• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.214-219
• /
• 2011

Today, various activities to save energy are being conducted around the world. Even in our country, carbon reduction policy is being conducted for low carbon green growth and with this movement, effort to replace energy sources by recognizing the problems on environment pollution and resource exhaustion due to the indiscrete usage of fossil fuel is being made. Therefore, active study on renewable energy is in progress as part of effort to replace the energy supply through fossil fuel and solar ray industry has rapidly developed receiving big strength of renewable energy policies. The conclusion of this study measuring the surface temperature change of single crystal and polycrystalline PV module in green roof system and non-green roof system aspect are as follows. There was approximately $4^{\circ}C$ difference in PV module temperature in green roof system and non-green roof system aspect and this has the characteristic to decrease 0.5% when the temperature rises by $1^{\circ}C$ when the front side of the module is $20^{\circ}C$ higher than the surrounding air temperature following the characteristic of solar cells. It can be concluded that PV efficiency will be come better when it is $4^{\circ}C$ lower. Also, in result of temperature measurement of the module back side, there was $5^{\circ}C$ difference of PV module installed on the PV module back side and green roof system side on the 5th, $3^{\circ}C$ on the 4th, $2^{\circ}C$ on the 5th to show decreasing temperature difference as the air temperature dropped, but is judged that there will be higher temperature difference due to the evapotranspiration latent heat effect of green roof system floor side as the temperature rises. Based on this data, it is intended to be used as basic reference to maximize efficiency by applying green roof system and PV system when building non-green roof system flat roof.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.706-713
• /
• 2001

The influencing factor in drying characteristics of fluidized bed drying with different drying conditions for husked barley were carried out. This fluidized drying mechanism of husked barley was consisted of consecutive two falling rate parts, first falling rate period and second falling rate period without showing constant rate period. The drying rate constant was increased with decreasing charged amount and relative humidity and increasing air temperature and air velocity. Since the drying rate constant expressed by Arrhenius type equation in the falling rate period showed good linearity, the falling rate period was condsidered as the controlling step. The activation energy of first falling step was 1,100 cal/gmol, while for second falling step the values showed 1,600 cal/gmol.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.423-423
• /
• 2013

3~5 족 반도체 물질인 phosphorus 화합물 중 대표적인 InAlP 삼종화합물은 작은 굴절률, 큰 밴드갭, GaAs와 lattice 일치 때문에 큰 주목을 받고 있고, p-type high electron mobility transistors(p-HEMT), laser diodes 등의 고속 전자소자 및 광전 소자에 응용이 가능한 매우 중요한 물질이다. 최적의 소자 응용기술을 위해서는, 정확한 광물성 연구가 수행되어야 하지만 InxAl1-xP 화합물에 대한 유전율 함수 및 전자전이점 등의 연구는 미흡한 실정이다. 이에 본 연구에서는 1.5~6.0 eV 에너지 영역에서 각기 다른 In 조성비를 갖는 InxAl1-xP 화합물의 가유전율 함수 ${\varepsilon}={\varepsilon}_1+i{\varepsilon}_2$와 전자전이점 데이터를 보고한다. GaAs 기판 위에 molecular beam epitaxy (MBE)를 이용하여 InxAl1-xP (x=0.000, 0.186, 0.310, 0.475, 0.715, 0.831, 1.000) 박막을 성장하였고 타원편광분석기를 이용하여 유전율 함수를 측정하였다. 또한 실시간 화학적 에칭을 통하여 시료 표면에 자연산화막을 제거함으로써 순수한 InAlP의 유전율 함수를 측정할 수 있었고, 측정된 유전율 함수를 이차미분하여 In 조성비에 따른 전자전이점을 얻을 수 있었다. 얻어진 전자전이점 값을 이용하여 linear augmented Slater-type orbital method (LASTO) 를 통해 이론적 전자 밴드 구조 계산을 하였고, 이를 바탕으로 $E_0$, $E_1$, $E_2$ 전이점 지역의 여러 전자전이점($E_1$, $E_1+{\Delta}_1$, $E_0'$, $E_0'+{\Delta}_0'$, $E_2$, $E_2'$)의 특성을 정의할 수 있었고, $E_0'$과 $E_2$ 전이점의 에너지 값이 In 조성비가 증가함에 따라 서로 교차함을 발견할 수 있었다. 타원 편광 분석법을 이용한 유전율 함수 및 전자전이점 연구는 InAlP의 광학적 데이터베이스를 확보하는 성과와 더불어 새로운 디바이스 기술 및 광통신 산업에도 유용한 정보가 될 것이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.59-65
• /
• 2007

