• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.618-623
• /
• 2000

In order to increase the porductivity of electrical parts, manufacturing processes using progressive dies have been widely used in the industry. Motor cores have been fabricated using progressive stacking die with the lamination procedure for better electro-magnetic property. for the proper design of a process, a prediction of the process is required to obtain many design parameters. In this work, rigid-plastic finite element analysis is carried out in order to simulate the lamination this work, rigid-plastic finite element analysis is carried out in order to simulate the lamination process of the motor core. The effects of the embossing depth and the amount of deviation are investigated and compared with experiments. The forming process can then be predicted successfully from the results of analyses, which enables to design appropriately the die and the process.

• 소성∙가공
• /
• 제22권6호
• /
• pp.310-316
• /
• 2013

Recently, numerical predictions of surface deflection based on curvature analysis have been developed. In the current study, a measure of surface deflection is proposed as the maximum variation of curvature difference between the panel and the tool in order to account for surfaces that have high curvature. The current study focused on the assessment of accuracy for the surface deflection prediction with the consideration of planar anisotropy. As an example, a shallow rectangular drawn part with rectangular embossing was considered. In terms of the proposed surface deflection measure, the maximum variation of curvature difference, the prediction with a planar anisotropic model shows better correspondence with experiment than the one using a normal anisotropic model.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.64-71
• /
• 2008

Burr generated on plate holder should be removed through additional process, because it has an influence on the function of automotive seat recliner. The process layout to perform simultaneously embossing and half blanking of plate holder has been developed in this study in order to minimize the influence of burr formation. The optimal process condition to satisfy the required dimensional accuracy of plate holder has been determined using Taguchi method and finite element analysis. It has been shown from experimental results that the proposed method is decidedly superior to the previous FCF method from the aspect of sheared surface, roll-over, flatness and burr height.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.397-400
• /
• 2009

When the metal sheet is subjected to the housing surface for fitting and insulating from harsh surroundings like fluid ingression or hot steam, both strength and formability have to be equally considered. In this regard, the main aim of this study is to design an apparatus of cost-effectively producing flexible fluted band with increasing the formability of embossed stainless steel sheet, which is utilized as a thermal insulation metal for housing ship engine exhauster. Designed to fabricate a maximum sheet width of 700 mm, this new apparatus consists of upper roll made of hard urethane and the female-etched lower roll made of SKD11, have a producing capacity up to 1-meter homogeneously embossed sheet for just 60 seconds. This machine is devised for the maximum operating efficiency from original sheet handling to machine setting. The embossing properties are characterized by 3-D profiling. After embossing plain metal sheet, both yield strength and elongation properties are improved simultaneously, indicating the effectiveness of the newly designed apparatus.

• 프린팅코리아
• /
• 통권33호
• /
• pp.146-149
• /
• 2005

다이커팅은 주로 프레젠테이션 접지물, CD/DVD 자켓, 라벨, 플레잉카드, 기프트카드, 마그넷카드 등에 응용되고 있다. 전세계적으로 유명한 유력 다이커터 제조업체인 밥스트, 브라우세, 브랜드젠&클루지, 산와와 그 외 다른 업체들은 엠비오, 롤렘, 스필, 비죽과 같은 업체들이 중형범위 시장을 목표로 하는 동안에도 대형 범위 시장에 활용되는 인쇄기들에 관심을 보여왔다. H.S.보이드와 프린트크래프트는 인쇄업체들이 이미 보유하고 있는 오프셋 인쇄기에 인라인으로 다이커팅 장비를 부가할 수 있는 시스템들을 제공한다. 하이델베르크는 스피드마스터SM52 인쇄기에 인라인 다이커팅 장비를 선택사양으로 장착, 중형 범위 시장을 공략할 뿐만 아니라 다이매트릭스, 카마 등의 장비를 통해서는 하이-엔드 작업 범위까지 공략하고 있다. 다이커팅은 폴딩(접지), 펀칭(타공), 글루잉(풀칠), 스코어링(꺽음줄매기기), 퍼핑(연속천공), 금박, 엠보싱 작업들과 결합된다.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.45-52
• /
• 2001

