• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.548-555
• /
• 2001

In this paper, we proposed a HVS(human visual system) model-based digital image watermarking which is not only invariant to rotation and translation but also more robust to lossy compression, cropping, and scaling as compared to the conventional method. Fourier transform and log-polar mapping is used to make the proposed algorithm invariant to rotation and translation, and in addition, watermark energy is embedded maximally based on spatial frequency sensitivity of HVS without the deterioration of the invisibility. As a result, the robustness of watermarking is improved both in general image processing operations such as cropping, low pass filtering, and lossy compression and in geometrical transforms such as rotation, translation, and scaling. And, by disjoint embedding of the watermark and the template without intersection, the deterioration of invisibility and robustness is prevented. Experimental results show that proposed watermarking is about 30~75 [%] more robust af compared to the conventional methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.615-621
• /
• 2007

Wind power generation is one of the promising gateways that will solve the energy crisis in the future. The wind power generator studied so far is limited to static interpretation in the areas related to tower. This study broadly sets the form of tower as tubular and jacket, identifies the characteristics of each and aims to find and apply their trend to in actual design and manufacturing process. This paper identified the resonance frequency of tower at each mode and studied their features. Furthermore, this study identified the characteristics of the load that occurs in operation and the effect of additional mass incurring when installed in sea, and it compared the two types of tower and was able to predict their trend.

• Radiation Oncology Journal
• /
• v.10 no.1
• /
• pp.121-123
• /
• 1992

New measurement method for $S_{p}$ factors (Phantom Scatter Factors) is presented. The theoretical development of the approach is disscused showing that $S_{p}$ factors can be obtained from three measurements of ionnization in a blocked, reference field and open field. This method has been tested using $^{60}Co$ gamma rays. The results were within 1% deviation between the theory and the experiment for the $S_{p}$ factor. The new method does not need air measurement, and we could could determine the $S_P$ factors with a small piece of block

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.294-298
• /
• 2002

Polycrystalline $La_{2.1}Sr_{1.9}Mn_3O_{10}$ with layered perovskite structure have been successfully synthesized and investigated with respect to their thermoelectric, electric and magnetic properties. The large magnetoresistance (MR) effect with $-{\Delta}{\rho}/{\rho}_0$ of ∼120% at 0.85T was observed in a wide temperature range below a cusp temperature in resistivity of about 120K, which is well below the magnetic $T_C$. At high temperature, a singnificant difference between the activation energy deduced from the electrical resistivity and thermoelectric power, a characteristic of small polaron, is observed. All of the experimental data can be well explained on the basis of the small polaron model.

• Journal of Science and Technology Studies
• /
• v.9 no.2
• /
• pp.79-102
• /
• 2009

This study reviews the issue of public interests of technologies required in industrial technology policy as well as the demand for changes in industrial technology policy as result of the migration from catch-up to post catch-up innovation system. In fact, the importance of public interests which served as the rationale for government intervention in industrial technology policy have gradually faded, which invited controversies over the legitimacy and effectiveness of government intervention in promoting specific technologies or industries. Today, the existing policy framework has to change to correspond to the post catch-up environment which requires creative technology development. In this context, the Korean government needs to reduce direct support for certain companies or technologies, but increase R&D investment in energy, environment and health and welfare to enhance public interests of technology innovation activities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.589-594
• /
• 2014

Recently, higher capacity and energy density of lithium ion batteries are increasingly demanded for enhancing their performance in view of the rise in the commercial distribution of electric and hybrid vehicles. Computational analysis of a porous structure of vanadium pentoxide cathode was performed, employing a phase field model. The incipient model was designed as a spherical structure with cylindrical-shaped pores. Modifying the diameters and lengths of the pore cylinder and the number of pores, we considered different conditions for the porous vanadium pentoxide cathodes for analyzing their effect on the amount of lithium ion intercalated to them. Subsequently, we optimized the porous structure to contain the largest amount of intercalated lithium ion during discharge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.74-81
• /
• 1987

