• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.626-629
• /
• 2007

국내외에 아직 개발 실적이 없는 발전소의 해수방류수를 이용한 조류식발전시스템의 개발을 위하여, 현재 하동화력발전소 해수방수로를 대상으로 헬리컬 수차를 이용한 조류식발전 시험설비를 제작 완료하고, 성능 시험이 진행 중이며, 본 연구에서는 성능 시험 과정에서 나타난 제반 문제점을 제시하고 그에 대한 원인 및 대책을 분석해 보았다. 본 시험설비는 인공수로에서 수평 배열 헬리컬수차로서 기계장치의 안정성 및 수차의 효율을 평가하고자 하였다. 조류식 시험장치는 배수로의 빠른 유속으로 인하여 시공이 매우 어려웠으며, 인공수로임에도 불구하고 유지관리를 위한 적정 구조 선정이 곤란한 상황이었다. 또한, 헬리컬 수차는 서로 직렬연결되어 운전할 수 있는 장점이 있으나, 본 연구와 같이 다수의 수차가 연결될 경우, 보다 높은 축정렬 정확성, 커플링, 베어링 정밀도 등이 요구되어 효율 감소의 원인이 됨을 확인하였다. 본 장치는 시험용으로서 정밀한 베어링 및 수밀구조, 증속장치를 채택하지 않았으나, 상업용에서는 이를 개선할 필요성이 있다고 판단된다. 또한, 수차의 설치와 유지관리 조건 향상, 수차 통과부의 유황 개선, 수차의 효율 향상을 위하여 조류식 수차에도 유도수로와 casing, draft tube와 같은 Confined flow 구조를 일부 채택할 필요성이 있다고 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.98-107
• /
• 2023

This study presents a well spacing design for coalbed methane(CBM) reservoirs using the experimental results of methane gas adsorption measurement of coal samples obtained from North Kalimantan Island, Indonesia. The gas productivity analysis shows that the cumulative gas production increases as the Langmuir volume increases. This indicates that the maximum gas adsorption directly affects the gas production. In addition, the maximum gas production increases with the increase of reservoir permeability, and the dewatering period is shortened. In particular, the cumulative gas production increases as the production influence area increases. However, when comparing productivity per unit well, the maximum cumulative gas production is found between 2,000 ft of depth and 80-160 acres of the influence area. When reservoir depth and production influence area are considered simultaneously, the results of the appropriate well depth and spacing calculations show that gas productivity is highest between 600-2,000 ft. In this case, it is appropriate to design well spacing in the range of 80-160 acres. Therefore, well spacing design considering coalbed depth in undeveloped CBM reservoirs can be accomplished using gas sorption test results from coal samples.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.417-422
• /
• 2023

In this study, normal saline was diluted with the contrast medium at a certain ratio for the purpose of reducing the image quality poor and side effects caused by the contrast medium during CT examination. At this time, by finding the energy level of DECT that can compensate for the decrease in contrast of the image according to the degree of dilution, the usefulness of applying DECT for compensating the difference in image contrast was investigated through comparative analysis by applying SNR, CNR, and SSIM. As a result, when a dilution ratio of 4 (contrast medium): 6 (normal saline) and the energy level of DECT of 65 keV were applied, the contrast difference was the most similar to that when using the undiluted contrast medium. At this time, SNR was 813.71 ± 37.6, CNR was the highest at 921.87 ± 17.1, and SSIM index was measured at 0.851, which is the most similar to 1. The results of this study are meaningful in providing basic information for finding the appropriate dilution rate and energy level for each examination site through future clinical studies. It is believed that it can be reduced.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.59-71
• /
• 2021

Hybrid hydrothermal carbonization (Hybrid HTC) technology is a proprietary thermochemical process for two or more organic wastes.The reaction time is less than two hours with temperature range 180~250℃ and pressure range 20~40bar. Thanks to accumulation of the carbon of the waste during Hybrid HTC process, the energy value of the solid fuel increases significantly with comparatively low energy consumption. It has also a great volume reduction with odor removal effect so that it is evaluated as the best solid fuel conversion technology for various organic wastes. In this study of the hybrid hydrothermal carbonization, the effect on the calorific value and yield of Cambodian mango waste were evaluated according to changes in temperature and reaction time. Through the study, parameter optimization has been sought with improving energy efficiency of the whole plant. It is decomposed in the Hydro-Carbonation Technology to Generate Gas. At this time, it is possible to develop manufacturing and production technologies such as hydrogen (H₂) and methane (CH₄). Based on the results of the study, a pilot plant (2t/day) has been proposed for future commercialization purpose along cost analysis, mass balance and energy balance calculations.

