• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.743-747
• /
• 1996

A Potential Field Method is applied to the proposed algorithm for the planning of collision-free paths of redundant manipulators. The planning is carried out on the base of kinematic configuration. To make repulsive potentials, sources are distributed on the boundaries of obstacles. To escape from local minimum of the main potential and to attack other difficulties of the planning, various potentials are defined simultaneously, Inverse Kinematics Problems of the redundant manipulators are solved by unconstrained optimization method. Computer simulation result of the path planning is presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.326-330
• /
• 1986

Some of computational algorithms for the kinematic control of redundant manipulators are investigated and analyzed by extensive computer simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.144-153
• /
• 1997

The inverse kinematics problem of a reclaimer which excavates and transports raw materials in a raw yard is investigated. Because of the geometric feature of the equipment in which scooping buckets are attached around the rotating disk, kinematic redundancy occurs in determining joint variable. Link coordinates are introduced following the Denavit-Hartenbery representation. For a given excavation point the forward kinematics yields 3 equations, however the number of involved joint variables in the equations is four. It is shown that the rotating disk at the end of the boom provides an extra passive degree of freedom. Two approaches are investigated in obtaining inverse kinematics solutions. The first method pre-assigns the height of excavation point which can be determined through path planning. A closed form solution is obtained for the first approach. The second method exploits the orthogonality between the normal vector at the excavation point and the z axis of the end-effector coordinate system. The geometry near the reclaiming point has been approximated as a plane, and the plane equation has been obtained by the least square method considering 8 adjacent points near the point. A closed form solution is not found for the second approach, however a linear approximate solution is provided.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.3
• /
• pp.253-261
• /
• 2015

A parallel mechanism with redundancy can be regarded as a means for not only maximizing the benefits of parallel mechanisms but also overcoming their drawbacks. We proposed a novel parallel mechanism by eliminating an unnecessary degree of freedom of the configuration space. Because of redundancy, however, the solution for the inverse kinematics of the developed parallel mechanism is infinite. Therefore, we defined a cost function that can minimize the movement time to the target orientation and found the solution for the inverse kinematics by using a numerical method. In addition, we proposed a method for determining the boundary of the geometric singularity in order to avoid singularities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1581-1584
• /
• 1997

This paper poropsed an efficient optimization technuque to resolve redundancy and a trajectory planning for a high precision control using proposed optimization technique. The proposed techniqus is the joint disturbance torque optimizatioin considering redundancy in the joing servo control. Joint disturbance torque is not unknown it is described dynamic equation ignored friction and viscosity. The proposed technique is used the dynamic equatiion included the joint disturbance torque characteristics. Numerical example of 3 joint planar redundant robot manipulator is simulated. In the 2-norm minimization of joint disturbance torque we compared pseudoinverse local optimization with proposed technique, and the results showed better the proposed technique. So the proposed technique can be highly precision controlled redundant robot manipulators in the joint servo control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.249-256
• /
• 1999

The conventional robot manipulability is decomposed into linear manipulability and angular manipulability so that they may be analysed and visualized in easy way even in the case of 3 dimensional task space with 6 variables. After the Jacobian matrix is decomposed into linear part and angular part, constraint on joint velocities is transformed into linear task velocity and angular task velocity through the decomposed Jacobian matrices. Under the assumption of redundant robot manipulators, several optimization problems which utilize the redundancy are formulated to be solved by linear programming technique or sequential quadratic programming technique. After deriving the solutions of the optimization problems, we give graphical interpretations for the solutions.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.767-770
• /
• 1991

For the control of redundant manipulators, conventional dynamic control methods of local torque optimization showed the instability which resulted in physically unrealizable torque requirements. In this paper, a new dynamic control method which is based on the concept of aspects is proposed. The proposed method starts with the basic understanding of the minors in the Jacobian matrix. It was shown by computer simulations that the proposed method demonstrates a drastic reduction of torque loadings at the joints in the tracking motion of a long trajectory, and thus guarantees the stability of joint torque.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.7
• /
• pp.42-51
• /
• 1992

This paper suggests a measure constraint locus which is the loci of points satisfying the necessary constraint for optimality of a measure in the configuration space. The characterization of four measures for singularity avoidance is worked out by using the measure constraint locus. It gives a global look at the performance of an inverse kinematic algorithm whien each of measures in a kinematically redundant robot is used. The invertible workspace without singularities and the topological properties both on the configuration and operational spaces are analyzed. We discuss also some limitations, based on the topological arguments of measure constraint locus, of the inverse kinematic algorithms, and compare global properties of each of measure. Therfore, a new concept called measure constraint locus gives a methodology for obtaining a conservative joint trajectory without singularities for almost entire workspace.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.103-106
• /
• 2001

A new control method for a redundant manipulator is developed using a local optimal torque and null space joint velocity. By solving the dynamic control equations of the system, the local optimal torque is obtained. If only the local optimal torque is used for controlling the robot there is a possibility that the system is unstable. To eliminate the characteristics of instability during the movements, the control law with a null space concept is used. The new method is applied to the 3-DOF planar manipulator. The simulation results show the effectiveness of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2284-2296
• /
• 1994

Force control of robotic mechanisms continues to be a challenging area. Previous implementation have seldom produced satisfactory results, and researchers in the past have experienced significant instability problems associated with their force controllers. In this study, a new stability factor in force control will be pointed out. When a manipulator is constrained to an environment(force-controlled), geometric instability due to the relationship between the manipulator configuration and the force-controlled direction is shown to be a significant factor in overall system stability. This exploratory study points out a rather intuitive, geometrically based stability factor in terms of an effective system stiffness and analyzes the phenomenon both analytically and graphically. Also, a stiffness control algorithm using the kinematic redundancy of a kinematically redundant manipulator is proposed to improve the overall stability in force control.