• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.373-379
• /
• 2012

This study surveyed the image of hospital emergency medical technicians with 122 emergency medical service providers (doctors and nurses) working at tertiary medical institutions in Daejeon and Chungcheongnam.do in order to provide basic materials for enhancing the status and professional image of hospital emergency medical technicians. According to the results of this study, the overall image was $3.27{\pm}0.34$, and by its sub.area, professional image was highest and role image was lowest. By item, 'Maintain a friendly relations with doctors' was highest, and 'Arrogant and negligent in job performance' was lowest. In order to enhance their image, hospital emergency medical technicians need to assume a sincere attitude toward patients and colleagues consistently, to strengthen their professionalism, and to carry out their duties and roles faithfully. What is more, the association should take proper measures and to establish the sound image of emergency medical technician as a professional through active campaigns and monitoring using mass media.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.125-131
• /
• 2002

In this paper, a new concatenation scheme of serial concatenated convolutional codes is proposed and the performance analyzed. In the proposed scheme, each of information and parity bits of outer code is entered into inner code through interleaver and deinterleaver. Therefore, the interleaver size is same as the length of input frame. Since the interleaver size of proposed type is reduced to half of the conventional Benedetto type, the interleaver delay time required for iterative decoding is reduced. In addition the multiplexer and demultiplexer are not used in the decoder of the proposed type, the complexity of decoder can be also reduced. As results of simulation, the performance of proposed type shows the better error performance as compared to that of the conventional Benedetto type in case of the same interleaver size. And it can be observed that the difference of BER performance is increased with the increase of Eb/No. In case of the same length of input frame, the proposed type shows almost same performance with Benedetto type despite that the interleaver size is reduced by half.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.34-39
• /
• 2002

In this paper, we proposed novel photonic bandgap(PBG) structure using EGP(Elevated Ground Plane) and via in ceramic substrate of microstrip line. From analysis result, the proposed PBG structure is reduced 52.5% at size and increased 45 % at bandwidth compared to typical planar PBG structure. It is also reduced 32 % at size and improved more than 8 dB at power loss compared to typical multilayer DGS(Defected Ground Structure). The proposed PBG structure also can be used bandstop and lowpass filter and it will be useful for small microwave integrated circuit and module development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.151-158
• /
• 2018

This paper proposes a new design method for narrow bandpass filters using two cascaded hairpin step impedance resonators (SIRs) with wideband harmonic suppression. The proposed bandpass filter utilizes a suspended strip line (SSL) to maximize the characteristic impedance ratio, thereby maximizing the harmonic suppression bandwidth. As an example of the proposed design method, the SSL bandpass filter with a center frequency of $f_0=1.4GHz$ and fractional bandwidth of 5 % was implemented, and proved to suppress harmonics up to $7.5f_0$ with a passband insertion loss of approximately -0.9 dB. This result implies that the proposed SSL narrow bandpass filter (NBPF) can suppress the harmonic bandwidth more than two times as compared with the filter design on a microstrip line (MSL).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.680-687
• /
• 2009

In this paper, we propose a substrate integrated waveguide(SIW) power divider to yield excellent broadband isolation performance. In order to achieve high broadband isolation, a two stage Wilkinson power divider is employed in SIW. The measurement results show the insertion loss($S_{21}$, $S_{31}$ to be $4.0{\pm}0.5$ dB) and input return loss($S_{11}$ of 10 dB) from 13.12 GHz to 16.14 GHz. Moreover, the results show that the output return loss and isolation between output ports are larger than 10 dB between 10.37 GHz and 17.64 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1042-1049
• /
• 2009

Design and optimization of a broadband waveguide magic-T was performed for X-Band tracking radars. A multi-stepped conducting cylinder was used to enhance the bandwidth performance of the conventional waveguide magic-Ts. Particles swarm optimization in conjunction with genetic algorithm was employed to obtain the optimized geometrical parameters. The optimized design exhibits low reflection coefficient below -20 dB at all waveguide ports with frequency bandwidth of 12%. The transmission loss and difference are within 0.2 dB and 0.1 dB, respectively. Measured results are also shown to be in good agreement with the simulated results. Finally, the bandwidth performances for five and seven-stepped conducting cylinders are also investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.416-422
• /
• 2006

In this paper, we have designed and favricated the high gain and wideband microstrip patch antenna including IEEE 802.11a. To widen the bandwidth of microstrip antenna, firstly we have used the microstrip line-coaxial probe feeding method and inserted a U-slot in the rectangular patch. Secondly, to improve the antenna gain, we have used a $2{\times}2$ array structure. From the measured results, wideband characteristics of 1 GHz bandwidth($5.110{\sim}6.142$ GHz) for VSWR<2 was obtained. The measured eain was 13 dBi in both the E-plane and H-plane at the frequency of 5.15 GHz, 5.35 GHz, 5.50 GHz, and 5.85 GHz.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.135-143
• /
• 2005

The purpose of this study is to diminish the risk through identifying the risk factors occurring in the process of real estate development projects, and analyzing and coping with the risk factors, and enable stable advance in the development process by improving the roles and work distribution of the project investor. The results of this study are as follows : 1) identifying the risks of contractions from the step of selecting the sites must be made possible through supplemental human resources expertise in plan and construction of the operation 2) as an improvement scheme, heightening the penetration wall of development projects from the investors, proposing a registration law and a selection standard of construction companies to investors' cooperating companies enabling the growth of superior investors.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.1
• /
• pp.98-106
• /
• 2005

Groundwater plays an important role in water and carbon cycles in Gwangneung forest watershed located in a complex landscape. Because groundwater affects electrical resistivity (ER) of underground materials, the depth to water table and water content in subsurface can be investigated through measuring ER. Accordingly, the ER survey has been employed more frequently in recent hydrological investigations. Quantitative applications of the results of ER survey will contribute significantly to the examination of water budget closure at various spatiotemporal scales. This paper presents the preliminary results of the ER survey conducted at Gwangneung forest watershed to determine proper locations and depths of monitoring wells. Such use of ER survey, in conjunction with an integrated geophysical investigation and geographic information system, can provide more effective examination of underground structure and optimal locations of monitoring wells to further our understanding of the role of groundwater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1222-1228
• /
• 2010

This paper presents a design of the CMOS LDO regulator with a fast transient response for a high speed PMIC(power management integrated circuit). Proposed LDO regulator circuit consists of a reference voltage circuit, an error amplifier and a power transistor. 2-stage wide-band OTA buffer between error amplifier and power transistor is added for a good output stability. Although conventional source follower buffer structure is simple, it has a narrow output swing and a low S/N ratio. In this paper, we use a 2-stage wide-band OTA instead of source follower structure for a buffer. From HSPICE simulation results using a $0.5{\mu}m$ CMOS standard technology, simulation results were 16 mV/V line regulation and 0.007 %/mA load regulation.