• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.18-25
• /
• 2008

A performance analysis program has been developed for the gas generator cycle liquid rocket engine. This program predicts the system performance with the performances of subsystems which are evaluated by the models based on another analyses or experiments. The analysis method has been validated by comparing the engine performance against the published conceptual design. The performance models of the subsystems have been verified to give reasonable results by comparing with the MC-1 engine design and the system analysis of 10 ton thrust engine. The system performance of the 30 ton thrust rocket engine using LOx/Jet-A1 has been presented as an application example.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.992-995
• /
• 2010

엔진 흡기시스템 중 흡기매니폴드는 가솔린엔진의 성능을 결정하는 매우 중요한 성능 인자이다. 본 연구에서는 1400cc급 가솔린 엔진용 흡기 매니폴드에 대한 유동해석과 리그 실험을 수행하였다. 압력차에 따른 유동 및 유량계수의 해석을 통하여 유동특성을 분석하였으며 실험적 평가를 통하여 공기유량계수의 결과치를 검증하였다. 해석과 실험 결과를 비교 분석하여, 해석값과 실험값의 오차를 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.27-27
• /
• 2000

소, 중형 상업용 항공기나 초등 훈련기용으로 많이 이용되고 있는 터보프롭엔진의 성능해석을 위한 프로그램을 개발하였다. 대상엔진으로는 국내 최초의 초등훈련기인 KT-1의 추진기관인 PT6A-62엔진을 선정하였고 프로그램의 검증을 위하여 지상정지조건에서의 성능, 고도에 따른 성능 및 비행마하수에 따른 성능, 그리고 고도와 비행마하수를 동시에 고려한 성능 등을 상용 프로그램인 GASTURB 및 제작사에서 제시한 성능데이터와 그 해석결과를 비교하였다. 개발된 프로그램을 이용하여 비행마하수 0.2, 100% 동력터빈 회전수에서 가스발생기 회전수를 75%에서 105%까지 5% 간격으로 나누어 부분부하 성능해석을 수행하였다. 또한 연료유량의 변화에 대한 천이상태 성능해석도 수행하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.58-66
• /
• 2019

In this study, the start-up characteristics of a staged combustion engine were analyzed numerically based on relational equation modeling of the entire engine components. The start-up characteristics were extensively analyzed considering the transient period of the total engine system from the start-up sequence till the steady-state of the engine. The performance characteristics of the engine components such as RPM of engine power-pack, chamber pressure and O/F ratio of pre-burner, and mass flow of propellants in the start-up period were investigated. Furthermore, the calculated engine data were compared satisfactorily with the experimental data. Through the comparison of data, successful validation of present engine start-up analysis has been obtained.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.12-12
• /
• 2000

국내에서 최초로 개발된 초등훈련기 KT-1의 추진기관인 터보프롭 엔진(PT6A-62)을 위한 정상상태 성능모사 및 진단 프로그램을 개발하였다. 개발된 정상상태 성능해석 프로그램의 검증을 위해 해석 결과를 엔진 제작사에서 제공한 성능 데이터 및 가스터빈 엔진의 성능모사 프로그램으로 잘 알려진 GASTURB와 비교하였다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.319-322
• /
• 2007

A numerical method for prediction of the Windmilling start performance of micro-turbojet engine has been developed. The method incorporates the available loss correlations and analyses for the estimation of the performance of the major engine components. It has been applied to the micro turbojet engine with the mixed type compressor. The starting performance characteristics on the on/off-design regions have been analysed. Additionally, the sensitivity of each design parameter which has an effect on Windmilling start performance has been analysed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.592-596
• /
• 2012

The details of engine data are essentially needed for engine modeling and simulation. But, the engine data are kept secret because the information is company's experiential property. In this paper performed the performance modeling of the mixed flow turbofan engine cycles from the general available engine data, and verify the validity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.578-585
• /
• 2012

Reciprocating engine is widely used for small propeller driven aircraft. because it is the superior efficiency and low price. Currently, reciprocating engine is used for the development of KC-100, LSA, PAV, UAV in domestic. In this study, Naturally aspirated engine and turbocharger engine performance model is developed. The propeller is designed and analyzed at cruise condition of reciprocating engine aircraft using optimum method, the propeller performance model is developed. The Integrated propulsion performance model is developed, through the matching with engine and propeller performance model, for small reciprocating engine aircraft performance analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.239-248
• /
• 2010

This paper dealt with the Performance Modeling of a low-bypass turbofan engine for supersonic aircraft. The Pratt and Whitney F100-PW-229 engine has been employed for low-bypass turbofan engine performance modeling. Generally, The complete commercially-classified information concerning the engine are unknown. So, Components' generic characteristics are described and assumptions made in order to model the F100-PW-229 engine performance model. All the analysis has been undertaken using published data taken from the open literature. The results of the Engine Performance using Gasturb11 showed that the Engine performance model was evaluated to be properly constructed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.64-71
• /
• 2018

It is essential to understand the characteristics of gas turbine components in order to carry out an off-design analysis of a gas turbine engine. In this study, a micro gas turbine engine test system was constructed to understand the performance characteristics of gas turbines. The temperature and pressure in the flow path of the micro gas turbine was collected by measuring the engine spool speed, and a compressor map was constructed by using the experimental data. The exhaust gas was collected at the turbine outlet and the combustion efficiency was calculated. An off-design performance analysis at ground static was performed using GasTurb software by applying the compressor map and combustion efficiency obtained from the experimental data. Futhermore, we compared and evaluated the analysis results with engine operating data.