• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.223-234
• /
• 1993

The main characteristics of PHC piles is that silica material and autoclave curing technique are used when manufacturing to have higher strength than PC piles. In this paper, pile drivability and bearing capacity characteristics of the PHC piles are studied through numerical analysis based on wave propagation theory, driving records and pile load tests in situ. It is found that we can have higher bearing capacity by using the PHC piles rather than the PC on condition that the most effective driving equipment is chosen when driving the pile. In other words, since the PHC piles have higher resistance to driving energy, the heavier ram can be used in the driving process, which results in the higher bearing capacity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.267-276
• /
• 1993

This paper discusses the neural network application in the study on the obstacle avoidance of robot manipulator during the trajectory planning. The collision problem of two robot manipulators which are simultaneously moving in the same workspace is investigated. Instead of the traditional modeling method, this paper processing based on the calculation of joint angle in the cartesian coordinate with constrained condition shows the possibility of real time control. The problem of the falling into the local minima is cleared by the adaptive weight factor control using the temperature adding method. Computer simulations are shown for the verification.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.15 no.1
• /
• pp.49-64
• /
• 2020

Objectives : The purpose of this study was to provide a clinical evidence base for the effectiveness of the muscle energy technique (MET) for cervicalgia. Methods : We conducted a search of 10 electronic databases up to April 2019. Randomized controlled trials (RCTs) that performed the MET for cervicalgia were included. The risk of bias was assessed using the Cochrane risk of bias (RoB) tool. Results : Six RCTs met the inclusion criteria. The literature review of these studies showed favorable results for the use of the MET in comparison to other manual medicines. Conclusions : In 6 RCTs, we found that the MET was effective in cervicalgia treatment. However, most of the included studies had an unclear risk of bias. Therefore, well-designed RCTs are necessary to obtain a higher evidence level of the MET use in cervicalgia.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.31-36
• /
• 2011

The flow characteristics on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow have been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio was 0.07 and rib height to channel height ratio was e/H=0.117. The v2-f turbulence model and SST k-${\omega}$ turbulence model were used to find the flow characteristics of near the wall which are suited for realistic phenomena. The numerical analysis results show turbulent flow characteristics and pressure drop at the near the wall as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow, and v2-f turbulence model simulation results have a good agreement with experimental.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.435-447
• /
• 2007

Recently, as MEMS and NEMS devices have been widely used in the various engineering applications, the characteristics of nanoscale systems are investigated in the limelight. However, as opposed to a macroscale system, the identification of the state of nanoscale systems is extremely hard because they can include only the order of $10^3{\sim}10^5$ molecules, which requires highly expensive and accurate experimental apparatus for an investigation. This limitations make the study on nanoscale system use computer simulations. Therefore, it is strongly required to identify the state of nanoscale system simulated in computer simulation. In this molecular dynamics(MD) study, we suggest that the potential energy of individual molecule can be used as criterion for defining the state of clusters or nanoscale systems. In addition, we compared the phase state from the potential energy with one from the radial distribution function(RDF) for verification. The comparison showed that the intermolecular potential energy can be used as a criteria distinguishing the phase state of nanoscale systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.116-121
• /
• 1994

지금까지 대형 구조물에 널리 사용되고 있는 Base Isolator는 특히, 지진하중에 대하여 상부 구조물의 지반분리(base isolation)을 이용한 지진제어를 목적으로 하기 때문에 Seismic Isolator라 한다. 일반적으로 면진베어링에는 LRB(Laminated Rubber Bearing) 방식과 R-FBI(resilient-friction base isolator) 방식으로 크게 나눌 수 있다. LRB 방식은 가장 널리 사용되는 면진베어링으로써 방진고무를 주된 재료로 하고 수직강성을 보강하기 위하여 steel plate를 조합하여 제작하며, 초기강성 및 에너지 소산능력을 증가시키기 위하여 단면중앙에 납(lead plug)를 삽입하기도 한다. R-FBI 방식은 방진고무 적층판 내부에 미끄럼판을 가지고 있으므로 LRB 방식에 비하여 더 큰 수평변위를 발생시킬 수 있다. 이번에 설계 제작한 면진베어링은 LNG 저장탱크의 Seismic Isolation을 목적으로 적용대상의 사양에 맞추어 설계 제작하고 성능평가 시험을 수행하여 LNG 저장탱크, 원자로, 대형 건축물등 지진으로부터 보호되어야 하는 대형구조물의 방진재로 적용할 수 있는가를 평가하고자 한다. 본 논문에서는 제작된 면진베어링의 설계를 검증하고 방진고무(HDR)재료의 물리적 특성시험, 축소모델에 의한 정적, 동적시험을 통하여 시험방법을 소개하고 이러한 시험결과를 기초로 하여 면진베어리의 성능을 평가하였으며, 면진베어링의 온도변화, 외부 수직하중의 변화등에 따른 특성변화와 LNG 저장탱크와 면진베어링의 체결방법에 따른 시험으로 체결방법을 검증하였으며, 대상물의 사양에 적합한가를 고찰하였다.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

