• Title/Summary/Keyword: 에틸렌 함량

Search Result 205, Processing Time 0.023 seconds

Effects of Salicylic Acid and 1-Methylcyclopropene on Physiological Disorders and Berry Quality in 'Campbell Early' Table Grapes (Salicylic acid 및 1-MCP 처리가 '캠벨얼리' 포도의 생리장해 및 품질에 미치는 영향)

  • Kim, Sung-Joo;Noh, Soo-In;Choi, Cheol;Lim, Byung-Sun;Ahn, Young-Jik;Chun, Jong-Pil
    • Journal of Bio-Environment Control
    • /
    • v.28 no.3
    • /
    • pp.218-224
    • /
    • 2019
  • This study was conducted to compare the effect of salicylic acid (SA), an ethylene biosynthesis inhibitor, and the 1-methylcyclopropene (1-MCP) fumigation, to prevent fruit quality deterioration and physiological disorders during the shelf-life of Korea's leading export grape variety 'Campbell Early'. The berries treated with SA after 1-MCP fumigation (1-MCP+SA) showed a higher firmness value and titratable acidity than single treatment of SA or 1-MCP. The rate of shattered berry was high as 41.7% for 100ppm ethephon spray, 40.8% for $25{\mu}M$ SA, and 38.2% for 1,000ppb 1-MCP, but showing only 18.7% when the SA was applied after 1-MCP fumigation. The ratio of short brushes less than 1mm was largest at 74.3% for ethephon treatment, while 1-MCP+SA treatment was found to have the longest brush length among all treatments, with a 2-4mm ratio of 22.8% and a 4-6mm ratio of 27.9%. The weight of rachis was found to be the lowest at 2.3g in the ethephon treatment, and the reduction of rachis weight loss per cluster by 1-MCP+SA treatment was evident. In addition, 1-MCP+SA treatment were effective in mitigating stem browning and berry decay during the 16-day storage period at $19^{\circ}C$ in this cultivar, so it is believed that they can be used as a practical post-harvest treatment in grape exportation.

Effects of Shelf Temperature on the Quality of Red Pepper (Capsicum annuum L.) after Low Temperature Storage (홍고추의 저온저장 후 모의 유통온도가 품질에 미치는 영향)

  • Park, Sung Min;Kang, Won Hee;Lee, Yun Soo;Kim, Il Seop;Jeong, Cheon Soon
    • Horticultural Science & Technology
    • /
    • v.19 no.4
    • /
    • pp.526-529
    • /
    • 2001
  • The study was conducted to investigate quality changes of red pepper by different shelf temperatures after storage at $7^{\circ}C$ for 30 days. Red pepper fruits produced high volume of $C_2H_4$ and $CO_2$ when alternating temperatures exceeded $10^{\circ}C$. Total sugar contents were not different among all the treatments. In contrast, sucrose content decreased about half at higher shelf temperature conditions than at $7^{\circ}C$. Capsaicinoid content was not influenced by alternating temperature, but ascorbic acid content tended to decrease by high shelf temperature after storage at $7^{\circ}C$. Decay did not occur under $13^{\circ}C$, while it occurred in 22.2% of hits at $15^{\circ}C$ and 68.8% at room temperature, respectively. From this results, it is suggested that the optimum shelf temperature of red pepper after low temperature storage should be under $13^{\circ}C$ and that fruits of red pepper stored at $7^{\circ}C$ for 30 days could be sold within 10 days on the shelf.

  • PDF

Blend Films of Poly(acrylic acid-co-maleic acid) with Poly(vinyl alcohol) (I) : Thermo-mechanical Properties and Gas Permeability (폴리(비닐 알코올)과 폴리(아크릴산-말레산) 공중합체의 블렌드 필름 (I) : 열적-기계적 성질 및 가스 투과도)

  • Ham Shin-Kyun;Jung Min-Hye;Chang Jin-Hae
    • Polymer(Korea)
    • /
    • v.30 no.4
    • /
    • pp.298-304
    • /
    • 2006
  • Blends of poly (acrylic acid-co-maleic acid)(PAM) with poly (vinyl alcohol)(PVA) were obtained by solution blending. The blends were solvent-on to a film to examine thermo-mechanical properties and gas permeability. The transition temperatures $(T_g\;and\;T_m)$ of the blends remained constant regardless of PAM contents. However, the values of enthalpy changes corresponding to melting transition $({\Delta}H_m)$ and initial degradation temperature $({T_D}^i)$ were decreased with increasing PAM content. The values of ultimate strength and initial modulus gave the maximum value at the 12 wt% PAM then decreased with further increase of PAM content up to 15 wt%. To measure the gas permeability of the PVA/PAM blend films, the PVA blend solutions were coated onto both biaxially oriented propylene (BOPP) and poly (ethylene terephthalate)(PET) films. The oxygen transmission rate $(O_2\;TR)$ permeability values mono- tonically decreased with increasing PAM content. However, moisture vapor transmission rate was not affected by PAM content.

