• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.271-276
• /
• 2010

This study manufactured spot lighting fixtures for the broadcasting stage and LED lighting fixtures, measured the illumination, dimming, and color temperature, and installed LED lighting and spot Fresnel lighting to the camera by turns with the same subject to confirm and look into the possibility of replacement of LED lighting fixtures by shooting the figures and comparing them. The analysis of the photographed subject found that the lighting apparatus of LED 144[W] was superior to the tungsten halogen illuminator of 1 [kW] in terms of brightness and color of an image. The measuring of the energy used in 144 [W] LED lighting equipment and tungsten halogen 1[kW] lighting equipment suggested that LED saved more than 80 [%] of energy in the same intensity of illumination. The comparison of the light distribution and light intensity distribution of halogen tungsten illuminator of 1[kW] and LED 144[W] lighting apparatus found that when a subject received concentrated lighting, effective lighting is possible because the illumination intensity on the surface of the lighted subject was high. In performance halls or studios of about 6 [m] height, there is no problem of illumination intensity in LED 144 [W] illuminator. Therefore, it is possible to replace the existing tungsten halogen 1 [KW] illuminator one to one.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.53-61
• /
• 2008

Consider a typical wireless sensor network in which stem nodes form the backbone network of mesh topology while each stem node together with leaf nodes in its vicinity forms a subnetwork of star topology. In such a wireless sensor network, we must heed the following when we design a MAC scheme supporting the packet delivery from a leaf node to a stem node. First, leaf nodes are usually battery-powered and it is difficult to change or recharge their batteries. Secondly, a wireless sensor network is often deployed to collect and update data periodically. Late delivery of a data segment by a sensor node causes the sink node to defer data processing and the data segment itself to be obsolete. Thirdly, extensive signaling is extremely limited and complex computation is hardly supported. Taking account of these facts, a MAC scheme must be able to save energy and support timeliness in packet delivery while being simple and robust as well. In this paper, we propose a version of ALOHA as a MAC scheme for a wireless sensor network. While conserving the simplicity and robustness of the original version of ALOHA, the proposed version of ALOHA possesses a distinctive feature that a sensor node decides between stop and continuation prior to each delivery attempt for a packet. Such a decision needs a stopping rule and we suggest a Bayes stopping rule. Note that a Bayes stopping rule minimizes the Bayes risk which reflects the energy, timeliness and throughput losses. Also, a Bayes stopping rule is practical since a sensor node makes a decision only using its own history of delivery attempt results and the prior information about the failure in delivery attempt. Numerical examples confirm that the proposed version of ALOHA employing a Bayes stopping rule is a useful MAC scheme in the severe environment of wireless sensor network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.174-174
• /
• 2008

초음파를 이용하여 액체 연료를 분사하면 균일한 입경과 미립화가 우수하며 에너지 절약과 공해방지등을 할 수 있다. 또한 유속과 유량에 관계없이 이용할 수 있어 반도체 분야의 웨이퍼와 평판 표시기상에 사진 석판용 화학물질의 균일도포 컴퓨터 하드 디스크의 광택제 도포등에 사용할 수 있다. 이처럼 초저의 유출 용량을 요구하는 모든 공정 및 액체연료의 분사가 요구되는 모든 산업에 적용할 수 있는 장점을 가지고 있다. 하지만 현제까지 주로 사용되고 있는 초음파노즐의 액츄에이터는 단판액츄에이터형로 높은 교류전압을 인가해주어야 하는 단점을 가지고 있다. 이 단점을 해결하기 위해 적층액츄에이터형을 사용하여 초음파 노즐 구동하면 낮은 교류 입력전압에서도 단판액츄에이터형 초음파 노즐과 같은 특성을 가질 수 있다. 또한 초음파 노즐의 구동시 기계적인 진동을 이용하므로 많은 열을 발생시켜 노즐의 온도가 상승하여 세라믹 액츄에이터에도 그 영향을 미치게 되어 열적 열화 현상이 일어날 수 있기에 높은 큐리온도를 가지는 액츄에이터가 필요하다. 본 실험에서는 $Pb(Mn_{1/3}Nb_{2/3})_{0.02}(Ni_{1/3}Nb_{2/3})_{0.12}(Zr_{0.50}Ti_{0.50})_{0.86}O_3$ 조성을 사용하여 $900^{\circ}C$의 저온에서 액상 소결하여 적층혈액츄에이터를 제작하였으며 압전 및 유전 특성을 조사하였다. 제작된 초음파노즐을 구동하기 위해서는 약 36kHz의 30V이상의 교류입력전압 할 수 있는 구동회로가 필요로 한다. 압전액츄에이터의 구동을 위해서는 정확한 정현파 입력이 필요 없다. 압전액츄에이터의 특성상 유사 정현파 입력 만으로도 임피던스 매칭이 이루어지기 때문에 설계가 쉽고 간편한 Push-Pull 방식을 이용한 PWM인버터를 사용하였고 인버터의 출력 주파수를 34~38kHz까지 가변 할 수 있게 설계하였다. 제작된 적층액츄에이터형 초음파 노즐을 PWM인버터로 실제 액체 연료인 경유를 분사하였을 때의 액츄에이터의 온도 변화에 따른 공진주파수와 온도 의존성, 전기적 특성을 조사하고 미립화 분사되는 경유의 미립자 크기 및 최대 분사량을 조사 하였다.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.15-25
• /
• 2012

