• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.23-33
• /
• 1993

저밀도폴리에틸렌과 나일론6의 블렌드가 용융압출기의 사용에 의해 제조되었다. 제 조된 비상용 블랜드의 유변학적, 형태학적 분석을 통하여 이들사이의 상관관계를 조사하였 다. 전단속도, 계면장력, 용융점도, 분산상의 농도들에 대한 분산상의 크기의 의존성을 평가 하였다. 한편 신장유동에 의한 모폴로지 변화를 조사하기 위하여 기제조된 블렌드를 사용하 여 용융방사를 하였다. 이러한 방식실험으로부터 본연구에 사용된 저밀도 폴리에틸렌과 나 일론6는 분산상과 연속상의 신장점도의 상대적 크기에 무관하게 피브릴화가 되어 방사 연신 비의 증가에 의해 매우 가는 분산된 피브릴을 얻을수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.383-390
• /
• 1993

This experiment was carried out in the green house at Tokyo University of Agriculture in 1992 to investigate the relationship between lodging resistances and specific morphological characters and to examine the effects of nitrogen top-dressing and growth retardant on changes of the endogenous ethylene content in rice plant. Inabenfide did not affect significantly yield, yield component, chlorophyll content, and $CO_2 assimilation but, decreasing plant height when growth regulators were applied at booting stage, decreasing internode elongation, and increasing culm thickness and diameter of the third and fourth internode. While, nitrogen top-dressing usually showed to effect increasing vegetative growth such as plant height, tiller number, and morphological characteristics but, were not significantly affected the chlorophyll content and $CO_2 assimilation. Ethylene evolution was dramatically changed with nitrogen top-dressing and growth retardant. Application of Inabenfide at 15 days before heading inhibited ethylene evolution in the all nitrogen levels. Higher nitrogen top-dressing showed higher ethylene evolution than that of low nitrogen level. High positive correlation was detected between nitrogen application and ethylene evolution.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.121-127
• /
• 2004

The instantaneous removal of ethylene glycol is very important fur obtaining high molecular weight polymer because of the reversibility of the polycondensation reaction of poly(ethylene naphthalate)(PEN). In this study, we investigated the mass transfer phenomena in the thin film of PEN oligomer where the polycondensation reaction took place at 280$^{\circ}C$ and under 0.1mmHg. In case of less than 0.025cm film thickness the mass transfer resistance through the thin film of the polymer melt was not so high that the overall reaction rate was governed only by the polycondenstion reaction. Both the mass transfer model and the diffusion model predicted the experimenatal data well but the diffusion model showed faster reaction rate in the low molecular weight range than the mass transfer model . It was estimated from the two models that the diffusivity was 4.7${\times}$10$\^$-6/$\textrm{cm}^2$/sec and the mass transfer coefficient was 1.4 ${\times}$10$\^$-4/cm/sec both of which were smaller than In case of poly(ethylene terephthalate).

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1025-1032
• /
• 2009

This study investigated a possibility to develop an adsorption process for volatile organic compounds (VOCs) of the solvent emitted during dry cleaning. Pitch activated carbon fiber (ACF) was chosen as an adsorbent of VOCs, and an electric swing adsorption process was utilized for the reproduction of the adsorbent after the completion of VOCs adsorption. Effects of ACF types and several solvents such as trichloroethylene (TCE) and toluene were examined on breakthrough curves and amounts of adsorbed VOCs. ACF was pretreated under various conditions in order to enhance the amounts of the adsorbed VOCs. Temperatures and voltages were measured for the reproduction of the ACF after full adsorption. ACF having micropores exhibited high adsorption of TCE, and high surface area of ACF could increase the adsorption property of toluene. In general, ACF could adsorb 41~54% TCE of the adsorbent weight. The increase of inlet VOCs concentration significantly decreased the breakthrough time and slightly lowered the amounts of adsorbed VOCs. Thus, ACF could effectively adsorb VOCs in low concentration in the feed stream. ACF pretreated by heat under vacuum showed excellent toluene adsorption with controlling oxygen functional groups on the ACF surface, which revealed that vacant carbon site could be the adsorption point of toluene. Most adsorbed toluene was desorbed at $150^{\circ}C$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.655-662
• /
• 1996

기술적으로는 다짐장비의 개선으로 성토다짐의 시공속도가 매우 빨라지고 있으나 국내에서 적용하고 있는 현장다짐 밀도 및 수분함량 측정 방법(KS F 2311 KS F 2306)$^{(1)}$ 은 신속한 측정을 어렵게 하고 있다. 본 연구는 외국에서 개발 현재 활발히 적용되고있는 방사성동위원소를 이용한 함수량측정기개발의 시작단계로 기본설계 결정을 목적으로 한다. 함수량 측정 RI계기의 원리를 먼저 살펴본 후 실험실 내에서 자연건조된 성토용 흙으로 다짐을 하여 공시체를 제작한 뒤, 실험실용 함수량측정 RI계기를 공시체위에 놓고 폴리에틸렌과 중성자 검출기의 개수를 변화시켜가며 일정시간동안 측정개수를 측정한 값을 분석한 결과 목표측정 시간을 1분으로 하였을 때 신뢰측정개수인 10,000개이상을 계측하면서도 경제적으로 최소인 중성자검출기의 개수는 2개, 폴리에틸렌의 두께는 7cm로 결정되었다.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.69-77
• /
• 2011