Oxygen Permeation Characteristics of Nano-silica Hybrid Thin Films (나노 실리카 하이브리드 박막의 산소 투과 특성)

  • Kim, Seong-Woo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.24 no.2
    • /
    • pp.174-181
    • /
    • 2007
  • In this study, $SiO_2/poly(ethylene-co-vinyl$ alcohol)(EVOH) hybrid coating materials with gas barrier property could be produced using sol-gel method. The biaxially oriented polypropylene (BOPP) substrate with surface pretreatment was coated with the prepared hybrid sols containing various inorganic silicate component by a spin coating method. Crystallization behavior of the hybrids was investigated in terms of analysis of X-ray diffraction and cooling thermogram from DSC experiment. From the morphological observation of the $SiO_2/EVOH$ hybrid gel, it was confirmed that there existed an optimum content of inorganic silicate precursor, Tetraethylorthosilicate (TEOS), to produce hybrid materials with dense microstructure, exhibiting uniformly dispersed silica particles with average size below 100 nm. When TEOS was added at below or above the optimum content, particle clusters with large domain were observed, resulting in phase separation. This morphological result was found to be in good agreement with that of oxygen permeability of the hybrid coated films. In the case of film coated with hybrid prepared from addition of 0.01 - 0.02mol of TEOS, a remarkable improvement in barrier property could be obtained, however, with the addition of TEOS more than 0.04 mol, the barrier property was dramatically reduced because of phase separation and micro-crack formation on the film surface.

새송이버섯의 절임전처리 조건에 따른 품질 변화 특성

  • 황성희;이예경;윤광섭;김순동
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.04a
    • /
    • pp.117.1-117
    • /
    • 2003
  • 새송이 버섯은 맛과 향이 좋고 영양적으로 우수하여 성인병 예방과 개선 효과가 있다고 알려져 있으나 재배농가의 급증으로 인한 가격하락과 집중출하로 신선도의 하락 등이 문제가 되고 있어 새송이 버섯의 활용성을 향상시키고, 소비자의 기호를 충족시킬 수 있는 버섯류 가공품 개발이 요구되고 있다. 전통절임식품을 응용한 새로운 버섯류 장류절임 가공법을 개발하기 위하여 절임 전 처리에 따른 품질특성을 비교하였으며, 이를 위하여 먼저 절임 전처리 조건으로 블랜칭처리, 적정 염농도와 처리시간 및 탈염법을 개발하고 건조 등의 전처리에 따른 품질 평가는 수분함량, 염도, 색상, 조직감, 관능특성 등을 평가하였다. 새송이 버섯을 전처리하기 위한 블랜칭 처리조건은 7$0^{\circ}C$에서 10분간 처리한 구가 조직감이 우수하고 갈변이 적었으며 염 침지시간은 침지 72시간까지는 증가하였으나 그 이후로는 증가하지 않았고 4$0^{\circ}C$에서 탈염하는 것이 가장 우수하여 전처리 조건으로 선정하였다. 전처리 방법에 따른 중량변화는 블랜칭 처리가 약 10% 정도 중량이 더 많았으며 이 영향은 건조 후에도 지속되었다. 수분함량도 블랜칭 처리가 높았으며 염도 또한 건조 처리에 따라 높은 함량을 보였으나 블랜칭 처리를 병행했을 경우 낮은 값을 나타내었다. 조직의 강도는 무처리에 비하여 전처리를 함에 따라 많은 힘이 소요되어 질긴 조직 특성을 나타냄을 알 수 있다. 관능평가 결과 블랜칭 처리를 단독으로 실시한 B(B)처리구가 관능적 특성치 모두 높은 값을 보여 전처리 방법으로는 가장 우수한 전처리 방법임을 알 수 있었다.저온 장시간 처리한 경우에 비하여 낮은 수준이지만 약간의 증감 경향을 보이다가 고른 평형 상태를 유지하였다. 산소 농도는 저온 장시간 처리 직후 급격히 저하된 후 다시 증가하였으며 저장 7일 후에는 4$0^{\circ}C$ 3시간 처리구를 제외하고는 평형 상태를 유지하였다. 고온 단시간 처리구의 경우 처리 직후부터 저장 7일 후까지 고른 평형 상태를 유지하였다. 에틸렌의 경우 저온 장시간 처리구는 처리 직후 그 농도가 급격히 상승하였다가 저장 1일 후부터 대조구보다 낮은 값을 나타내었다. 고온 단시간 처리구의 경우 저온 장시간 처리구와는 달리 저장 1일 후부터 그 농도가 다소 상승되었다가 다시 감소는 경향을 보였다. 한편 열처리하여 냉각시킨 직후 및 저장1주 후 사과의 pH, 산도, 당도, 경도, 과육의 갈변도 등을 조사하였던 바 대조구 및 처리구간에 일부 항목에 있어서는 약간의 차이를 나타내었다. 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻

