• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.781-788
• /
• 2009

Mechanical properties of steel-concrete interface were evaluated on the basis of experimental observations. The properties included bond strength, unbounded and bonded friction angles, residual level of friction angle, mode I fracture energy, mode II bonded fracture energy and unbonded slip-friction energy under different levels of normal stress, and shape parameters to define geometrical shape of failure envelope. For this purpose, a typical type of constitutive model of describing steel-concrete interface behavior was presented based on a hyperbolic three-parameter Mohr-Coulomb type failure criterion. The constitutive model depicts the strong dependency of interface behavior on bonding condition of interface, bonded or unbounded. Values of the interface parameters were determined through interpretation of experimental results, geometry of failure envelope and sensitivity analysis. Nonlinear finite element analysis that incorporates steel-concrete interface as well as material nonlinearities of concrete and steel were performed to predict the experimental results.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.1-14
• /
• 2022

To review the appropriateness of current regulations on the simple explosive storage facility, the effects of internal explosion on the structural stability of the standard storage facility were analyzed by means of both FEM analyses and field experiments. As a result, it was found that the explosion-proof performance of the existing storage structure was not sufficient for 15 kg of emulsion-type explosive. Thus, an alternative method of splitting explosives was tested by conducting sympathetic detonation experiments. This method worked properly as expected, and the proper amount of splitted explosive was determined according to the test results. In addition, a storage structure with open ceiling was found to be very effective because explosion pressure was released so rapidly that the damage of the facility could be reduced significantly. Hence, such a structural pattern was proposed as a new design scheme for simple explosive storage facility.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.103-113
• /
• 2019

The purpose of this study is to recognize the importance of sustaining the coal industry in spite of the declaration of new climate change regime. Due to the importance to have the ability to control the supply and demand for energy source, this study will present the ground supporting the need to save some fixed amount of coal to carry out this task. The relative quantity of fossil fuel like coal and oil consumed as an energy source is reduced due to the increasing portion of renewable energy sources. Nevertheless, we can verify the fact that the position as a main energy source in demand for and supply of electric power is still valid. And the optimal amount of coal storage is estimated through the average annual amount of demand derived from preceding studies. In this context, it is very urgent problem to maintain the coal industry as a industrial policy for the sustainable national economic growth through the coal storage policy and to determine the optimal amount of annual storage.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• The Korean Journal of Pesticide Science
• /
• v.5 no.3
• /
• pp.36-40
• /
• 2001

A series of new 2-N-benzyl-5-phenoxy-3-isothiazolone derivatives were synthesized and their in vitro antifungal activities against resistant Phytophthora capsici (RPC) & sensitive Phytophthora capsici (SPC) with metalaxyl fungicide have been measured. In addition, influence of substituted 5-phenoxy group on the -antifungal activities ($pI_{50}$) and the reactivity of substrates were investigated. From the results, reactivity of none substituted substrate showed tendency displaying orbital-controlled reaction. The substituents on the 5-phenoxy ring showed selective fungicidal activity between SPC and RPC. Especially, the 4-fluoro substituent, 6 in the RPC and 4-nitro substituent, 3 in SPC exhibited strongly selective antifungal activity among them. The activities on the SPC would depend largely on the optimal molar refractivity ($MR_{(opt.)}=7.37cm^3/mol$) whereas the activities on the RPC would depend largely on the optimal highest occupied molecular orbital energy ($HOMO_{(opt.)}=-9.2137e.v.$) and weak electron donating (${\sigma}<0$) group. And Free-Wilson analyses revealed that the antifungal activity against RPC depends on the methoxy and bromo-substituent and all of the substituents contribute to antifungal activities against SPC.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.418-425
• /
• 2015