Microalgae is considered as one of environmentally sustainable and potential feedstocks to produce biodiesels. However, recent studies on life cycle assessments (LCA) of microalgal buidiesels have shown that energy requirement is not small to produce biodiesel from microalgae, especially during cultivation stage. The costs for carbon sources, nutrients like nitrogen or phosphorous, and water for cultivation can contribute up to 80% of the total medium costs. In the present article, recent trends on the utilization of several promising nutrient sources such as municipal wastewaters, organic fertilizers, combustion exhaust emissions and organic solid wastes were reviewed, and the potential strategies to be used as substitutes of artificial culture media, especially for the biodiesel production, were discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.7
• /
• pp.371-376
• /
• 2013

Recently, many studies related to reducing the energy consumption in data centers have been conducted. These studies have mainly focused on the air intake and exhaust system of a computer room air handling unit (CRAH) in the server room, diffuser type, suppression and discharge of the heat generated from the server, and the air-side economizer system. In this study, the energy consumption of the conventional central chilled water cooling system is compared with the energy consumption of the air-side economizer system. We also examined how changes of differential pressure by each filter have influenced energy consumption, using the power usage effectiveness (PUE). Results show that the PUE was improved, and energy consumption decreased, by applying the air-side economizer system.

• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.85-94
• /
• 2003

발파후에 2차연소 또는 폭발(이하, 2차연소라 한다. )이 일어났다는 사실은 폭약이 폭발후에 어떤 가연성가스가 발생하고 그 가연성가스가 잔존하는 폭발열 또는 기타의 점화원에 의해 연소되었음을 의미한다. 폭약이 폭발하였을 때, 발생 가능한 가연성물질은 유리탄소, 일산화탄소, 수소 등으로 추정할 수 있는데 실험결과에서는 가연성물질의 주성분이 수소인 것으로 나타났다. 본 연구에서는 에멀존계 함수폭약이 산소평형, 알루미늄함량, 알루미늄형태와 크기 그리고 포장지의 두께에 따라 수소가 발생되는 양을 가스크로마토그라피를 이용하여 측정하였다. 상기의 열거한 요인들은 모두 수소발생량과 관계가 있는데, 이중에서도 가장 중요한 요인은 산소평형과 알루미늄의 함량인 것으로 나타났다. 한 예로 알루미늄이 15%가 포함되고 산소평형이 -10인 에멀존계 함수폭약은 폭발후에 19.4%의 수소를 함유하고 있는 후가스를 발생시켰으며 이 가스를 포집하여 공기중에 방출시키면서 성냥불을 가까이 하였더니 연소가 되었다. 따라서 에너지를 높이기 위하여 알루미늄의 함량을 높이고 산소평형을 지나치게 마이너스로 설계한다면, 2차연소는 언제든지 발생할 가능성이 있다고 판단된다. 알루미늄의 함량을 가능한 적게, 산소평형을 가능한 0에 가깝게 설계해야 만이 2차연소 현상을 방지할 수 있을 것이며 ㄸ한 최적의 설계뿐만이 아니라 정확한 제조와 품질검사도 2차연소 현상을 방지하는데 중요한 몫을 할 것으로 판단된다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.94-106
• /
• 1995

A three-dimensional(3D) Monte Carlo simulator for boron ion implantation into <100>single-crystal silicon considering the mask structure has been developed to predict the mask-dependent impurity doping profiles of the implanted boron at low energies into the reduced area according to the trend of a reduction in the size of semiconductor devices. All relevant important parameters during ion implantation have been taken into account in this simulator. These are incident energy, tilt and rotation of wafer, orientation of silicon wafer, presence of native silicon dioxide layer, dose, wafer temperature, ion beam divergence, masking thickness, and size and structure of open window in the mask. The one-dimensional(1D) results obtained by using the 3D simulator have been compared with the SIMS experiments to demonstrate its capabilities and confirem its reliability, and we obtained relatively accurate 1D doping profiles. Through these 3D simulations considering the hole structure and its size, we found the mask effects during boron ion implantation process.