Rapid variation of coastal ecosystem in the East Sea of Korea, such as fishery resource variation and subtropical chang of bentic flora, accordong to the global warming are actually noticed. In this study we try to identify the characterics of water mass existing in this coastal area and to consider the variation of their physical and chemical properties using data of temperature, salinity and dissolved oxygen obtained by National Fisheries Research & Development Institute from 1960 to 2005. The temperature of all water mass rise during last 45 years; the rise of North Korea Cold Water temperature (about $2.33^{\circ}C$) is 1.5 times higher than that of Tsushima warm water (about $1.6^{\circ}C$), and the temperature rise of Tsushima Surface Water, directly affected by climate chang is $2.57^{\circ}C$, higher than the atmospheric temperature rise during same period, indicating that subtropical change makes progress more rapidly in the coastal marine ecosystem than in the land ecosystem. Otherwise, the salinity in the surface water decrease $0.29\%_{\circ}$ during last 45 years due to the rising trend of rainfall with atmospheric temperature. The dissolved oxygen concentration in the all water mass make a decreasing trend. Specially for the North Korea Cold Water, the dissolved oxygen concentration diminish 0.021 mg/l per year and the decrease in the East Sea Proper Water indicate a change of inner water circulation system.

• Journal of the Korea Society for Simulation
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2015

This research proposed a new method to evaluate the objective validity to launch smart transportation services that various stakeholders are complicatedly inter-connected. First of all, we have designed the fundamental business model to form the smart transportation services and defined the stakeholders taking part in the services. Also, the criteria to evaluate the economical validity has been proposed based on the relationship among stakeholders. Especially, in the case EV drivers and charging service providers, the economical validity depends on the scale of spreading. Therefore, we have compared the two extreme scenarios, the poor and stable level of EV spreading. According to the result, it may be said that EV drivers and charging service providers cannot be guaranteed the economical validity due to the burden of initial investment. On the contrary to this, suppliers of EV and charging gears may secure more than a certain level of profit. In addition, the government may have great profit due to reducing the CO2 emission and cost for importing energy sources. Therefore, it is needed to enhance the level of supporting EV drivers and charging service providers at the first stage. Also, the impact of the ratio of EV and charging service stations on the economical validity of smart transportation should be further investigated.

• Journal of Korea Foresty Energy
• /
• v.23 no.2
• /
• pp.9-20
• /
• 2004

Growth and nutrients of Xinjiang poplar (Populus alba var. pyramidalis) seedlings treated with fertilizers and soil amendments were examined in nursery and windbreak at Dengkou after 6 months of treatments in Inner Mongolia, China. Soil water content was $10\%$ higher than that at most soils in desert. Height and diameter growth and foliar nitrogen (N) concentration were higher at N and nitrogen plus phosphorus (N+P) fertilizer treatments than other treatments. However, there were no differences in foliar P concentration among treatments in windbreak and foliar P concentration was higher at control than at other treatments in nursery. Yuho treatment increased height and diameter growth. Nitrogen appeared an influenciug factor for early growth of Xinjiang poplar, and P had a minor affect on growth. More long-time studies were needed to elucidate the effects of fertilizers and soil amendments on growth and nutrients of Xinjiang poplar.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.36-46
• /
• 1979

Using N_ Ch silicon gate technology . the capacitors and transistors with various dimenssion were fabricated. Although the applied process was somewhat standard the conditions of ion implantation for the gate were varied by changing the implant energies from 30keV to 60keV for B and from 100 keV to 175keV for P . The doses of the implant also changed from 3 $\times$ 10 /$\textrm{cm}^2$ to 5 $\times$ 10 /$\textrm{cm}^2$ for B and from 4$\times$ 10 /$\textrm{cm}^2$ to 7 $\times$ 10 /$\textrm{cm}^2$ for P . The D. C. parameters such as threshold voltage. substrate doping level, the degree of inversion, capacitance. flat band voltage, depletion layer width, gate oxide thickless, surface states, motile charge density, electron mobility. leakage current were evaluated and also compared with the corresponing theoretical values and / or good numbers for application. The threshold voltages measured using curve tracer and C-V plot gave good agreements with the values calculated from SUPREM II which has been developed by Stanford University process group. The threshold vol tapes with back gate bias were used to calculate the change of the substrate doping level. The measured subthreshold slope enabled the prediction of the degree of inversion The D. C. testing results suggest the realized capacitors and transistors are suited for the memory applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.56-64
• /
• 2012