In order to resolve transportation system focused on vehicles which have led to all sorts of problems such as traffic congestion, air pollution and so on, Korea recently have tended to center around Transit Oriented Development(TOD) which is capable of initiating public traffic demands. It is imperative to develop objective evaluation method which is able to measure pedestrian environment and amenity in order to facilitate green transit. The purpose of this paper is to present evaluation indices and measurement framework of pedestrian environment by analyzing effect on TOD major planning factors such as diversity, density, design, and supply etc. For this, we applied evaluation index with regard to TOD planning factors, investigating connection to pedestrian and employed AHP (Analytic Hierarchy Process) so as to quantify the result of measurement in Jongro 3ga and Hangangjin station. As a result, we presented relationship between travel patterns of pedestrian and each TOD planning factor. More importantly, the proposed framework is expected to make the best of the visualization as well as evaluation method for the pedestrian accessibility, convenience of public transportation, and the mixed land-use patterns in subway area and transit center.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.147-161
• /
• 2022

This study examined changes in the ecological characteristics and design characteristics of Ban's exhibition space in three representative temporary exhibition halls and three permanent exhibition halls designed by Ban Shigeru since 2000. Through the investigation of the concepts and characteristics of ecological architecture, the design characteristics of exhibition space, the analysis framework of the design characteristics of exhibition space and the design elements of ecological architecture is obtained. The analysis results show that there are big changes between the temporary exhibition space and the permanent exhibition space in terms of building scale, space composition, function, materials and technology. On the one hand, the temporary exhibition space used recyclable materials, such as paper tubes, containers to be assembled on site into a single-layer space focused on display. The assembly method was simple and the construction period was short. After the exhibition, the exhibition space were dismantled. The materials were either transported to the next display site or recycled and reused. On the other hand, the permanent exhibition space used reinforced concrete as the main structure, and used a large amount of wood and glass materials to construct a multi-layered composite cultural space that separated the exhibition space and the leisure space. In terms of ecological characteristics, the building materials of the temporary exhibition space were recycled and no industrial wastes were generated after the demolition. The permanent exhibition hall uses eco-friendly wood for the roof and walls, so it is easy to replace and repair. Both types of exhibition halls are changing ecological architecture in a more sustainable direction by saving resources and energy through natural light and ventilation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.470-470
• /
• 2011

환경부 하수재이용사업은 2007년도 하수도법 개정을 통해 공공하수처리시설 처리수의 재이용 의무화를 시작으로 2010년도 "물의 재이용 촉진 및 지원에 관한 법률"의 시행으로 전국적으로 사업이 확대되고 있다. 제주도 월정하수처리장은 2009년도 하수재이용사업지구로 선정이 되어 2010년도부터 농업용목적의 재이용으로 구체적인 설계와 시공이 추진되고 있는 사업지구이다. 제주도에서는 지하수보존을 위해 대체수자원 개발 방안을 시급히 마련중에 있다. 특히, 제주도 농업용수 종합계획수립(제주도, 2004)에는 하수처리수를 농업용수로 이용하기 위한 계획을 수립할 정도로 지하수 사용량을 줄이기 위한 노력을 진행중에 있으며, 그 일환으로 하수재이용사업을 지속적으로 추진하고 있다. 하수처리수의 농업용수 재이용은 사용된 물을 재이용함으로써 물과 에너지를 절약할 수 있고, 유역 또는 해양으로 배출되는 오염원을 억제하는 장점이 있는 반면에 농산물 생육에 직접 영향을 줄뿐만 아니라 주변의 수질 생태 토양 환경 및 영농인의 보건에도 영향을 주기 때문에 장기적인 관찰과 검증작업이 필요하다. 이 에 서울대와 한국농어촌공사는 안전한 농업용수 재이용기술을 개발하기 위해 장기간 현장시험을 통해 재이용 재배기술과 함께 보건환경에 미치는 영향을 검증하였고 그 개발기술을 월정사업지구에 적용하게 되었다. 월정하수처리장이 위치한 제주 동부의 월정지역은 농지면적이 밭(374ha)과 과수(12ha)등 제주도의 전형적인 농촌마을으로 주요 재배작물은 마늘과 당근, 쪽파, 콩 등으로서 농업기반시설의 미비로 영농에 어려움을 호소하고 있으며, 2006년도에 발생한 가뭄으로 그 해 평균 수학량의 30%가 감소된 바 있는 지역이다. 제주도 농업용수 종합계획수립(2004, 제주도)에서는 10년에 한발을 기준 으로 $43,000m^3$/일의 용수가 부족할 것으로 분석하였으며 최근 $35,000m^3$/day 규모의 상수도 확보사업 계획 수립하였으나 여전히 농업용수가 부족하다. 방류수의 수질은 방류수수질기준을 만족하지만 염분함량이 높아 직접 농업용으로 사용하기에는 적당하기 않고, 농업용재이용방류수 수질기준에 맞도록 재이용시스템을 통해 재처리하여 농업용수로 사용해야 한다. 제주도에서는 이미 제주 서부하수처리장 농업용수 재이용사업(이하 판포재이용사업)'이 완료되어 재이용수를 농업용수로 공급하고 있으며 향후 지속적으로 하수재이용사업이 확대될 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