Anaerobic Filters (AF) packed with porous ceramic floating media were operated at different operational conditions to identify the feasibility of the renewable bioenergy, methane production from swine wastewater and to verify the suitability of effluent from anaerobic filters for the subsequent biological nitrogen and phosphorus removal. Stepwise increase in organic loading rates (OLRs) or decrease in hydraulic retention times (HRTs) with influent TCOD concentration of 14,000 mg/L were utilized at mesophilic temperature. The maximum methane productivity of 1.74 volume of $CH_4$ per volume of reactor per day (v/v-d) was achieved at an hydraulic retention time (HRT) of 0.5 day (OLR 28 g TVS/L-d). Based on the biogas production, the highest total volatile solids (TVS) removal efficiency of 63% was obtained at an HRT of 3 days (OLR 4.67 g TVS/L-d), however based on the result from the effluent total chemical oxygen demand (TCOD) analysis, the highest TCOD removal efficiency of 75% was achieved. The effluent alkalinity concentration over the range of 2,050~2,980 mg/L as $CaCO_3$ at all operational conditions, could compensate the alkalinity destruction caused by nitrification. The effluent from the anaerobic filter operated under the HRT of 2 days showed the COD/TKN ratio of 15~35 and COD/TP ratio of 38~56. Therefore effluent C/N/P ratio is able to satisfy the optimum COD/TKN ratio of greater than 8.0 and COD/TP ratio of 33 for the subsequent biological nutrient removal.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.30-30
• /
• 2015

가전 전자 제품의 대형화 추세와 함께 사용 금형 역시 정밀대형화가 추진되고 있다. 금형의 대형화로 인해 금형표면에 대한 경화 및 내마모 표면처리에 대한 중요성이 더욱 증대되고 있는 상황인 바, 본 연구에서는 고밀도 이온에 의한 플라즈마 질화처리 기술을 활용하여 금형 사용에 있어 충분한 내구성의 확보와 열 변형 최소화, 후 가공비용의 절감, 기타 금형용 상용화 질화처리 전반에 대한 연구를 진행하였다. 그 결과 금형 소재의 저변형 처리를 위한 적정 에너지 조건, 소형 금형 부품의 고품위 처리를 위한 저비용 공정 기술, 금형 생산 상용화 효율 향상을 위한 가열 및 냉각 공정 개선 성과를 확보할 수 있었다.

• Journal of Nutrition and Health
• /
• v.48 no.1
• /
• pp.46-57
• /
• 2015

Purpose: The aim of this study was to determine an appropriate energy level of breakfast with less risk of chronic disease for Korean adults. Methods: Using data from the 2007~2009 Korean National Health & Nutrition Examination Survey, from a total of 12,238 adults aged 19~64, the final 7,769 subjects were analyzed except subjects who were undergoing treatment for cancer or metabolic disorder. According to the percent of breakfast energy intake versus their estimated energy requirement (EER), the subjects were divided into four groups: < 10% (very low, VL), 10~20% (low, L), 20~30% (moderate, M), ${\geq}30%$ (sufficient, S). All data were analyzed on the metabolic risk and nutritional state after application of weighted value and adjustment of sex, age, residential area, income, education, job or jobless, and energy intake using a general linear model or logistic regression. Results: The subjects of group S were 16.9% of total subjects, group M 39.2%, group L 37.6%, and group VL 6.3%. The VL group included more male subjects, younger-aged (19 to 40 years), urban residents, higher income, higher education, and fewer breakfasts eaters together with family members. Among the 4 groups, the VL group showed the highest waist circumference, while the S group showed the lowest waist circumference, body mass index, and serum total cholesterol. The groups of VL and L with lower intake of breakfast energy showed high percent of energy from protein and fat, and low percent of energy from carbohydrate. With the increase of breakfast energy level, intake of energy, most nutrients and food groups increased, and the percentage of subjects consuming nutrients below EAR decreased. The VL group showed relatively higher intake of snacks, sugar, meat and eggs, oil, and seasonings, and the lowest intake of vegetable. Risk of obesity by waist circumference was highest in the VL group by 1.90 times of the S group and the same trend was shown in obesity by BMI. Risk of dyslipidemia by serum total cholesterol was 1.84 times higher in the VL group compared to the S group. Risk of diabetes by Glu-FBS (fasting blood sugar) was 1.57 times higher in the VL group compared to the S group. Conclusion: The results indicate that higher breakfast energy level is positively related to lower metabolic risk and more desirable nutritional state in Korean adults. Therefore, breakfast energy intake more than 30% of their own EER would be highly recommended for Korean adults.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.6-6
• /
• 2019

