• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.168-177
• /
• 2008

The code propagation is one of the most important technic for software update in wireless sensor networks. This paper presents a new scheme for code propagation using network coding. The proposed code propagation method roughly shows 20$\sim$25% performance improvement according to network environments in terms of the number of data exchange compared with the previously proposed pipelining scheme. As a result, we can efficiently perform the software update from the viewpoint of speed, energy, and network congestion when the proposed code propagation system is applied. In addition, the proposed system solves the overhearing problems of network coding such as the loss of original messages and decoding error using the predefined message. Therefore, our system allows a software update system to exchange reliable data in wireless sensor networks.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.191-206
• /
• 1987

Keum River discharges 6.4billion tons of fresh water annually into the Yellow Sea. More than 60% of the total discharge is concentrated in summer, differentiating distinct low-discharge and high-discharge periods for the estuarine environment. The concentration of SPM(Suspended Particulate Matter) is, in general, very high, except sometime during rainy season, and turbidity maximum is often observed, especially during spring-tides(Lee and Kim, 1987).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.692-698
• /
• 2015

This paper represents a trajectory design and analysis technique which uses invariant manifolds of the circular restricted three body problem. Instead of the classical patched conic method based on 2-body problem, the equation of motion and dynamical behavior of spacecraft in the circular restricted 3-body problem are introduced, and the characteristics of Lyapunov orbits near libration points and their invariant manifolds are covered in this paper. The trajectories from/to Lyapunov orbits are numerically generated with invariant manifolds in the Earth-moon system. The trajectories in the Sun-Jupiter system are also analyzed with various initial conditions in the boundary surface. These methods can be effectively applied to interplanetary trajectory designs.

• Environmental and Resource Economics Review
• /
• v.24 no.1
• /
• pp.141-164
• /
• 2015

The concept of consumption-based greenhouse gas (GHG) inventory is directly related with the carbon content of international trade. Along the lines of the consumption-based GHG inventory, we investigate domestic and foreign carbon contents embodied in sectoral exports of Korea. In addition to the analysis of carbon content of exports, it is investigated how much share of responsibility for carbon emissions of Korea belongs to each major trading partner of Korea. We also compute the carbon intensities of Korean exports in carbon chain with other trading partners and find some characteristics revealed in Korea's carbon emissions embodied in its exports.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.555-564
• /
• 2016

In recent years, methanol has attracted much attention since it can be cleanly manufactured by the combined use of atmospheric $CO_2$ recycling and water splitting via renewable energy. For the concept of "methanol economy", an active methanol synthesis catalyst should be prepared in a sophisticated manner rather than by empirical optimization approach. Even though Cu/ZnO-based catalysts prepared by coprecipitation are well known and have been extensively investigated even for a century, fundamental understanding on the precipitation chemistry and catalyst nanostructure has recently been achieved due to complexity of the necessary preparation steps such as precipitation, ageing, filtering, washing, drying, calcination and reduction. Herein we review the recent reports regarding the effects of various synthesis variables in each step on the physicochemical properties of materials in precursor, calcined and reduced states. The relationship between these characteristics and the catalytic performance will also be discussed because many variables in each step strongly influence the final catalytic activity, called "chemical memory". All discussion focuses on how to prepare a highly active Cu/ZnO-based catalyst for methanol synthesis. Furthermore, the preparation strategy we deliver here would be utilized for designing other coprecipitation-derived supported metal or metal oxide catalysts.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.125-125
• /
• 2018