  • PDF

A Study of Mineral Quantification on Clay-Rich Rocks (점토질 암석의 광물정량 분석법 연구)

  • Byeong-Kook, Son;Gi-O, An
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.35 no.4
    • /
    • pp.431-445
    • /
    • 2022
  • A quantitative phase analysis method of X-ray powder diffraction was studied to determine the mineral content of clay-rich rocks practically as well as effectively. For quantitative X-ray powder diffraction analysis of the clay-rich rocks, it is necessary to prepare whole-rock powder samples with a random orientation by side mounting method. In addition, for the identification of the clay minerals in the rock, it is required to prepare an oriented mount specimen with a clay particle size of 2 ㎛ or less, ethylene glycol treatment, and heat treatment. RIR (reference intensity ratio) and Rietveld method were used for the quantitative analysis of the clay-rich rocks. It was possible to obtain the total clay and the non-clay minerals contents from the whole-rock X-ray diffraction profiles using the RIR values. In addition, it was possible to calculate the relative content of each clay mineral from the oriented X-ray diffraction profiles of the clay particle size and assign it to the total clay. In the Rietveld method of whole-rock X-ray diffraction, effective quantitative values were obtained from the Rietveld diffraction patterns excluded the region of less than 10 degrees (2θ). Similar quantitative values were shown in not only the RIR but the Rietveld methods. Therefore, the analysis results indicate a possibility of a routine quantitative analysis of clay-rich rocks in the laboratory. However, quantitative analysis of clay minerals is still a challenge because there are numerous varieties of clay minerals with different chemical and structural characteristics.

Effects of Formic Acid on the Quality of Rye Silage at Different Dry Matter Levels (개미산의 첨가가 건물함량이 다른 호밀 사일리지의 품질에 미치는 영향)

  • 신정남;배동호
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.6 no.1
    • /
    • pp.6-13
    • /
    • 1986
  • Experiments were conducted to study the effects of formic acid on the quality of the rye silages at the different dry matter content (19.2, 28.6 and 32.2%) and different formic acid addition levels (0.00, 0.24, 0.48 and 0.71%). Rye were taken at vegetative stage (plant height 40cm) on November 29, 1984. Herbage were adjusted dry matter contents by wilting. Materials were ensiled in small polyethelene film bag after addition planned formic acid, and stored under room temperature. The results obtained are as follows: 1. In the visual observation of silage quality by addition of formic acid in unwilted silage show more clear brownish-yellow color and sweet flavor and less acidity compared with untreated formic acid. 2. The pH values of the silage increased by increasing DM content. At lower dry matter contents in materials the pH values decreased with increased formic acid levels. At higher dry matter content silage, however, non significant difference were observed. 3. The formation of total organic acid decreased by increasing DM content in the materials, and there appeared a significant difference (P<01) among formic acid levels. The organic acid contents in silage decreased with higher formic acid levels. 4. The water soluble carbohydrate in silage increased by increasing DM content. And it was also increased (P<01) with increased formic acid addition level. 5. The production of NH_3 - N decreased (P<01) with increasing the addition of formic acid, and decreased by increasing DM content in materials. 6. The in vitro dry matter digestibility of silages showed not difference among dry matter contents of the materials but at 0.71% addition of formic acid in unwilted silages appeared higher (P<05) digestibility compared the others (0.00% and 0.24%).

