• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.807-808
• /
• 2010

To insert payload to the orbit over the 200km-altitude using launch vehicle which has 300sec the Isp, multi staging technique for launch is necessary. The range between the sea-level to the transfer orbit about 200~250km is for operation of 1st and 2nd rocket engines and the higher altitude is for propulsion system of the acceleration block and satellite. The upper stage rocket engine should have the high technology for entering the payload into the orbit precisely more than the performance for high thrust level. With this investigation of the upper stage rocket engines which have been used, we want to understand their development trend and prospect which is going to be references for the development of ours.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.148.1-148.1
• /
• 2012

로켓 혹은 우주발사체의 주엔진에는 대부분 연료와 산화제를 연소시켜 나오는 에너지를 사용하는 화학로켓이 주종을 이루어 왔다. 이러한 로켓엔진에서 그동안 연료로는 수소계, 탄화수소계, 아민계 등 다양한 화학물질이 사용되어 왔으나, 산화제로는 강한 산화성을 나타내면서 밀도가 높은 몇몇 물질만이 제한적으로 사용되어져 왔으며, 최근에는 주로 액체산소(LOx)와 사산화질소(N2O4)가 사용되고 있다. 그러나 산화제 중 액체산소는 극저온이면서 상대적으로 밀도가 낮고, 사산화질소는 강한 독성을 지니고 있으며 액체로 존재하는 구간이 좁아 연구 목적의 소형발사체를 구현하는 것에는 많은 어려움이 있다. 이러한 이유로 최근 소형발사체 개발분야에서는 상온저장성이면서 친환경적인 과산화수소(H2O2)와 아산화질소(N2O)를 산화제로 활용하는 것에 대한 관심이 고조되고 있으나, 대형 추진기관을 개발하는 연구자들로부터는 액체산소를 사용할 때 보다 엔진 자체의 비추력이 상대적으로 낮다는 이유로 활용이 외면되어 온 것이 사실이다. 본 연구에서는 엔진 자체의 추진성능 보다는 사실상 발사체의 목적이라고 할 수 있는 추진단 속도증분을 성능의 지표로 삼아 평가하였으며, 결과를 통하여 과산화수소와 아산화질소의 높은 밀도가 엔진의 낮은 비추력을 충분히 보상할 수 있음을 보였다. 과산화수소와 아산화질소는 교육/연구용 소형발사체 구성에 충분히 활용가능한 산화제이며, 실제 발사에서 충분한 비행성능을 기대할 수 있는 물질로 평가할 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.454-456
• /
• 2012

Conceptual design results of a thrust chamber for a 7 tonf-class liquid rocket engine of KSLV-II 3rd stage were described. The engine system for KSLV-II 3rd stage is pump-fed system, the thrust chamber has vacuum thrust of 6.9 tonf, vacuum specific impulse of 336.9 sec, chamber pressure of 70 bar, nozzle expansion ratio of 94.5, total propellant mass flow rate of 20.5 kg/s, mixture ratio(O/F) of 2.45. The thrust chamber consists of mixing head with 90 coaxial swirl injectors and regeneratively combustion chamber cooled by kerosene.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.437-443
• /
• 2014

Engine is one of the most important parts in a rocket for completing its mission successfully. In this paper, we provide a methodology for estimating reliability and development cost of a liquid rocket engine newly developed. To estimate reliability, a baseline engine is selected considering factors whose effects on reliability are unquantifiable. Then reliability of a baseline engine is adjusted to reflect the effect of factors that can be modeled quantitatively. Using the previous Transcost engine cost expressed in terms of mass and the number of hot firing tests, the engine development cost is reexpressed in reliability and thrust requirements. Finally, a numerical example is given to illustrate the application of the methodology to a turbopump rocket engine using staged combustion cycle with LOX/LH2 propellant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.194-197
• /
• 2005

Pulse-mode performance evaluation is made for a set of monopropellant hydrazine thrusters producing $0.95 lb_{f}$ of nominal steady-state thrust at an inlet pressure of 350 psia. With a brief description on the hot-firing test matrix, a typical data obtained from pulse-mode firing is given directly showing the variational behavior of propellant supply pressure, vacuum condition, and thrust, in addition to the thermal response of the thruster. The performance features are successfully compared to the reference criteria of 1-lbf standard monopropellant rocket engine.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.95-102
• /
• 2006