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.367-373
• /
• 2009

This experiment was conducted to determine optimum dietary levels of dietary energy and protein for laying performance and egg quality in organic laying hens. In a $2{\times}3$ factorial arrangement, 360 Hy-Line pullets (21 wk of age) were randomly assigned to experimental diets with 2,800, 3,080, and 3,360 kcal of ME/kg of diet, each containing 16 and 18% CP, respectively. Each dietary treatment was replicated 4 times, and feed and water were provided ad libitum. Experimental birds were raised in floor and received 14h of light throughout 52 weeks of experimental period. The birds were observed for feed consumption, egg production, egg weight, egg mass, feed conversion ratio, Haugh unit, shell thickness, and shell color at 30, 50, and 70 wk of age. Egg production, egg weight, and egg mass were higher (P<0.05) in hens receiving diets with 2,800 kcal/kg of ME/kg of feed than those fed diets containing 3,080 and 3,360 kcal of ME/kg of diets. Eggshell breaking strengths were not significantly different among the dietary ME and CP concentrations. Eggshell thickness was higher (P<0.05) in hens receiving diets with 3,360 kcal of ME/kg of feed than those fed diets containing 2,800 and 3,080 kcal of ME/kg of diets at 50 and 70 week. With increasing in dietary energy levels, the concentrations of blood total cholesterol were also significantly increased. Overall, the laying hens fed organic diet of 2,800 kcal ME/kg and 16% CP showed superior egg production than those of other dietary regimens.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.323-324
• /
• 2011

유틸리티에서 검침은 고객에게 제공한 에너지의 사용량을 계량하고 요금을 부과하기 위한 중요한 정보이며 검침방법이 종래의 인력검침에서 자동원격검침으로 발전함에 따라 계량기에서 검침서버로 전송되는 통신망에서 보안관리가 중요시 되고 있다. 보안의 방법은 중간의 통신망 형태, 통신 매체, 전송되는 데이터의 구조 등을 반영하여 적정한 보안방법이 적용되어야 하겠지만 본 논문에서는 현재 전기검침에 적용되는 국제규격 DLMS/COSEM데이터의 구조를 분석하고 기밀성을 보장하기 위한 방안을 제시하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.91-100
• /
• 2015

An increase in energy such as natural gas, coal, oil, has occurred to a large amounts of environment impact emissions, it is necessary to reduce in the construction industry for the energy consumption. To encourage remodeling project in developed countries of the majority, on the basis of this, remodeling project in the construction industry has grown to a large amount. Results of analysis of the research related to the advanced remodeling, analysis of the economic validity in accordance with the production and process and building elapsed years of selection alternative of remodeling there has been a problem that has not been properly reflected. In this study, a decision support model that can simultaneously choose the most cost-effective and energy-efficiency alternative. Developed process model, generates a "Remodeling Solution" that combines the renewable energy equipment and envelope system, energy performance evaluation of the application of international standards(ISO-13790, DIN V 18599), perform the economic evaluation through LCCA(Life Cycle Cost Analysis) technique, circulated evaluation and configured to output the optimal Remodeling Solution. The results of applying the model developed in the case, it was confirmed that it is possible to select a choice of cost-effective energy-saving alternative. Then, developed model through this study, it is expected to be able to help highly effective remodeling alternative to selecting by decision-makers.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.581_582
• /
• 2009

최근 국내외적으로 스마트그리드, 마이크로그리드와 같은 곧 다가올 미래형전력계통망에 대한 기반기술연구가 매우 중요하다. 이는 전력IT기술과도 깊은 관련성이 있는 것으로써 그 성공여부는 전력IT기술과 협조를 맺으면서 여하히 기술적으로 이를 실현화(Implementation)하는냐에 달려있다고 하겠다. 본 연구에서는 최근 국내외적으로 급부상하고 있는 스마트그리드 마이크로그리드와 같은 곧 다가올 미래형전력계통망에 대비하고 나아가 $CO_2$ 감축의무와 맞물려 있는 분산형 신재생에너지발전원의 계통병입이 전력에너지의 적정공급신뢰도에 미치는 영향을 정량적으로 분석할 수 있는 웹기반 확률론적인 신뢰도 및 발전비용모의를 인터넷의 사용이 가능한 곳이면 어느 장소 및 시간대(Any where & any time)에서나 실시할 수 있는 시스템인 가칭, WPRASS V1.0(Web based Probabilistic Reliability Assessment Simulation System V1.0)을 성공적으로 구축하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.52-58
• /
• 2009

In this paper, we propose a probability method to determine minimum capacity of energy storage system(ESS) for Micro-grid Because of high capital cost of ESS, It's very important to determine optimal capacity of ESS and for stable operation of Micro grid(MG), we should determine minimum capacity of ESS. The proposed method has abilities to consider forced outage rate of generators and intermittent of non-dispatchable generators and minimum capacity make MG keep energy balancing by oneself.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.145-151
• /
• 1997

The R&D investment of power industry has significant influences on the social welfare as well as national economy. It is necessary to analyze how efficient the R&D investment has been performed. The objective of this study is to verify the efficiency of the R&D investment in the domestic power industry. A formula was introduced to by calculate the appropriate amount of R&D investment of monopolistic industry under the regulations which are determined by the proportion of R&D elasticity and price elasticity. It has resulted that there would be no economy of scale as the sales of electricity increases at the same rate of the increasing cost. The R&D investment in the present electricity industry has been performed inefficiently by showing the negative impact on price-cost margin of the intensity of R&D investment, which is the extent of R&D investment to reinforce economy of scale.