In order to increase the productivity of electrical parts, manufacturing processes using progressive dies have been widely used in the industry. Motor cores have been fabricated using progressive stacking die with the lamination procedure for better electro-magnetic property. For the proper design off process, a prediction of the process is required to obtain many design parameters. In this work, rigid-plastic finite element analysis is carried out in order to simulate the lamination process of the motor core. The effects of the embossing depth, the amount of deviation, and the number of stacked sheets are investigated and compared with experiments. The forming process can then be predicted successfully from the results of analyses, which enables an appropriate design to be made for the die and the process.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.362-368
• /
• 2002

가. 인공광원은 색온도, 연색지수, 파장대, 조도등에서 태양에 가장 근접한 메탈할라이드 등을 선정했다. 나. 광원을 공시비닐하우스에 적용키 위해 반사갓 재료 및 각도, 등 간격별로 요인시험한 결과 엠보싱처리 알루미늄 재료, 반사갓 각도 전후좌우 30$^{\circ}$, 등간격 550mm에서 가장 좋은 것으로 나타나 비닐하우스용 고추건조장치의 장조사부 설계.제작에 적용하였다. 다. 건조성능시험결과 시험구(인공광+열풍)가 대비구(열풍)에 비해 건감속도가 10.3-19.7% 향상되었고, 건조에너지도 16.1~17.1% 절감되는 것으로 나타났다. 라. 시험구 및 대비구의 색택(ASTA color) 및 당도에 대해 F-test 검증결과 5% 유의수준에서 고도의 유의차가 있는 것으로 나타났으며 ASTA color값은 차이가 컸으나 당도에서는 차이가 없는 것으로 나타났다. 결론적으로, 농가에서 사용하고 있는 하우스 열풍건조에 비해 색택 및 성분면에서 양호하기 때문에 비닐하우스 건조방식을 채택하는 농가를 대상으로 인공광조사 건조방식을 추가한다면 전천후 건조방식으로 적용이 가능할 것으로 사료되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.826-829
• /
• 2004

Structural Dynamics Modification is very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material property, changing shape of structure. In this research, using the surface grooving technique, shape of base structure was changed to improve its first natural frequency. Utilizing the result of frequency variation analysis, groove shape was formed gathering the many small embossing elements. For this process, Criterion Factor was introduced. To reduce its amount of calculation, the range of target area was restricted to their neighboring area and initial grooving point was selected using high-strain energy. This surface grooving technique was successfully applied to the HDD cover model.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.103-103
• /
• 2009

태양전지 모듈의 효율 상승을 위한 한 가지 방법으로써 태양전지 모듈에 보호층으로 사용되는 고분자 플레이트 및 보호 유리층 등에 저반사 효과를 갖는 나노급 크기의 패턴을 형성 하였다. PVC, PMMA 등의 고분자 소재의 보호층은 hot-embossing의 방법을 사용하여 표면에 반사방지막을 형성하였으며, 양면 동시 엠보싱 방법을 사용하여 그 효율을 높이고자 하였다. 또한 저철분 유리판 위에 nano-imprinting 공정을 사용한 고분자 패턴을 형성함으로써 반사 방지효과를 얻고자 하였다. 또한, 형성된 패턴의 내구성을 측정함으로써 태양전지 모듈에의 적용 가능성을 확인 하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 2007

We have developed a compact and cost-effective camera module on the basis of wafer-scale replication technology. A multiple-layered structure of several aspheric lenses in a mobile camera module is first assembled by bonding multiple glass-wafers on which 2-dimensional replica arrays of identical aspheric lenses are UV-embossed, followed by dicing the stacked wafers and packaging them with image sensor chips. We have demonstrated a VGA camera module fabricated by the wafer-scale replication processing with various UV-curable polymers having refractive indices between 1.4 and 1.6, and with three different glass-wafers of which both surfaces are embossed as aspheric lenses having 200 um sag-height and aspheric-coefficients of lens polynomials up to tenth-order. We have found that precise compensation in material shrinkage of the polymer materials is one of the most technical challenges, in order to achieve a higher resolution in wafer-scaled lenses for mobile camera modules.