• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1633-1639
• /
• 2010

Recently Wireless sensor networks have been used for many purposes and is active for this study. The various methods to reduce energy consumption, which are actively being studied Wireless sensor network to reduce energy consumption, leading to improve transport efficiency, Cluster can be viewed using the research methods. Cluster method researches consists of a sensor node to the cluster and in among those they take out the Cluster head node and Cluster head node is having collects sensing information of circumferential nodes sensing to sink node transmits. Selected as cluster head sensor nodes so a lot of the energy consumption is used as a cluster head sensor nodes is lose a shorter life span have to be replaced by another sensor node. In this paper, to complement the disadvantages of a cluster-mesh method, proposes to manage memory efficiently about filtering method for sensing data. Filtering method to store the same data sensing unlike traditional methods of data filtering system sensing first sent directly by the hashing algorithm to calculate the hash table to store addresses and Sensing to store data on the calculated address in a manner to avoid duplication occurred later, and sensing data is not duplicated by filtering data to be stored in the hash table is a way.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.63-68
• /
• 2012

The VLC (visible light communication) system is communication technology using visible rays (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. Also, VLC system has the above advantage about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. However, the signal detection performance for the receiver near the network of transmitter boundary is severely degraded and the transmission efficiency decreased due to the influence of the interference signal from the adjacent networks. In this paper, we propose an interference mitigation method with optical relay and optical beamforming scheme in VLC systems, and evaluate the reception performance. For the system BER, the proposed system demonstrates the performance enhancement compared to the not using the optical relay and optical beamforming scheme, and SNR performance gain and higher channel capacity is achieved.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.22-31
• /
• 2007

The proposed algorithm in this paper is based on the wavelet decomposition and the energy computation of composed blocks so the amount of calculation and complexity is minimized by adaptively replacing the DWT coefficients and managing the resources effectively. We are now living in the world of a lot. of multimedia applications for many digital electric appliances and mobile devices. Among so many multimedia applications, the digital image compression is very important technology for digital cameras to store and transmit digital images to other sites and JPEG2000 is one of the cutting edge technology to compress still images efficiently. The digital cm technology is mainly using the digital image compression features so that those images could be efficiently saved locally and transferred to other sites without any losses. JPEG2000 standard is applicable for processing the digital images usefully to keep, send and receive through wired and/or wireless networks. The discrete wavelet transform (DWT) is one of the main differences to the previous digital image compression standard such as JPEG, performing the DWT to the entire image rather than splitting into many blocks. Several digital images m tested with this method and restored to compare to the results of conventional DWT which shows that the proposed algorithm get the better result without any significant degradation in terms of MSE & PSNR and the number of zero coefficients when the energy based adaptive DWT is applied.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.437-441
• /
• 2006

Wireless sensor network consists of sensor nodes which are disseminated closely to each other to collect informations for the various requests of a sensor application applied for sensing phenomenons in real world. Each sensor node delivers sensing informations to an end user by conducting cooperative works such as processing and communicating between sensor nodes. In general, the power supply of a sensor node is depends on a battery so that the power consumption of a sensor node decides the entire life time of a sensor network. To resolve the problem, optimal routing algorithm can be used for prolong the entire life time of a sensor network based on the information on the energy level of each sensor node. In this paper, different from the existing Directed Diffusion and SPTN method, we presents a data dissemination protocol based on lower-power consumption that effectively maximizes the whole life time of a sensor network using the informations on the energy level of a sensor node and shortest-path hops. With the proposed method, a data transfer path is established using the informations on the energy levels and hops, and the collected sensing information from neighboring nodes in the event-occurring area is merged with others and delivered to users through the shortest path.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.59-64
• /
• 2009

This paper is intended to study how well the routing protocol supplied in wireless mesh networks can evade interference path along the applied routing metric. Wireless mesh networks, unlike existing network techniques, has the characteristics that node movement is less and energy effect is limited. Therefore. this type of network requires path configuring technique to reflect such network characteristics and new routing metric to determine proper path. Routing metric proposed recently is designed to produce link quality accurately, but it configures path not considering the traffic situation of adjacent nodes. Thus. this technique has the problems of reduced transfer rate and delay between terminals occurring due to frequent traffic chaos by the interference of adjacent nodes. Therefore, this paper proposes metric that configures routing path by finding like metric that can transfer data effectively by considering the traffic situation of adjacent nodes. We confirmed through simulation that the proposed routing metric reduces the delay between terminals via the path that evades the traffic interference of adjacent node.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1219-1224
• /
• 2018

Nowaday, smart mobile devices on Internet of Things are required to process and deliver greate amount of data in real-time. Therefore, heterogeneous mult-core architecture such the big.LITTLE core architecture, which shows high energy conservation while guaranteeing high performance, are widely employed on up to date smart mobile devices. The LITTLE cores should be highly utilized to gain higher energy conservation because LITTLE cores have much higher energy efficiency than big cores. In this paper, we propose a core selection algorithm, which tries to firstly assign a real-time task on a LITTLE core rather a big core while the task can be finished within its own deadline. We also perform simulation as performance evaluation to show that our proposed algorithm shows higher energy conservation while guaranteeing the required performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.158-159
• /
• 2011

Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.407-416
• /
• 2009

Recently, various application services in wireless sensor networks are more considered than before, and thus reliable and secure communication of sensor network is turning out as one of essential issues. This paper studies such communication in IEEE 802.15.4 based sensor network. We present IMHRS (IEEE 802.15.4 MAC-based Hybrid hop-by-hop Reliability Scheme) employing EHHR (Enhanced Hop-by-Hop Reliability), which uses Hop-cache and Hop-ack and ALC (Adaptive Link Control), which considers link status and packet type. Also, by selecting security suite depending on network and application type, energy efficiency is considered based on HAS (Hybrid Adaptive Security) Framework. The presented schemes are evaluated by simulations and experiments. Besides, the prototype system is developed and tested to show the potential efficiency.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.364-369
• /
• 2012

Location information is a critical element of ubiquitous computing. Cricket is an indoor location-based system that transmits radio and ultrasonic signals in regular intervals to calculate the distance between nodes. However, the amount of signal interference and collisions increases in proportion with the number of nodes, losing the accuracy of the location-based system. This study proposes an algorithm based on the 802.15.2 MAC protocol for the wireless sensor network to reduce signal interference and collision by employing node numbers and the frequency reuse approach used in mobile telecommunication. We analyzed the performance of our algorithm. The obtained results showed that the algorithm is an effective for throughput and energy compared to the Cricket system.