• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.103-109
• /
• 2007

LCD (Liquid Crystal Display) is widely used electronic product. It needs too many processes such as PECVD (Plasma Enhanced Vapor Deposition), Sputtering, Photo-lithography, Dry etch. Each process is important but inspection process is more important because most companies emphasis on the six sigma. Recently, LCD inspection system is composed with inlet, inspector, outlet air pads. LCD is inspected on air pad which is shooting air from air hole. This paper studies on pad design of air bearing for LCD inspection to minimize LCD fluctuation. This design is able to reduce fluctuation and then satisfies CCD inspectional range. Also inspection pad needs to adequate stable area.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.176-181
• /
• 2011

The fan and pad evaporative cooling system is one of the main cooling methods in greenhouses. Its efficiency is very high, but it has some disadvantages as temperature gradient in greenhouse is large. This study was conducted to reduce the internal temperature gradients in the fan and pad cooling greenhouses. Experiments on cooling performance were carried out in a greenhouse equipped with air duct and integrated fan and pad system as an idea of this study. It showed that the cooling efficiency of an integrated fan and pad system was 75.7% in the first stage and 88.6% in the second stage. When this cooling system was operated for an unshaded and a shaded greenhouse, there were cooling effects of $5.7\sim7.6^{\circ}C$ and $7.4\sim9.7^{\circ}C$ to the control greenhouse, respectively. Maximum temperature differences in a cooling greenhouse, with a length of 18m, were $1.6\sim1.7^{\circ}C$ for shaded conditions and $2.3\sim2.7^{\circ}C$ for unshaded conditions. This greenhouse cooling method, with air duct and integrated fan and pad system, can reduce about 40~50% of the internal temperature gradients in the usual fan and pad cooling greenhouses.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.355-358
• /
• 2011

방충재(fender)는 항만에서 선박의 안전한 접이안, 계류, 안벽 보호를 하기 위하여 설치된 중요한 안벽 시설 중 하나이다. 기존의 고무 방충재는 접안력에 의한 초기 변형 28% 정도에서 가장 높은 반력이 발생하기 때문에 선박과 안벽에 지속적인 힘을 주기 때문에 안벽 및 선체에 손상을 주고 있다. 이는 잔교식이나 중력식 부두에서도 나타나는 현상이다. 또 선체의 용접 비드에 의하여 방충재 훼손으로 보수 유지비가 증가하고 안벽에 앵커로 고정된 고무 펜더는 유연성이 떨어져 선박 충격에 의한 쉽게 떨어지고 패널패드도 탈락된다. 이 연구에서는 초기 반력이 적은 에어 펜더 혹은 폼 펜더를 제안한다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.3
• /
• pp.161-168
• /
• 2014

This study conducted a comparative analysis of the contraction pattern of trunk and lower limbs muscles of handicapped children with brain lesions during the use of foam pad and air pad for fixing a standing table to the body for pediatric patients with brain lesions using a standing table product applied with a pneumatic air fitting system. There was a difference in the measurement of muscle strength activity by muscle in accordance with pad type (foam pad vs. air pad). A large difference was found with big movements (movements of eating), while a small difference was discovered with small movements (writing and reading movements). This was found to furnish a little more comfort to users compared with the existing foam pad during the use of a standing table product applied with a pneumatic air fitting system.