  • PDF

Effect of High $CO_2$ Pre-treatment on Quality of 'Hikawa Hakuho' Peach Fruits (고 이산화탄소 전처리가 '일천백봉' 복숭아의 품질 변화에 미치는 영향)

  • Choi Jeong-Hee;Lim Jeong-Ho;Jeong Moon-Cheol;Kim Dong-man
    • Food Science and Preservation
    • /
    • v.12 no.6
    • /
    • pp.540-545
    • /
    • 2005
  • This study was conducted to evaluate the efficacy of high a)z pre-treatment (60, $100\%$ for 3, 6, 12 hr) on quality of 'Hikawa Hakuho' peach fruits. High a)z treatment inhibited the respiration and ethylene production, especially with long tenn treatment for more than 6 hr. Discoloration of peel, softening and decay were reduced by high $CO_2$ treatment $CO_2$ concentration of $60\~100\%$ did not affect soluble solids content and titratable acidity of fruits. $CO_2$ treated fruits, however, showed higher sweetness score compared with control. As the $CO_2$ concentration and treatment duration increased from 60 to $100\%$ and from 3 to 12 hr, respectively, the efficacy on quality increased. Fruits treated with $100\%\;CO_2$ for 3 hr and $60\%\;CO_2$ for 12 hr, however, showed very low flavor score due to the residual $CO_2$ in flesh. High $CO_2$ injury was not noted at any $CO_2$ levels tested in this study. Above results suggest that $60\%\;CO_2$ treatment for 6 hr resulted in as good control of respiration, ethylene production, decay, discoloration and softening without off-order.

Physicochemical Characteristics and Efficacy of Controlled-release Insecticide Formulation (방출조절형(放出調節型) 살충성(殺蟲性) 농약제제(農藥製劑)의 특성(特性)과 약효(藥效)에 관한 연구(硏究))

  • Kim, Jin-Hwa;Oh, Byung-Youl;Oh, Kyeong-Seok;Kim, Sung-Kee;Kim, Mee-Hea;Kim, Young-Koo
    • Korean Journal of Environmental Agriculture
    • /
    • v.14 no.3
    • /
    • pp.289-295
    • /
    • 1995
  • This study was carried out to develop a controlled-release insecticide formulation for the control of rose aphid (Macrosiphum ibarae) in rose and cotton aphid (Myzus persicae) in chrysanthemum (Dendranthema grandiflorum var. Meibung) in greenhouse. Imidacloprid[1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine] was chosen as a toxicant. Two synthetic polymers, low density polyethylene(LDPE) and ethylene vinyl acetate(EVA), were used as polymer matrices. The tested plastic sheet formulations were prepared by heat-aided extrusion procedures after mixing imidacloprid technical and the polymers of three different combinations, and physicochemical properties as well as efficacy of the formulations were investigated. The amounts of imidacloprid recovered and incorporated in the formulations were recorded over 90% and 80%, respectively. Release of the active ingredient from the formulations was remarkably affected by mixing rates of polymers. The active ingredient in the formulations was chemically unstable with over 10% degradation rates after 90 day storage at $50{\pm}2^{\circ}C$. The residual amounts of imidacloprid in the soil treated with the formulations were paralleled with the release pattern of the formulations. Efficacy of the formulations on rose and cotton aphid was maintained over 90% even 120days after treatment under greenhouse.

  • PDF

Effect of Chemical and Anti-fogging Agent Treated MA Packaging Film on Freshness Extension of 'Fuji' Apples (산, 염기 처리된 제올라이트와 결로 방지제를 함유한 기능성 MA포장재가 '후지' 사과의 선도유지에 미치는 영향)

  • Park, Hyung-Woo;Ryu, Na-Hee
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.19 no.2
    • /
    • pp.87-94
    • /
    • 2013
  • To investigate the effects of functional MA films (FMA) masterbatched by zeolite powder treated with 1 N HCl, 0.5 N NaCl solution and anti-fogging agent (NA) compared with control on the freshness extension of 'Fuji' apples during storage at $15^{\circ}C$. Preference, weight loss, total ascorbic acid, sugar content, acidity, change of gas composition in package were measured. After 150 days of storage, the weight loss of control (L) apples was 1%, that of apple in FMA film (NA) was 1.5% after 150 days. Total ascorbic acid content of apples in control (L) after 150 days was 2.09 mg%, those of apple in FMA film (NA) was 2.72 mg%. The titratable acidity of apple in FMA film was higher than that in control, while soluble solids content of apples in FMA film was lower than that in control after 150 days. Ethylene gas adsorbability in control was 192.2 ppm and those in FMA film was 141.4 ppm after 150 days. Overall, apples in FMA film was better than that of control. It was verified that apples packed with LLDPE film (control) lasted about 130days, while those with FMA films lasted about 170 days. Also, FMA films treated with anti-fogging agent few different compare to nontreated film, but commerdity on the display in market was considered higher than that of non-treated anti-fogging agent.

  • PDF