• Clean Technology
• /
• v.18 no.3
• /
• pp.325-328
• /
• 2012

The condensation reaction of 9,9'-bis(4-hydroxyphenyl)fluorene with epichlorohydrin to prepare 9,9'-bis[4(glycidyloxy) phenyl]fluorene (2), an important building block for fluorene-containing epoxy polymers, has been studied. The reaction is found to be quite sensitive to several experimental conditions such as reaction temperature and time, added amount of epichlorohydrin, the presence of catalysts and the use of co-solvent. Several conditions for obtaining the best yield in the reaction are: the reaction temperature is below 373 K and the reaction time is shorter than 1.5 h, and the ammonium salts act as a catalyst. Also, the use of ternary solvent (toluene, DMSO, water) has been proved to be crucial to maintain the reaction temperature and for an easy purification. Thus, the reaction proceeds in an environment-friendly manner where the use of reactants and the production of chemical wastes is minimized.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.4
• /
• pp.396-403
• /
• 2016

Objectives: The study is to evaluate biological monitoring and risk assessment for epichlorohydrin-bisphenol A resin exposed from waterproofing or finishing work in the apartment building construction. Methods: Subjected workers were working on spray-painting and waterproofing work for 8 hours per day every 20 days. The urine samples were collected at the end of 20 days working period. For urinary bisphenol A as metabolite from epichlorohydrin-bisphenol A exposure, urine samples were analyzed with liquid chromatography mass-mass spectrometry(HPLC-MS/MS). Results: Geometric means of urinary bisphenol A(BPA) with no hydrolysis and with enzymic hydrolysis(BPA-EH) in the workers were $1.10{\mu}g/L$ and $2.90{\mu}g/L$. BPA-EH was 4 times higher than that of control group. The factors for working period and ages did not affect the variation of BPA and BPA-EH. The levels for BPA and BPA-EH were not higher than 95th percentile for exposure on human-life environment. Conclusions: The BPA and BPA-EH were therefore effective biological markers for epichlorohydrin-bisphenol A exposure workers, but not seem to hazardous exposure level. Waterproofing work in construction workshop is required to measuring work environment and health care management for the workers.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.676-681
• /
• 2014

Licorice, widely used as a herbal medicine, has flavonoids such as liquiritin and its aglycone, liquiritigenin that show anti-oxidant and anti-inflammatory properties. Licorice flavonoid-loaded cellulose hydrogels were prepared as carriers for skin drug delivery, and their properties were investigated. The porous cellulose hydrogel was made by reacting cellulose with epichlorohydrin as a cross-linking agent in NaOH/urea(1~10%) solutions. Through studies on the rheological properties and water uptake of the hydrogel, a NaOH/urea(6%) solution was established as being optimum for the synthesis of the cellulose hydrogel containing liquiritin and liquiritigenin. Scanning electron microscopy (SEM) observations of a cross-section of the prepared hydrogel indicated its porosity. In particular, in skin permeation experiments using a Franz diffusion cell, hydrogel containing the licorice flavonoids showed remarkable transdermal permeation compared to the control group. These results indicate that porous cellulose hydrogel is a potential drug delivery system to enhance the skin permeation of licorice flavonoids.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.358-365
• /
• 2000

Miscibility itnd thermal behavior of blends of synthetic biodegradable aliphatic polyester (Bionolle) with poly(epichlorohydrin) (PECH) were investigated by a differential scanning calorimetry (DSC), a dynamic mechanical thermal analyzer (DMTA) and a rotational rheometer. Observed both single glass transition temperatures from the DSC in agreement with the Fox equation and single T$_{g}$ changes as a function of composition from the DMTA indicate that these blend mixtures are miscible. In addition, the miscibility of this blend system was also observed from the single curve of the Cole-Cole Plot of log G′($\omega$) vs. log C"($\omega$) from the dynamic test using a rotational rheometer. This was further verified from the cryogenically fractured surface of BDP/PECH blends by scanning electron microscopy.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.291-299
• /
• 2008

Bisphenol A diglycidyl ether(BADGE)는 비스페놀 A와 에피클로로하이드린의 축합에 의해 만들어지는 물질로 상업용 액상 에폭시 수지의 주성분이다. 본 연구는 clusterin mRNA 발현이 BADGE의 노출된 생식기계 독성에 연관되어 있는지를 연구하기 위해 수행하였다. BADGE는 SPF Sprague-Dawley 임신 랏트에 임신 6일부터 수유기가지 하루에 한 번 0(대조군)과 375mg/kg/day를 경구 투여하였다. 수컷 새끼는 일반 사항과 몸무게, 일반 발달 지표(예, 항문과 생식기 사이의 거리, 이개개전, 절치붕출, 유두잔류, 안검개열, 고환하강, 포피박리 등)등을 관찰하였다. 대조군과 투여군에서 다섯 마리의 수컷 새끼는 출생 후 3, 6와 9주에 부검하여 부고환의 조직학적 변화 등을 관찰하였다. BADGE 375 mg/kg/day 투여군에서 항문과 생식기 사이의 거리는 대조군보다 길어지는 경향을 보였다. 출생 후 6주와 9주에서 부고환의 상대 무게는 대조군보다 약간 증가하였으나 조직학적인 변화는 관찰되지 않았다. BADGE 투여 군에서 clusterin mRNA 발현량은 대조군에 비해 3주에 56%, 6주에 57% 그리고 9주에 86% 감소하였다. 이런 결과는 랏트의 부고환에서 clusterin은 BADGE에 반응하는 유전자 중 하나일 수 있다는 가능성을 나타낸다.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.41-49
• /
• 2010

Furan-containing epoxide monomers (8, 9) were designed and synthesized as carbon-neutral, environment-friendly adhesion material. Bicyclic skeleton were constructed using the Diels-Alder reaction of furan and methyl acrylate, both readily accessible starting material from a biomass via bio-refinery process. After reduction of ester functionality, resulting hydroxyl moieties were coupled to epichlorohydrin to provide the epoxy-functionalized furanic monomers (8, 9). The structure of new furanic monomers was confirmed by $^1H$ and $^{13}C$ NMR spectroscopy. As UV-curable monomers, basic properties such as UV curing time and the extent of UV curing were evaluated by photo DSC. Photo-curing shrinkages were measured by linear variable differential transformer transducer (LVDT) and the effect of molecular structure on shrinkage was considered. In addition, new synthetic compounds showed the shear strength over 3 MPa when they were photo-cured between polycarbonate plates, which indicates these compounds are feasible to use as photo-curable adhesive materials.