• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.81-83
• /
• 2000

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.548-552
• /
• 2011

Two functionalization methods, i.e., acid treatment and chemical amidation were performed to prepare the functionalized multi-walled carbon nanotubes (MWCNT), and the properties of epoxy/functionalized MWCNT composites were investigated and compared. Fourier transform infrared spectroscopy (FTIR) was used to confirm the surface functionality of the MWCNT obtained by the functionalization methods. The effects of the MWCNT functionalization on the interface and thermal conductivity were studied by zeta potential analyzer, scanning electron microscope and thermal conductivity analyzer. From these results, it was confirmed that the thermal conductivity of the epoxy/MWCNT composites could be increased by grafting with dodecylamine. This could be interpreted by relatively strong dispersion forces of the grafting MWCNT with dodecylamine in DGEBF epoxy resin. These results were in good agreement with the results that the zeta potential value of the grafting MWCNT with dodecylamine has a higher negative value than that of MWCNT with acid treatment.

• Journal of Food Hygiene and Safety
• /
• v.16 no.2
• /
• pp.145-151
• /
• 2001

EpoxidiBed soy bean oil (ESBO) is a plasticizer of PVC which is being widely used as a gaskets for the lid of glass jars including baby food. Using reverse mutation assay, chromosome aberration test and micronucleus test, ESBO were evaluated the mutagenicity. In the reverse mutation test, ESBO did not induced mutagenicity in Salmonella typhimurium TA98, TA100, TA1535, TA1537, TA102 with and without metabolic activation. In the chromosome aberration test using CHL cells, the results showed no increased structural and numerical aberrations in the concentration of sample producing cytotoxicity with and without metabolic activation. The in vivo induction of micronuclei was measured in polychromatic erythrocytes of bone marrow of young (3weeks old) and adult (6 weeks old) ddY mice of both sex. At 24 hours after treatment with ESBO 20, 10, 5, 2.5 g/B.W. kg/corn oil 10 ml by oral route animals were sacrificed and bone marrow cells were prepared for smear slides. The results showed no increased micronucleated polychromatic erythrocytes regardless of sex and age. It was concluded that water soluble ESBO did not show certain genotoxicity within our studies conducted.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.649-656
• /
• 1992

The synthesis of epichlorohydrin was carried out by the epoxidation of allyl chloride with tert-butyl hydroperoxide(TBHP) over silica supported molybdenum catalyst. Kinetic study was performed at $60-80^{\circ}C$ and 10 atm with the molar ratio of TBHP/Allyl chloride between 0.01 and 0.1 in a batch reactor. The epoxidation of allyl chloride was inhibited by tert-butyl alcohol and kinetic data could be represented by Michaelis-Meten type rate equation. The reaction mechanism could be explained by the combination of reversible adsorption of TBHP and tert-butyl alcohol accompanied by reaction of allyl chloride with TBHP adsorbed on $Mo/SiO_2$ catalyst.

• Journal of Adhesion and Interface
• /
• v.16 no.3
• /
• pp.101-107
• /
• 2015

Epoxy resin toughening agents such as core/shell nanoparticles, CTBN epoxy, polyester polyols, and polyurethane have been widely used in order to compensate for the brittleness and improve the impact resistance of the epoxy resin. In this work, a few tougheners mentioned above were individually added into adhesive compositions to observe the effects of physical and mechanical properties. Both flexural strength and flexural modulus were measured with UTM while impact strength was analyzed with Izod impact tester. The obtained results showed that the addition of toughening agents afforded positive performance in terms of flexibility and impact resistance of the cured epoxy resin. Furthermore, DMA experiments suggested that the trends of storage modulus data of each epoxy resin composition coincided with the trends of flexural modulus data. FE-SEM images showed that toughening agents formed circled-shape particles when it was cured in epoxy resin composition at high temperature by phase separation. The existence of particles in the cured samples explains why epoxy resin with toughener has higher impact resistance.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.31-37
• /
• 2008

The effect of MMT on mechanical properties of CTBN toughened epoxy nanocomposite is studied. In case of CTBN toughened epoxy nanocomposite with modified MMT, it is found that the enhancement of toughness and tensile properties are exhibited in CTBN toughened epoxy nanocomposite with modified MMT From the results of fractured surface morphology of sample, it is clearly shown that the improved mechanical properties can be obtained in CTBN toughened nanocomposite due to the significant energy dissipation mechanism by MMT loading.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.266-271
• /
• 2011

Single-walled carbon nanotube (SWCNT)/Epoxy composites were prepared for improving thermal conductivities and dispersion of SWCNTs in the epoxy matrix. Composites obtained different types of SWCNTs which are pristine and functionalized of the SWCNTs by acid and amine treatments. Three types of SWCNTs were dispersed in diglycidyl ether of bisphenol A (DGEBA) and bisphenol F (DGEBF). Enhanced interaction between functional groups on SWCNT and epoxy resins was evidenced by an improvement in the dispersion of the SWCNTs in the epoxy matrix. Thermal conductivity of composites containing acid SWCNTs were found to be much better than those containing pristine and amine treated SWCNTs.

• Prospectives of Industrial Chemistry
• /
• v.24 no.2
• /
• pp.31-37
• /
• 2021

일반적으로 cross-link된 열경화성 에폭시수지는 유기용매에 용해되지 않고 열에 용융되지 않는 특성이 있다. 따라서 에폭시수지가 사용된 물질, 특히 탄소섬유강화플라스틱(carbon fiber reinforced plastic, CFRP)은 재활용이 어렵고, 사용 후 폐기물 처리에 막대한 비용이 소비되고 있다. 본 원고는 열경화성 에폭시수지 응용물 중 CFRP의 재활용을 중심으로 한 친환경적 재활용 기술에 관하여 정리하였다. 특히, CFRP의 구성요소인 탄소섬유(CF)와 기지재인 에폭시수지를 모두 재활용 할 수 있는 화학적 방법에 관하여 보고한다. 더 나아가 열경화성 에폭시수지의 화학적 분해물의 재이용기술에 관한 예를 소개한다.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.594-602
• /
• 2010

Since the requirement of the high density integration and thin package technique of semiconductor have been increasing, the main package type of semiconductor will be a chip scale package (CSP). The changes of diffusion coefficient and moisture content ratio of epoxy resin systems according to the change of liquid type epoxy resin and fillers for CSP applications were investigated. The epoxy resins used in this study are RE-304S, RE310S, and HP-4032D, and Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The micro-sized and nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these epoxy molding compound (EMC) according to the change of filler size. The temperature of glass transition (Tg) of these EMC was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these EMC according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these EMC were calculated in terms of modified Crank equation based on Ficks' law. An increase of diffusion coefficient and maximum moisture absorption ratio with Tg in these systems without filler can be observed, which are attributed to the increase of free volume with Tg. In the EMC with filler, the changes of Tg and maximum moisture absorption ratio with the filler content can be hardly observed, however, the diffusion coefficients of these systems with filler content show the outstanding changes according to the filler size. The diffusion via free volume is dominant in the EMC with micro-sized filler; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the EMC with nano-sized filler.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.95-99
• /
• 2000

본 연구는 전자라이터용 에폭시 정량공급장치의 개발에 관한 것으로써 기존의 수작업에 의한 생산을 자동화함으로 하여 품질의 균일화를 도모하고 또한 납기준수를 위한 생산성향상에 기반을 둔 개발로서 전자라이터의 핵심 부품이라고 할 수 있는 Piezo igniter 절연부에 에폭시를 정량으로 주입할 수 있게 함으로서 품질 및 생산목표를 달성하고 기업의 이윤을 극대화하는데 초점을 맞추었다.