• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.561-566
• /
• 2008

The reciprocating compressor is widely used in the industry field, because it has simple principle and high efficiency. In this work, in order to improve design of discharge passage line in hydrogen compression system Numerical analysis was conducted. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including velocity, pressure and turbulence kinetic energy distribution of hydrogen gas going out from the cylinder to discharge-path line are presented in this paper. Discharge-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows velocity, pressure and turbulent kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement might be done.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.99-105
• /
• 2017

Generally, stereo matching methods are used to estimate depth information based on color and spatial similarity. However, most depth estimation methods suffer from the occlusion region because occlusion regions cause inaccurate depth information. Moreover, they do not consider the temporal dimension when estimating the disparity. In this paper, we propose a temporal stereo matching method, considering occlusion and disregarding inaccurate temporal depth information. First, we apply a global stereo matching algorithm to estimate the depth information, we segment the image to occlusion and non-occlusion regions. After occlusion detection, we fill the occluded region with a reasonable disparity value that are obtained from neighboring pixels of the current pixel. Then, we apply a temporal disparity estimation method using the reliable information. Experimental results show that our method detects more accurate occlusion regions, compared to a conventional method. The proposed method increases the temporal consistency of estimated disparity maps and outperforms per-frame methods in noisy images.

• Plant Journal
• /
• v.12 no.4
• /
• pp.32-36
• /
• 2016

In this study, a penalty cost appropriation methodology for CGAM performance acceptance test was suggested. As the result of CGAM performance test, there were 0.31% decreases in electricity output, 0.39% decreases in heat rate on electricity output, 0.31% increases in heat output, and 0.23% increases in heat rate on heat output. As the result of penalty cost appropriation for above performance, the penalty cost was calculated as -$20,837 in electricity output, -$25,930 in heat rate on electricity output, +$10,340 in heat output, and +$7,715 in heat rate on heat output. Each penalty is appropriated as above fore kinds, however the total penalty should be determined as how to combine above fore kinds of penalty. In our calculation, the minimum total penalty was -$18,215 and the maximum total penalty was -$46,767. The methodology of total penalty appropriation should be determined in the contract between ordering organization and construction firm, and we can understand that it is very important.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1862-1866
• /
• 2010

기후변화에 관한 정부간 협의체(International Panel on Climate Change, IPCC) 4차 보고서에는 21세기말 지구의 평균기온이 최대 $6.4^{\circ}C$ 까지 더 상승할 것으로 전망하였다(IPCC, 2007). 지구의 평균온도는 지난 100년 동안 $0.74^{\circ}C$ 상승하였으며 그중 0.45%는 최근 25년간 상승한 것이며 이것은 지난 100년 보다 2.4배나 빠르게 상승하고 있는 추세이다. 우리나라의 경우 기온이 전 지구평균기온에 비해 2배 이상 높은 $1.5^{\circ}C$정도 상승 하였다. 또한 온실가스 증가 속도는 다른 나라에 비해 빠르게 진행되고 있으며, 1990년에서 지난 2001년간 다른 OECD국가들과 비교했을 때 가장 빠르게 증가하고 있을 뿐 아니라($CO_2$배출량은 OECD국가 중 10위) 현재와 같은 에너지 다소비형 산업구조와 소비패턴으로는 온실가스 배출량이 감소할 가능성은 낮은 것으로 분석된다. 따라서 우리나라의 경우 다른 국가에 비하여 기후변화에 취약한 위치에 있고 민감하게 반응함에 따라 미래 기후변화에 대한 영향은 우리나라 농업수자원에 큰 영향을 미칠 것으로 판단된다. 본 연구에서는 기상청에서 제공하는 MM5 기상자료를 이용하여 농업용저수지 필요저수량 변화를 예측하였다. MM5 기상자료는 충남 서산관측소 과거 관측자료를 이용하여 편의보정을 거쳐 재추출하였다. 생성된 자료는 물수지분석 입력 자료로 구축하여 충남에 위치한 고풍저수지에 대하여 필요저수량변화를 예측하였다. 그 결과 기온상승으로 인한 실재증발산량은 676mm에서 717mm로 41mm가 증가하였으며, 소비수량 또한 1,617mm에서 1,659mm로 42mm 증가하였다. 유효우량은 2020s는 520mm 이였으나 2080s는 533mm으로 13mm 증가한 것으로 분석되었다. 본 자료를 이용하여 고풍저수지의 필요저수량을 분석한 결과 2020s, 2050s, 2080s 각각 31.2%(3,538.9천$m^3$), 16.0%(1,489.7천$m^3$), 26.6%(2,834.5천$m^3$)가 부족한 것으로 예측되었다. 이는 강우량은 증가하나 기준년도에 비하여 5월 8월이 낮게 예측된 것이 가장 큰 원인으로 분석되었다. 따라서 소비수량은 증가하지만 유효유량의 부족으로 필요저수량이 부족한 것으로 예측되었다.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.256-262
• /
• 1988