상수관망시스템은 공급원으로부터 수요처까지의 용수공급을 위해 구축된 관수로 기반의 사회기반시설물로서, 주로 생활 및 산업 용수를 공급하므로 대규모 사회 경제적 피해를 방지하기 위해서는 안정적인 용수공급 능력이 요구된다. 네트워크의 다양한 특성에 의해 표현되는 상수관망시스템의 신뢰도(reliability)는 크게 시스템 내 구성요소의 안정성(mechanical reliability)과 용수공급의 기능적 안정성(hydraulic reliability)으로 구분할 수 있다. 특히, 시스템의 용수공급 안정성에 주목한 수리학적 신뢰도 연구는 많은 연구자들에 의해 지속적으로 수행된 바 있으며, 다양한 평가방법 및 지표들이 제시되어 활용 중에 있다. 기존의 수리학적 신뢰도 지표들은 주로 수요절점(demand node)에서의 공급가능 수량 및 수압을 바탕으로 산정되었다. 그러나, 절점(node)에서의 공급 상태는 결과에 해당하며, 원인 분석을 위해서는 관로(pipe)의 배치 및 규격을 분석해야 하는 번거로움이 존재한다. 이러한 단점을 보완하기 위해, 본 연구에서는 직접 관로(pipe)의 공급 특성을 분석하여 네트워크의 신뢰도를 평가함으로써, 신뢰도 저하의 원인 분석 및 시스템 개선에 효율적으로 활용할 수 있는 신뢰도 지표를 산정하고자 하였다. 본 연구에서는 상수관로 내 수리학적 기울기가 전반적으로 균등할수록 설계 비용대비 공급 신뢰도, 즉 용수공급 효율이 개선되는 특징을 바탕으로, 네트워크 내 총 에너지 손실로부터 각 관로의 길이, 유량 등의 특성을 고려한 등가 수리경사(Equivalent hydraulic gradient)를 유도하여 모든 관로의 적정 수리경사로 제안하였다. 따라서 각 관로의 실제 수리경사를 대상으로 관로별 수리학적 균등성 지수(pipe hydraulic uniformity index)를 산정하였으며, 더 나아가 전체 시스템의 균등성 지수(system hydraulic uniformity index)를 산정하였다. 제안된 신뢰도 지표는 가상의 네트워크에서 지역 내 용수 사용량이 증가하는 등 용수공급 안정성을 저해하는 몇 가지 시나리오를 바탕으로 검증하였으며, 또한 기존 지표들의 신뢰도 평가 결과와 비교, 분석하였다. 본 연구는 향후 네트워크 최적 설계의 목적함수로 활용하거나, 네트워크의 보강계획 수립에 기여할 것으로 기대된다.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.57-67
• /
• 2009

These studies were conducted to investigate the various dietary CP and ME feeding effect on productivity, blood composition and meat quality in cross bred chicks. Seven hundred twenty one day old cross bred chicks (Hanhyup Samho) were alloted to the floor pen for early starting (0~2 weeks), starting (3~5 weeks), growing (6~8 weeks), finishing period (9~10 weeks). Dietary ME and CP were 3,000, 3,100 kcal/kg, and 22% for early starting period, 19, 20, 21% for starting period, 18, 19, 20% for growing period, 17, 18, 19% for finishing period. Weight gain and feed consumption were weekly measured and feed conversion ratios were calculated. Blood and breast meat were collected at the end of experiment. Birds fed ME 3,100 kcal/kg diets improved significantly compared with others for the first two weeks (P<0.05). Feed conversion was statistically improved in CP (22)21% treatment relative to that of CP (22)20% from three to five weeks of age. No difference were found from 6 to 8 weeks of age. Weight gain and feed conversion also improved in ME 3,100 kcal/kg treatments, but feed intake decreased significantly in CP ($22{\times}21{\times}20$)19% treatment for the rest of experimental period (P<0.05). There was interaction between ME and CP for the first five weeks (P<0.05). Blood total protein showed higher in ME 3,100 kcal/kcal treatment than ME 3,000 kcal/kg (P<0.05). There were no differences in albumin, total cholesterol and glucose, but CP ($22{\times}20{\times}19$)18 treatment showed higher glucose than other treatments (P<0.05). Cooking loss, tenderness and water holding capacity were not different. However, pH was dependent on dietary ME, CP and existing the interaction between ME and CP treatments (P<0.05). As the results of this experiment, ME and CP were confirmed the 3,000 kcal/kg, 22% for the first two weeks 3,100 kcal/kg, 21% from three to five weeks of age, 3,100 kcal/kg, 18% for the growing period, 3,100 kcal/kg, 17% for the rest of period. However, further research would be required to confirm more optimum dietary nutrition for cross bred chicks.