Four developed patents have applied for a new type of Composite Cyclone Scrubber followed by the previous research (Cho and Kim, 2017), including dust reducing fan with filters. Regarding target installation and maintenance cost, 64% reduction for investment costs (6.2 billion won vs. 17 billion won) compared to existing road pollution reduction system, while social benefit costs increase by 43% compared to existing road pollution reduction measures (72.6 billion won vs. 50.8 billion won). The composition of the device is an air blower type spiral guide vane, and an injection pressure collecting dust efficiency. A nozzle varies Injection angle and contact range, spray liquid species (waterworks, salty water). The proposed patent tests are circulation water Time-by-Time Spray and collected 41.4% more increased micro dust since the sprayed water meets contaminated gas due to the 45° degree colliding, which is 141% increased conventional dust collector. (Ratio of collection over 85%). As regards the source of collection liquid, circulated rainwater and well water, we expect a huge amount of energy and economically saved eco-friendly system in our patent. Finally, the guided vane and metal filter reduced over 90% micro-dust, while sprayed water cleans the vane and filters, resultantly minimizing the maintenance budget. The preliminary evaluations of the developed design make it possible to reduce not only cheaper maintenance budget due to the characteristic water spraying but the cost of water comes from mainly rain and underground.

• Clean Technology
• /
• v.2 no.1
• /
• pp.32-43
• /
• 1996

The interactions of the societal-industrial system with the environment form one of the most critical issues in today's world. The inadequacy of current environmental regulatory structures and of traditional ways of analyzing environmental issues, together with the continuing need to mitigate the environmental perturbations arising from this complex relationship, have led to the development of a new conceptual framework termed industrial ecology. Industrial ecology (IE), defined by Graedel and Allenby, is the means by which humanity can deliberately and rationally approach and maintain a desirable carrying capacity, given continued economic, cultural and technological evolution. The concept requires that an industrial system be viewed not in isolation from its surrounding systems, but in concert with them. IE is a systems view in which one seeks to optimize the total materials cycle from virgin material, to finished material, to component, to product, to obsolete product, and to ultimate disposal. Factors to be optimized include resources, energy, and capital. In the present paper, the concept of Industrial Ecology and its application through efficient and practical Design for Environment (DFE) methodologies and tools will be introduced to Korea. This paper will also emphasis on the industrial environment within which DFE methodologies must be used, including the fundamentals of industrial design activities, concurrent engineering, constraints on design choices and existing technological infrastructure.

• Land and Housing Review
• /
• v.4 no.2
• /
• pp.167-176
• /
• 2013

The City Complex Development and TOD originated from the Compact City are entrenched domestically. The New Urban Development such as these changes Structure of Urban space from the Automobile to the Public Transportation. Also, Transit-Oriented Development is drawing attention as sustainability because it has effects of Environment as Green growth. However, An empirical Study is insufficient about Influence Factors of Transit Oriented Development. Therefore This study sets up the Density spaced 1000m apart of Transit Oriented than the existing and did 7 Types considered of Accessibility, Complexity and Design Element according to the Factorial analysis. As a result, this study drew that (1) 'intraregional accessibility of public transit', (2) 'degree of development', 'pedestrian-friendly facility', (3) 'interzonal accessibility of public transit', (4) 'land-use of the city centre', 'complex using of rail station area', 'complementary public transit' are related 201 in number of the Subway stations according to the Multi-dimensional scaling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2083-2090
• /
• 2008

In this paper, we propose a method for control of temperature and the direction of wind in an air-cooler using thermal images and fuzzy inference rules in order to achieve energy saving. In a simulation for controlling temperature, a thermal image is transformed to a color distribution image of $300{\times}400$ size to analyze the thermal image. A color distribution image is composed of R, G and B values haying temperature values of Red, Magenta, Yellow, Green, Cyan and Blue. Each color has a temperature value from $24.0^{\circ}C$ to $27.0^{\circ}C$ and a color distribution image is classified into height hierarchies from level 1 to level 10. The classified hierarchies have their peculiar color distributions and temperature values are assigned to each level by temperature values of the peculiar colors. The process for controlling overall balance of temperature and the direction of wind in an indoor space is as follows. Fuzzy membership functions are designed by the direction of wind, duration time, and temperature and height values of a color distribution image to calculate the strength of wind. After then, the strength of wind is calculated by membership values of membership functions.