During soaking of 4 varieties of Korean soybeans in water at $4-98^{\circ}C$, an equilibrium state was reached after 3 hr at $60-98^{\circ}C$ but no equilibrium state was observed at $4-40^{\circ}C$ during soaking for 10 hrs. The moisture gain of soybeans held a linear relation with the square root of soaking time regardless of soaking temperatures, which indicated that the basic mechanism of water absorption was diffusion of water. The log time to reach a fixed moisture content showed a linear relation with the soaking temperature during soaking of soybeans at $4-60^{\circ}C$. The z-value decreased in proportions to the increase of hydration. The z-value to reach 50% hydration was the same in all soybeans.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.333-341
• /
• 2015

As results of X-ray diffraction analysis, samples of asbestos and soil were composed maily of dolomite ($CaMg(Co_3)_2$, tremolite ($Ca_2Mg_5Si_{18}O_{22}(OH)_2$), actinolite ($Ca(Mg,\;Fe)_6Si_8O_{22}(OH)_2$), talc ($Mg_3Si_4O_{10}(OH)_2$), calcite ($CaCO_3$) and small amounts of quartz ($SiO_2$) and clay minerals. The average size of asbestos fibers was about $100{\mu}m$ and maximum of some asbestos was $250.0{\mu}m$ in length. The aspect ratio of asbestos fiber were over 3 : 1 and inclined extinction in the range of $8.0-19.5^{\circ}$. Single isolated fragments of asbestos are probably fiber and acicula form in crystal edge along the cleavage plane. Tremolite that composed main asbestos mineral in rock and soil around Dong-a mine is higher content of Fe than actinolite asbestos.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.3
• /
• pp.31-39
• /
• 2010

The particle system based on quad mesh has been posed to model cloth. But we need to develop cloth models on triangular meshes because they are widely used. Cloth modeling on triangular mesh is often done in the style of finite element method, which assumes that material is continuous. To preserve the advantages of particle system, e.g. model simplicity and the ease of implementation, even on triangular mesh, this paper proposes a particle system on triangular mesh. The motion of cloth is modeled so that vertices interact with each other via the edges on the triangular mesh. The interactions of vertices are assumed to exist between every adjacent vertex and between every other vertex. The deformation energy due to interaction is constructed based on the theory of elasticity. The contribution of the paper is to implement the advantages of particle system on triangular mesh.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.785-791
• /
• 1993

Kinetic studies were performed to investigate free-fructose content change in rice during storage. The rice was stored at various water activities(0.44, 0.52, 0.65 and 0.75) and at fluctuating temperature($30/50^{\circ}C$) over period of 22 weeks. At early stage of storage free-furctose content increased by zero-order reaction, whereas at later stage, it decreased by first-order reaction. The reaction rates were positively related to water activity and/or temperature during storage. Activation energies calculated at range of aw 0.44~0.75 were found to be 10.76~19.56kcal/mole and 4.53~8.40kcal/mole, for the period of increase and decrease in the free-fructose contents, respectively. The shelf-life assessed at $25^{\circ}C$ was found to be 252(aw 0.44), 212 (aw 0.52), 193(aw 0.65) and 162(aw 0.75) days.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.579-587
• /
• 2006

Recently, each country has been trying to promote Eco-Industrial Park (EIP) development for industrial sustainability. Technological modeling is required to realize EIP practically even though the project contains the political concerns for many companies, government, and self-governing bodies. The four main technologies of the EIP developments include energy exchange, material flow analysis, water pinch, and life cycle assessment. Material flow analysis (MFA) methodology can be utilized in EIP modeling in view of the fact that the analysis of material flows and the optimized modeling are major purposes for the technological modeling of EIP. Through MFA methodology in POHANG EIP project, how to apply MFA modeling to EIP modeling and how to utilize software for MFA modeling are shown in this research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.274-281
• /
• 2006

Sensor network applications need synchronized time extremely such as object tracking, consistent state updates, duplicate detection, and temporal order delivery. This paper describes reliable time synchronization protocol (RTSP) for wireless sensor networks. In the proposed method, synchronization error is decreased by creating hierarchical tree with lower depth and reliability is improved by maintaining and updating information of candidate parent nodes. The RTSP reduces recovery time and communication overheads comparing to TPSN when there are topology changes owing to moving of nodes, running out of energy and physical crashes. Simulation results show that RTSP has about 20% better performance than TPSN in synchronization accuracy. And the number of message in the RTSP is $20%{\sim}60%$ lower than that in the TPSN when nodes are failed in the network. In case of different transmission range of nodes, the communication overhead in the RTSP is reduced up to 40% than that in the TPSN at the maximum.