The orthogonal cutting method of the nodular graphite cast iron in the lathe turning, whose structure were formulated under two kinds of annealing conditions, has been experimentally studied and the results investigated. The various characteristics of machinabilities of the nodular cast iron, depending upon its structure, have been obtained from the results as follows. (1) As depth of cut increases, the shearing strain decreases and tend gradually to increase with increase of ferrite matrix. (2) As depth of cut increases, the shearing stress slightly decreases for P$_{1}$, but it tends to increase for both of P$_{2}$ and P$_{3}$ under the same condition. The annealing effect in the process of light cutting was found to be greater than heavy cutting. (3) The cutting energy slightly decreases with the increassing of the depth of cut, and the effect of decreasing the cutting energy by the annealing is higer the light cutting than the heavy cutting. (4) The cutting equations as follow. P$_{1}$ : 2.phi.+1.58(.betha.-alpha.)=92 deg. P$_{2}$ : 2.phi.+1.40(.betha.-alpha.)=84 deg. P$_{3}$ : 2.phi.+1.37(.betha.-alpha.)=82 deg. (5) The machining constants for P$_{1}$, P$_{2}$ and P$_{3}$ which are the test-pieces in this study and classified according to the containing quantity of ferrite matrix given respectively in 78deg., 70 deg., and 68 deg. From these it can be known that the machining constants slightly decreases with increasing of the quantity of ferrite matrix contained in the nodular graphite cast iron.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.90-95
• /
• 2006

The wall of thermal vacuum chamber which is used for the satellite thermal balance test doesn't absorb satellite's IR emission perfectly and reflects some part of that. It is estimated that small thermal vacuum chamber has relatively larger wall effect than the big one. The small thermal vacuum chamber is required for the small satellite test to reduce the test cost. A quantitative analysis was carried out to investigate the chamber wall effect. As a result, temperature errors caused by chamber wall effect was calculated, and the temperature data acquired in the thermal balance test have been compensated. By defining the optimized area ratio between chamber surface and satellite surface area, the baseline to be able to determine the minimum size of thermal vacuum chamber was established to minimize the wall effect. Also, theoretical analysis about transparent material coating which can reduce the chamber wall effect is conducted.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.214-218
• /
• 1998

This study was performed to stabilize the physical properties of Sodium Carbonate Decahydrate that was selected as a highly concentrative thermal energy storage medium. The addition of ARS(additives to prevent supercooling) showed to prevent the supercooling of Na$_{2}$CO$_{3}$.10H$_{2}$O, and the supercooling was decreased below $1.5^{\circ}C$ with ARS of 3 wt% and the addition of PSC(phase separation controller) of 1.5 wt% controlled the phase separation of Na$_{2}$CO$_{3}$ .10H$_{2}$O with the phase change cycles increased from 0 to 1,500, the phase change temperature and the latent heat has changed in the range of 30$\pm$1.$0^{\circ}C$ and 54$\pm$2.0Kcal.kg$^{-1}$ respectively.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.303-308
• /
• 1998

A bacterial strain which utilizes phenol under denitrifying condition was isolated from the industrial waste water collected from the Chong-ju Industrial Complex. The strain was identified as Pseudomonas species from the morphological, physiological, and biochemical characteristics and designated as HL100. The strain can utilize phenol as the sole source of carbon and energy when nitrate is provided as the terminal electron acceptor. The isolated strain completely degraded 3 mM of phenol within 110 hour with concomitant reduction of nitrate to nitrite. The observed maximum doubling time was 20 hours. Under appropriate condition, complete reduction of nitrate to atmospheric N$_2$ was observed indicating that the isolated strain could perform complete steps of denitrification. The strain showed optimal growth at pH 7.0 and temperature of 37$^{\circ}C$ under denitrifying phenol-degrading condition. The strain can also utilize toluene as the sole carbon and energy source under the same growth condition. However, no growth was detected on xylene and benzene.