• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.433-452
• /
• 2018

The shield tunneling method can minimize surface settlements by preventing the deformation of tunnel face and tunnel intrados due to tunnel excavation. For this purpose, it is very important to control the operating conditions of shield TBM. The face pressure and backfill pressure for tail void grouting should be the most important and immediate measure not only to restrain surface settlement, but also to influence the effective stress and pore water pressure around the circumstance of tunnel during excavation. The reaction of the ground to the application of face pressure and backfill pressure relies on the stiffness and permeability of ground. Especially, the reaction of saturated clayey ground formations, which shows the time-dependent deformation, is different from the permeable ground. Hence, in this paper it was investigated how the TBM operating conditions, ground stiffness, and permeability impact on the surface settlement of saturated clayey ground. For this purpose, a series of parametric studies were carried out by means of the stress-pore water pressure coupled FE analysis. The results show that the settlement of soft clayey ground is divided into the immediate settlement and consolidation settlement. Especially, the consolidation settlement depends on the ground stiffness and permeability. In addition, the existence of critical face pressure and backfill pressure was identified. The face pressure and backfill pressure above the critical value may cause an unexpected increase in the ground settlement.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.141-152
• /
• 2002

This paper is the result of the experimental and numerical research on the distribution of vertical earth pressure due to surcharge loads acting on cantilever retaining wall close to a rigid slope with a stiff angle. Centrifuge model experiments were performed with changing the roughness of adjacent slope to the wall, distance between the wall and the slope and gravitational levels. Vertical earth pressures were measured by earth cells embedded in the backfill of the wall. Test results of vertical earth pressures due to surcharge loads were compared with theoretical estimations by using two different methods of limit equilibrium and the numerical analysis. For limit equilibrium methods, the modified silo and the wedge theories, proposed by Chung(1993, 1997), were used to analyze test results. Based on those modified theories, the particular solution with the boundary condition of surcharge loads on the surface of backfill was obtained to find the vertical stress distributions acting on the backfill. FLAC with the hyperbolic constitutive model was also used for the numerical estimation. As a result of comparison of test results with theoretical and numerical estimations, distribution of vertical earth pressures obtained from centrifuge model tests is generally in good agreement with numerical estmated values by using FLAC whereas the wedge theory shows values close to test results in case the distance between the wall and the slope is narrow.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.13-20
• /
• 2009

The influence of steel fiber volume on the tension softening behavior in steel fiber-reinforced ultra high strength concrete was investigated. Three-point bending test (TPBT) with notched beams was performed and inverse analysis method by Uchida et al. was adopted to obtain the tension softening behaviors from the results of TPBT. It could be found that the intial stiffness was constant regardless of steel fiber volume, the increase of steel fiber volume fraction made the tensile strength higher, but all of the curves converged on an asymptote with a crack width. It was proposed the equation of softening curve expressed by combination of plastic behavior part and exponential descending behavior part considering the steel fiber volume fraction and $\omega_0$, which is corresponding to the maximum crack width of plastic area. Thereafter, the crack propagation analysis using finite element method with smeared crack model was also carried out and it was confirmed that the proposed equation had a good agreement with the experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1345-1350
• /
• 2014

This paper presented analysis methods for adapting E-glass fiber/epoxy composite (GFRP) materials to an automotive leaf spring. It focused on the static behaviors of the leaf spring due to the material composition and its fiber orientation. The material properties of the GFRP composite were directly measured based on the ASTM standard test. A reverse implementation was performed to obtain the complete set of in-situ fiber and matrix properties from the ply test results. Next, the spring rates of the composite leaf spring were examined according to the variation of material parameters such as the fiber angles and resin contents of the composite material. Finally, progressive failure analysis was conducted to identify the initial failure load by means of an elastic stress analysis and specific damage criteria. As a result, it was found that damage first occurred along the edge of the leaf spring owing to the shear stresses.

• Environmental and Resource Economics Review
• /
• v.24 no.1
• /
• pp.165-187
• /
• 2015

In this paper, we tested if the sewage subsidy from Korean Water Management Fund discourage sewage fee increase by Korean local governments, and consequently hinder water quality improvement. To examine this counter-incentive effect of Water manage Fund sewage subsidy, we estimated the effect of sewage subsidy on the ratio of sewage fee revenue to environmental treatment facilities' operation cost of local governments in 2009-12, using two-stage least square estimation. We found that the sewage subsidy has negative effect on the sewage fee revenue to sewage operation cost ratio. But, the statistical significance of this effect was sensitive to model specification. And the size was too small to conclude that the counter-incentive effect was economically significant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.421-424
• /
• 2008