Ethylene glycol (EG) is produced commercially in large amounts and is widely used as antifreeze or deicing solution for cars, boats, and aircraft. EG poisoning occurs in suicide attempts and infrequently, either intentionally through misuse or accidental as EG has a sweet taste. EG has in itself a low toxicity, but is in vivo broken down to higher toxic organic acids which are responsible for extensive cellular damage in various tissues caused principally by the metabolites glycolic acid and oxalic acid. The most conclusive analytical method of diagnosing EG poisoning is determination of EG concentration. However, victims are sometimes admitted at a late stage to hospitals or died during emergency treatment like a gastric lavage or found rotten dead, when blood EG concentrations are low or not detected. Therefore, in this study, the identification of EG was not only performed by gas chromatograpyc-mass spectrometry (GC-MS) following derivatization but also further toxicological analyses of metabolites, glycolic acid (GA) and oxalic acid (OA), were performed by ion chromatography in various biological specimens. A ranges of blood concentrations (3 cases) was $10\sim2,400\;{\mu}g/mL$ for EG, $224\sim1,164\;{\mu}g/mL$ for GA and ND $\sim40\;{\mu}g/mL$ for OA, respectively, In other biological specimens (liver, kidney, bile and pleural fluid), a range of concentrations (3 cases) was ND $\sim55,000\;{\mu}g/mL$ for EG, ND $\sim1,124\;{\mu}g/mL$ for GA and ND $\sim60\;{\mu}g/mL$ for OA, respectively. Liver and kidney tissues were recommended specimens including blood because OA, a final metabolite of EG, was identified large amounts in these despite no detectable EG caused by some therapy.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.183-188
• /
• 2009

Structural rearrangements of uni-axially deformed polyethylenes containing 1-octene comonomer and HDPE upon heating were investigated by time-resolved small and wide angle X-ray scattering techniques. During heating, structural changes including crystal transformation and lamellar rearrangement noted were very different depending on the comonomer contents. At low comonomer content below 2 wt%, inverse martensitic transformation of crystal lattice from monoclinic to orthorhombic cell and the rearrangement of broken lamellar units into more ordered and perfect lamellar stacks were noted with the temperature increase. At high contents above 9.5 wt%, however, polyethylene copolymers showed neither the crystal transformation nor lamellar rearrangement that can be attributed to low crystallinity and high content of branch units.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2005

PTFE (polytetrafluoroethylene) thin films were prepared from the pellets of the graphite doped PTFE via pulsed laser ablation with 1064 nm Nd:YAG laser. The graphite powder converts the absorbed photon energy into thermal energy which is transmitted to nearby PTFE. The PTFE is decomposed by thermal process. The deposited films were transparent and crystalline. SEM (scanning electron microscopy) and AFM (atomic force microscopy) analyses indicated that the film surface morphology changed to fibrous structure with increasing thickness. The fluorine to carbon ratios of the film were 1.7 and molecular axis was parallel with (100) Si-wafer substrate. These results obtained by XPS (X-ray photoelectron spectroscopy), FTIR (fourier transform infrared spectroscopy) and XRD (X-ray diffraction).

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.553-556
• /
• 2005

Pyrolysis of polyethylene was carried out in the stainless steel reactor of internal volume of $40cm^3$. Pyrolysis reactions were performed at temperature $390-450^{\circ}C$ and the pyrolysis product were collected separately as reaction products and gas products. The molecular weight distributions(MWDs) of each liquid product were determined by GC-SIMDIS. Molecular weight of each product were decreased wi th increase of react ion temperature and time.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.891-897
• /
• 2017

Apple (Malus domestica) is a climacteric fruit because of its high respiration and ethylene production. Ethylene affects the fruit by decreasing its quality and storability. Md-ACS1 and Md-ACO1 genes are involved in ethylene biosynthesis in apple; the Md-ACS1-2 and Md-ACO1-1 alleles are associated with low ethylene production. We conducted an analysis to study Md-ACS1 and Md-ACO1, and to examine ethylene production and softening rate of fruit at room temperature ($20^{\circ}C$) storage in 'Fuji (FJ)', 'Golden Supreme (GS)', and 5 cultivars of Korean apples ('RubyS (RS)', 'Hongro (HR)', 'Arisoo (AS)', 'Summer King (SK)', 'Greenball (GB)'). The result showed that an increase in the number of the alleles (ACS1-2, ACO1-1) decreased the ethylene production and softening rate. The presence of ACS1-1/1, ACO1-1/2 was confirmed in GS and the highest ethylene production and softening rate was observed. Ethylene production and softening rate of SK and GB expressing ACS1-1/2, ACO1-1/2 were higher than that of HR and AS, expressing ACS1-2/2, ACO1-1/2, but lower than GS. FJ with ACS1-2/2, ACO1-1/1 showed the lowest ethylene production and softening rate among all cultivars except RS. The Md-ACS1 and Md-ACO1 DNA markers could potentially be used to estimate storability and applied in marker assisted selection the improve the efficiency of apple breeding.