가격, 유행을 기준으로, 역삼각형, 큰 삼각형, 사각 체형은 신축성을 기준으로 의류를 선택하였다. 추후 연구에서는 해양 레저스포츠 종목별 선호도에 대한 연구도 이루어져야 할 것으로 생각된다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.206-213
• /
• 2004

As far as an opening device of fishing gears is concerned, applications of a kite are under development around the world. The typical examples are found in the opening device of the stow net on anchor and the buoyancy material of the trawl. While the stow net on anchor has proved its capability for the past 20 years, the trawl has not been wildly used since it has been first introduced for the commercial use only without sufficient studies and thus has revealed many drawbacks. Therefore, the fundamental hydrodynamics of the kite itself need to ne studied further. Models of plate and canvas kite were deployed in the circulating water tank for the mechanical test. For this situation lift and drag tests were performed considering a change in the shape of objects, which resulted in a different aspect ratio of rectangle and trapezoid. The results obtained from the above approaches are summarized as follows, where aspect ratio, attack angle, lift coefficient and maximum lift coefficient are denoted as A, B, $C_L$ and $C_{Lmax}$ respectively : 1. Given the triangular plate, $C_{Lmax}$ was produced as 1.26${\sim}$1.32 with A${\leq}$1 and 38$^{\circ}$B${\leq}$42$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$${\leq}$B${\leq}$50$^{\circ}$, $C_L$ was around 0.85. Given the inverted triangular plate, $C_{Lmax}$ was 1.46${\sim}$1.56 with A${\leq}$1 and 36$^{\circ}$B${\leq}$38$^{\circ}$. And When A${\geq}$1.5 and 22$^{\circ}$B${\leq}$26$^{\circ}$, $C_{Lmax}$ was 1.05${\sim}$1.21. Given the triangular kite, $C_{Lmax}$ was produced as 1.67${\sim}$1.77 with A${\leq}$1 and 46$^{\circ}$B${\leq}$48$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$B${\leq}$50$^{\circ}$, $C_L$ was around 1.10. Given the inverted triangular kite, $C_{Lmax}$ was 1.44${\sim}$1.68 with A${\leq}$1 and 28$^{\circ}$B${\leq}$32$^{\circ}$. And when A${\geq}$1.5 and 18$^{\circ}$B${\leq}$24$^{\circ}$, $C_{Lmax}$ was 1.03${\sim}$1.18. 2. For a model with A=1/2, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Then there was a tendency of a very gradual decrease or no change in the value of $C_L$. For a model with A=2/3, the tendency of $C_L$ was similar to the case of a model with A=1/2. For a model with A=1, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. And the tendency of $C_L$ didn't change dramatically. For a model with A=1.5, the tendency of $C_L$ as a function of B was changed very small as 0.75${\sim}$1.22 with 20$^{\circ}$B${\leq}$50$^{\circ}$. For a model with A=2, the tendency of $C_L$ as a function of B was almost the same in the triangular model. There was no considerable change in the models with 20$^{\circ}$B${\leq}$50$^{\circ}$. 3. The inverted model's $C_L$ as a function of increase of B reached the maximum rapidly, then decreased gradually compared to the non-inverted models. Others were decreased dramatically. 4. The action point of dynamic pressure in accordance with the attack angle was close to the rear area of the model with small attack angle, and with large attack angle, the action point was close to the front part of the model. 5. There was camber vertex in the position in which the fluid pressure was generated, and the triangular canvas had large value of camber vertex when the aspect ratio was high, while the inverted triangular canvas was versa. 6. All canvas kite had larger camber ratio when the aspect ratio was high, and the triangular canvas had larger one when the attack angle was high, while the inverted triangluar canvas was versa.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.269-276
• /
• 2012

The aim of this study is to develop clothing size system according to each size interval for obese girls aged 10~12 by classifying the upper bodies. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. Results are as follows; 1st, 5 factors were extracted by factor analysis and 3 clusters were categorized by cluster analysis, cylinder-type, inverted triangle-type and inverted trapezoid-type. And 2nd, as a consequence of size system establishment, the basic body sizes and reference body sizes were different according to types even in commonly-appeared size names at sections of respective types. The research findings above suggest that it is necessary to figure out the obesity types according to height and bust girth sizes representing basic sizes and to design the patterns in consideration of the characteristics of obese body shapes. And it may be used as a basic data to decide the desirable output of production according to respective body types.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.1021-1030
• /
• 2004

The purpose of this study was to develop and make the head form by setting the region of the head for detailed measurement of the head to make the type of closely fit hat and typifying the head form of Korean women's with each region of the head based on the measurements of each region of the head according characteristics. A total of 285 Korean women's in the age group of 18 to 35 years old. It were measured through the direct measurement method by selecting 67 measurement items. As a result of the findings obtained from cluster analysis could be classified into 3 type. Type 1($46\%$) is U-shaped form, that is high in head height on sides and circumference is smallest, whose facial region and occiput is flattest of three types. Type 2($22.4\%$) is inverted triangle form, that is flat in head ridge, low in head height on sides and wide in the frontal width. Type 3($31.6\%$) is oval form, that is largest in size, has the projected occiput and is of three-dimensional form.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.443-453
• /
• 2008

The purpose of this study was to identify the perception between real and ideal body shapes of college students and to investigate the preferred body shape of college students. The research subjects numbered one hundred forty five male and female students, aged 20 to 29, who lived in Gwangju and Chonnam province. The anthropometric data was collected including both direct and indirect measurements. The data was analyzed by mean and standard deviation, t-test, and factor analysis. The results of t-test showed the significant difference($p{\leq}.001$) between real body size and ideal body size. The result showed that male students want to have bigger chest circumference and a taller height than their real body, the research also showed that the female students want to have a narrow bust and hip width along with a taller height than real body. Regarding ideal body shape, male students pursued bigger height and want an inverted-triangle body shape. On the other hand, female students pursued bigger height and slim body shape. This study established the factors(dimension of torso, height, the side shape of torso, and shoulder shape) as the perception between real and ideal body shapes. In terms of real body, the factor analysis shows two contrasting results in which the height is the most important factor for female students, while the torso dimension is the most important factor for male students. In terms of ideal body, the height factor is the most important for both the male and female students.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.255-266
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frames having non-seismic details. To do this, a building frame designed according to Korean seismic code and detailed in the Korean conventional practice was selected. A 1:12 scale plane frame model was manufactured according to similitude law. A reversed lateral load test and a monotonic pushover test were performed under the displacement control. To simulate the earthquake effects, the lateral force distribution was maintained to be an inverse triangle by using a whiffle tree. From the tests, base shears, crack pattern, local rotations in the ends of critical members and the relations between interstory drift versus story shear are obtained. Based on test results, conclusions are drawn on the implications of the elastic and inelastic behaviors of a high-rise reinforced concrete frame having non-seismic details.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.321-330
• /
• 2008

This study, geological survey was carried out in order to study on the geology, geological structure and volcanic activity of the Ulleung-do volcano body. Ulleung-do is the volcano body of about 3,000m heights from the East Sea seabed. The geology of Ulleung-do is divided into basaltic agglomerate, trachytic agglomerate, trachyte, trachytic pumice and trachyandesite in ascending orders. The faults in caldera of Nari Basin came to make the reverse triangle style in compliance with sinking. The faults in circumference of Nari Basin are ranging with northeast-southwest direction and northwest-southeast direction. The Quaternary volcanic activities in the Ulleung-do are divided into 5 activity period. The engineering geologists and the applied geologists were not easy to apply because complicated geology of Ulleung-do. Therefore, this study supplied simple geology of Ulleung-do for them.