A smart grid is the next generation power grid which combines the existing power grid with information technology, so an energy efficient power grid can be provided. In this paper, in order to build an efficient smart grid an AMI system, which gears with the existing home network and provides an user friendly management function, is proposed. The proposed AMI system, which is based on an extended home network, consists of various functional units; smart meters, communication modules, home gateway, security modules, meter data management modules (MDMM), electric power application modules and so on. The proposed home network system, which can reduce electric power consumption and transmit data more effectively, is designed by using IEEE 802.15.4. The extended home gateway can exchange energy consumption information with the outside management system via web services. The proposed AMI system is designed to enable two-way communication between the home gateway and MDMM via the Internet. The AES(Advanced Encryption Standard) algorithm, which is a symmetric block cipher algorithm, is used to ensure secure information exchange. Even though the results in this study could be limited to our experimental environment, the result of the simulation test shows that the proposed system reduces electric power consumption by 4~42% on average compared to the case of using no control.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.1003-1017
• /
• 2005

이 논문은 단일조사 저출력 $CO_2$ Laser조사가 치주인대 섬유아세포의 증식과 분화에 미치는 영향을 살펴보고 가장 효과적인 에너지와 파워밀도(power density)를 알아보기 위해 다음과 같이 실험하였다. 0.5W 출력, 10.6 ${\mu}m$ 파장, 50 Hz 연속형 $CO_2$ Laser를 사용하여, 실험군은 laser tip과 배양된 세포 사이의 거리를 2cm, 3cm으로 나누고, 조사시간을 1초, 3초로 나누어 4개의 군으로 설정하였고 대조군은 laser를 조사하지 않은 군으로 하였다. 치주인대 섬유아세포의 증삭정도와 골모세포로의 분화정도를 보기 위하여 각각 MTT 실험과 ALP activity 실험을 시행하여 다음과 같은 결과를 얻었다. 1. Laser를 조사하고 난 후 5일째에, 모든 군에서 유의하게 세포가 증식되는 것을 확인할 수 있었고 조사방법간에 유의한 차이가 없었다. 2. 대조군과 살험군에서 0일째에 비하여 3일째, 5일째, 7일째, 10일째에 통계적으로 유의 하게 ALP activity가 증가하였고, 이중 2cm,1sec 군을 제외하면 3일째에서 가장 높은 ALP activity 값을 보였다. 특징적으로 2cm,1sec 군은 3일째부터 10일까지 통계적으로 유의하지는 않지만 시간이 지남에 따라서 ALP activity가 증가함을 보였다. 7일과 10일째에는 2cm,1sec, 3cm,3sec군에서 다른 군에 비하여 큰 activity값을 보였다. 이번실험에서 저출력 $CO_2$ Laser 조사는 세포의 증식보다는 분화에 더 큰 영향을 끼쳤고, 2cm, 1sec, 3cm, 3sec 군이 치주인대 섬유아세포의 분화에 가장 효과적인 laser 조사방법으로 분석되었다.

• Journal of Hydrogen and New Energy
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2014

Mg hydride has a high hydrogen capacity (7.6%), at high temperature, and is a lightweight and low cost material, thus it a promising hydrogen storage material. However, its high operation temperature and very slow reaction kinetics are obstacles to practical application. In order to overcome these disadvantages of Mg hydride, graphene powder was added to it. The addition of graphene has been shown to reduce the operating temperature of dehydrogenation. Moreover, in this report the environmental aspects of $MgH_x$-Graphene composites are investigated by means of the environmental life cycle assessment (LCA) method. $MgH_x$-Graphene mixture was prepared by hydrogen induced mechanical alloy (HIMA). The synthesized powder was characterized by XRD(X-ray Diffraction). The hydrogenation behaviors were evaluated by using a Sievert's type automatic PCT apparatus. Such evaluation of Materials also conducted in the LCA. From the result of P-C-T(Pressure-Composition-Temperature) curves, the $MgH_x$-3wt.% graphene composite was evaluated as having a 5.86wt.% maximum hydrogen storage capacity, at 523K. From absorption kinetic testing, the $MgH_x$-7wt.% graphene composite was evaluated as having a maximum 6.94wt.%/ms hydrogen absorption rate, at 573K. Environment evaluation results for the $MgH_x$-graphene composites and other materials indicated environmental impact from the electric power used and from the materials themselves.