반도체 소자의 미새화에 따라 선폭이 10nm 이하로 줄어듦에 따라, 금속 배선의 저항이 급격하게 상승하고 있다. Cu는 낮은 저항과 높은 전도도를 가지고 있어 현재 배선물질로써 가장 많이 사용되고 있지만, 소자가 미세화됨에 따라 Cu를 미래의 배선물질로써 계속 사용하기에는 몇 가지 문제점이 제기되고 있다. Cu는 electron mean free path (EMFP)가 39 nm로 긴 특성을 가지기 때문에, 선폭이 줄어듦에 따라 surface 및 grain boundary scattering이 증가하여 저항이 급격하게 증가한다. 또한, technology node에 따른 소자의 operating temperature와 current density의 증가로 인해 Cu의 reliability가 감소하게 된다. 텅스텐은 EMFP가 19 nm로 짧은 특성을 가지고 있어, 소자의 크기가 줄어듦에 따라 Cu보다 낮은 저항 특성을 가질 수 있으며, 녹는점이 3695K로 1357K인 Cu보다 높으므로 배선물질로써 Cu를 대체할 가능성이 있다. 본 연구에서는 Inductively Coupled Plasma (ICP) assisted magnetron sputtering을 통해 매우 얇은 텅스텐 박막을 증착하여 저항을 낮추고자 하였다. 고밀도 플라즈마의 방전을 위해, internal-type coil antenna를 사용하였으며 텅스텐 박막의 증착을 위해 DC sputter system이 사용되었다. 높은 에너지를 가진 텅스텐 이온을 이용하여 낮은 온도에서 고품위 박막을 증착할 수 있었으며, dense한 구조의 박막 성장이 가능하였다. ICP assisted를 이용하여 증착했을 때와, 그렇지 않을 때를 비교하여 ICP 조건에 따라서 박막의 저항이 감소함을 확인할 수 있었을 뿐만 아니라 최대 약 65% 감소함을 확인할 수 있었다. XRD를 이용하여 ICP power를 인가했을 때, 높은 저항을 갖는 A-15 구조를 가진 ${\beta}$ peak의 감소와 낮은 저항을 갖는 BCC 구조를 가진 ${\alpha}$ peak의 증가를 상온과 673K에서 증착한 박막 모두에서 확인하였으며, 이를 통해 ICP power가 저항 감소에 영향을 미친다는 것을 확인하였다. 또한, 두 온도 조건에서 grain size를 계산하여 ICP power를 인가함에 따라 두 조건 모두 grain size가 증가하였음을 조사하였다. 또한, XPS 분석을 통해 ICP power를 인가하였을 때 박막의 저항에 많은 영향을 끼치는 O peak이 감소하는 것을 통해 ICP assisted의 효과를 확인하였다. 이를 통해, ICP assisted magnetron sputtering을 통해 텅스텐 박막을 증착함으로써 차세대 배선물질로써 텅스텐의 가능성을 확인할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1181-1191
• /
• 1996

To develope chemical heat pump, which is operated by heat of high temperature using available energy sources such as solar heat and many kinds of waste thermal energy we have studied theoretically the enhancement effects of inserted fins on the rate of heat transfer and reaction in cylinderical $Ca(OH)_2$ packed bed reactor. The results obtained by numerical analysis about profiles of temperature, completion time of reaction and exothermic heat amount released from the reactor read as the inserted copper fins in reator reduce the completion time of dehydration reaction in packed bed by half, and the rate of thermochemical reaction depends on the temperature and concentration, and it is also governed by the boundary conditions and the rate of heat transfer in the particle packed bed.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.82-93
• /
• 1993

To extract the tungsten component from the scheelite by the chlorination process, effects of major variables such as the reducing agent, reaction temperature, reaction time, flow rate of the $Cl_2$ gas, and the particle size of the sample, were examined in the batch-boat system. The optimum conditions for this chlorination process were as follows ; reaction temperature above $700^{\circ}C$, carbon weight ratio to the scheelite 0.08, reaction time 20 min, flow rate of the $Cl_2$ gas $0.6{\ell}/min$, particle size of scheelite ore -200 mesh. Under the above conditions, 99% of tungsten component was extracted from scheelite ore. The diffusion step and chemical reaction step were the rate-determining steps at high and low temperature, respectively. Activation energy was 7.98kcal/mol at high temperature region and 31.2kcal/mol at low temperature one.

• Journal of Food Hygiene and Safety
• /
• v.15 no.1
• /
• pp.51-54
• /
• 2000

In the 5'-flanking region of the D-AAT, AspAT and AlaDH gene, I found three or two pairs of sequences(designated as Pl, P2, P3) which show significant similarity to the E.coli consensus sequences of -35 and -10 for promoters. The spacing between -35 and -10 is 16 to 18bp in all the three putative promoters Pl, P2 and P3 which is in good agreement with the preferred spacer length in E.coli and in B.subtilis. Therefore, the putative promoters may also function to increase the efficiency of transcriptional initiation. The most stable, double-helical“Shine-Dalgarno”pairing is formed with a free energy change(ΔG) of -13.0 kcal/mol, -9.6 kcal/mol, -15.8 kcal/mol.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.57-62
• /
• 2003

A bacteria strain producing extracellular $\beta$-mannanase was isolated from soil and was identified as Bacillus subtilis by 16S rRNA sequence comparison and biochemical determinations. The optimum pH and temperature for the $\beta$-mannanase activity were 5.0 and 5.5$^{\circ}C$, respectively. The zymogram technique revealed a single protein band exhibiting $\beta$-mannanase activity from the culture supernatant. The molecular mass of the enzyme was estimated at approximately 130 kDa. The addition of 0.5% lactose or 0.5% locust bean gum to the LB medium caused to Increase significantly the $\beta$-mannanase productivity from Bacillus subtilis JS-1. The cells grown on LB medium supplemented with lactose produced maximal enzyme activity at the stationary phase. In contrast to this, the $\beta$-mannanase was induced at the logarithmic phase from the cells grown on LB medium supplemented with locust bean gum. The discrepancy in induction times suggests that $\beta$-mannanase was induced by different induction mechanisms depending on the carbon sources in Bacillus subtilis JS-1 .