Ultra high strength steel fiber-reinforced concrete is characterized with high tensile strength and ductility. This paper revealed the influence of fiber volume fraction on the tensile softening behaviour of ultra high strength steel fiber-reinforced concrete and developed tensile softening model to predict the deformation capacity by finite element method analysis with experimental results. The initial stiffness of ultra high strength steel fiber-reinforced concrete was constant irrespective of fiber volume fraction. The increase of fiber volume fraction improved the flexural tensile strength and caused more brittle softening behaviour. Finite element method analysis proposed by Uchida et al. was introduced to obtain the tensile softening curve from three point notched beam test results and we proposed the tensile softening model as a function of fiber volume fraction and critical crack width.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2016

A new algorithm for determining optimal accelerometer locations is proposed by using a frequency-domain Hankel matrix which is much simpler to construct than a time-domain Hankel matrix. The algorithm was examined through simulation studies by comparing the outcomes with those from other available methods. To compare and analyze the results from different methods, a dynamic analysis was carried out under seismic excitation and acceleration data were obtained at the selected optimal sensor locations. Vibrational amplitudes at the selected sensor locations were determined and those of all the other degrees of freedom were determined by using a spline function. MAC index of each method was calculated and compared to look at which method could determine more effective locations of accelerometers. The proposed frequency-domain Hankel matrix could determine reasonable selection of accelerometer locations compared with the others.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.79-79
• /
• 2020

기존과 현행 수자원 관련 의사결정은 법, 정책 및 규정의 틀에서 이루어진다. 그러나 우리나라에서 재현되고 있는 물의 사회적 현안과 갈등들을 생각할 때 이들 의사결정을 위한 틀이 충분한 역할을 하고 있는가에 의문을 제시하고 다른 길을 모색할 필요가 있다. 본 논문은 물 의사결정과 행동을 주도하기 위한 기존 틀의 보완책 또는 새로운 대안으로 섬진강 유역의 수자원 이용 사례를 통하여 물 윤리의 도입과 제도화를 제안한다. 물 윤리(water ethics)는 물 정책, 관리 및 실무 등 실제행동의 복잡한 환경에서 우리의 가치를 적용하기 위해 채택하는 원칙이다. 대부분 물 윤리적 행동선택은 여러 개의 상충되는 가치를 포함하고 있어 원칙이 필요하며, 존중할 가치와 무시할 가치를 선택해야한다. 또한 이러한 가치 결정을 신속하고 효율적으로 수행하여 물 갈등해소를 지원할 필요가 있다. 물 윤리의 가치 영역은 환경, 사회, 경제, 문화, 거버넌스 등 5개로 분류할 수 있다. 섬진강 유역에는 1960년 이후 경제발전을 위하여 섬진강댐, 주암댐, 보성강댐, 동복댐, 동화댐 등 6개의 댐이 건설되었고, 이들 댐에서 확보한 수량의 60%는 섬진강 유역 외의 생·공용수, 농업용수 및 발전용수로 도수되고 있다. 송정지점을 기준으로 연평균 유출량은 댐건설 전·후에 40%로 감소한 것으로 추정되었다. 물 윤리 차원에서 이들 정책은 1960년 정부가 추구했던 경제 가치에 최우선하는 물 관리라고 할 수 있다. 이러한 물 관리는 하류로 흘러가는 수량의 부족을 초래하여 하구 생태계 훼손을 초래하였다. 특히 하구 기수역에서 상류 유입량 감소로 인한 염수의 유입으로 재첩의 생태환경이 악화되어 전통적인 재첩채취 어업문화를 이루어 왔던 어민들이 고충을 겪고 있다. 물 윤리 차원에서 섬진강의 물 관리는 경제와 함께 환경, 사회, 문화 및 거버넌스 가치의 비중을 높일 필요가 있다. 또한 하구의 환경생태 가치 보전에 필요한 환경유량을 확보하기 위해 공업용수와 농업용수 이용 효율성(재이용, 절약, 경제성), 생활용수의 수요관리, 공급시설의 최적 운영 전략을 물 윤리적 차원에서 평가해야한다. 최종적으로 확보된 환경유량의 효과적 활용을 위하여 그동안 물 관리에서 소외되었던 어민을 포한한 지자체, 수공·농어촌공사·한수원 물 관리기관, 중앙정부 등 이해관계기관의 거버넌스 가치를 높여야한다.

• Information Systems Review
• /
• v.18 no.1
• /
• pp.141-155
• /
• 2016

This study identified terminologies related to the proximity and frequency of disaster by social network analysis (SNA) and text mining, and then expressed the outcome into a mind map. The termdocument matrix of text mining was utilized for the terminology proximity analysis, and the SNA closeness centrality was calculated to organically express the relationship of the terminologies through a mind map. By analyzing terminology proximity and selecting disaster response-related terminologies, this study identified the closest field among all the disaster response fields to disaster response and the core terms in each disaster response field. This disaster response terminology analysis could be utilized in future core term-based terminology standardization, disaster-related knowledge accumulation and research, and application of various response scenario compositions, among others.