The PPT being currently developed for the flight model represents a significant leap in techniques and technology compared to the previous flight ones. The electrical energy to be charged in the pulsed plasma thruster (PPT) is a very important aspect to provide an uniform impulse bit ,, and a specific impulse ,, for satellite attitude control. In this paper, we propose a nonlinear control technique and a stability analysis based on the Lyapunov function for the pulsed plasma thruster. Specifically, the proposed control law guarantees to charge and discharge the electrical energy generated from the power processing unit (PPU) within the specified time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.192.2-192.2
• /
• 2016

전기추력기는 화학식 추력기에 비해 비추력이 높아 인공위성의 자세제어, 궤도수정, 궤도천이를 포함한 행성 탐사활동 및 우주 임무수행을 위한 우주선의 엔진 등으로 다양하게 활용된다. 홀 추력기는 전기추력기 중 하나로 고리형 방전공간을 가진 고리형 추력기와 원통형 방전영역을 가진 원통형 추력기가 있으며, 원통형 추력기는 고리형에 비하여 넓은 방전공간으로 저전력 방전에 적합한 추력기이다. 또한, 저전력 추력기는 큐브셋(cubesat) 및 마이크로 위성(microsatellite)의 증가하는 수요에 따라 필요성이 증가하고 있으며, 활용도가 높아 다양하게 연구 및 개발되고 있다. 홀 추력기는 자기장과 전기장을 서로 수직되게 인가하여, 자화된 전자는 플라즈마 방전을 유지시키고 자화되지 않은 이온은 전기장 방향으로 가속되어 이온빔을 발생시킨다. 하지만, 저전력 소형 추력기는 작은 소모전력과 방전채널로 인한 성능 저하 및 자기장 구조 설계 등 많은 어려움들을 가지고 있다. 본 연구에서는, 약 50 W급의 소모전력을 바탕으로 영구자석을 이용한 저전력 플라즈마 추력기를 개발하였다. 방전 채널은 지름 15 mm, 길이 16 mm, 무게는 약 0.6 kg으로 원통형 구조의 채널로 제작되었으며, 약 1500-2000 G의 자기장 세기를 갖도록 설계하였다. 방전 기체는 제논을 사용하여 1-5 sccm영역에서 방전 특성을 살펴보았으며, 방전 전류는 0.02-0.4 A로 나타났다. 100-550 V영역에서 방전을 시도하였고, 채널길이를 16-24 mm 에서 약 1mN 급의 추력특성을 보였다. 본 발표에서, 홀 추력기의 제작 특성과 성능 및 플라즈마 특성에 대한 더 자세한 연구결과가 발표될 예정이다.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.134-140
• /
• 2007

Since the successful launch of Sputnik 1, a rocket engine was evolved rapidly. The first artificial satellite Sputnik has only 182 lb mass with a size of a basket ball, a modern artificial satellite is over 10 tons. As the size and the mass of an artificial satellite increases, the stronger launch vehicles are required. However, the story is different in the field of the rocket engine development. In the early to mid age of the space race, rocket engine study was focused on the stronger and bigger engine development, but from the 80's the tide has changed. A rocket engine must be strong and also economic. This trend was accelerated from when a rocket launch was used commercially. In this study, a capability of the launch vehicle and engine was investigated to provide a reference for a liquid rocket engine development plan.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.10-18
• /
• 2010

Scramjet engine is one of the core parts of hypersonic vehicle of next generation and being investigated by many countries. Korea Aerospace Research Institute performed a ground test of the model scramjet engine S1 in 2007. And, S2 model which is improved from S1 model in engine startability and thrust was tested with HIEST (High Enthalpy Shock Tunnel) at Kakuda Space Center of JAXA. Design condition of S2 model was Mach 6.7, however, it was tested at Mach 7.7 as an off-design condition test. As a test result, flow separation was found at the inside of the intake, but the engine showed stable combustion pressure distribution. Furthermore, compared to other test models, S2 model showed a good performance value in thrust and specific impulse.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.122-129
• /
• 2004

An accurate thrust measurement is one of the critical paths to the successful test and evaluation program of small liquid propulsion engines. This study describes the design factors for the development of thrust measurement system (TMS) as well as manufacturing practice of TMS hardware. We investigate characteristics of the TMS and its performance through hot-firing test of small liquid engine in a vacuum test cell which is capable of simulating 100,000 ft of altitude or higher. For performance test of TMS, we measure thrusts by changing propellant injection pressure at steady state firing mode as well as at pulse firing mode. Measured eigen frequency of the TMS is 67 Hz. Linearity test of the TMS shows good performance with less than 0.5% of linearity error.