• Information and Communications Magazine
• /
• v.30 no.10
• /
• pp.38-45
• /
• 2013

2009년 초반 중국은 물량중심으로 조선분야 수주잔량 부분에서 한국을 추월하였으나, 현재 한국은 조선강국으로서의 위치를 고수하기 위해 IT조선 융합기술 개발을 통하여 디지털선박과 해양플랜트 등 고부가가치 선박 제품을 제조하고 있으며, 이러한 선박 제조 과정에서 에너지 및 인력 절감을 통해 고효율화, 안전성 제고 등 신뢰도 향상 또한 추진하고 있다. 최근 국내에 수주되고 있는 LNG선, 호화여객선, 석유시추선 등의 쉐이빙선과 같은 고부가가치 선박의 경우 국산화율이 60%가 채 되지 않는 현 상황에서 선박 관련 IT 기술 확보는 선박 건조 국산화 비율을 높이고 조선산업 수주 경쟁력을 높이는 중요한 관건이 될 것으로 예상한다. 본고에서는 세계 1위를 지키고 있는 조선산업의 질적성장을 위한 IT+조선 기술현황과 전망에 대해 기술한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.62-66
• /
• 2008

In this paper we have proposed a power aware location based routing protocol for wireless ad hoc network. The existing greedy perimeter stateless routing (GPSR) has some problems which are certain node overloaded and void situation. The proposed power aware greedy perimeter stateless routing (PAGPSR) protocol gives a solution for these problems in GPSR. PAGPSR uses power aware and geographically informed neighbor selection to route a packet towards the destination. It also gives a solution for the fundamental problem in geographical routing called communication void. It considers residual energy of battery and distance to the destination for the next hope node selection. When it encounters a void it starts limited-flooding to select next hop node. To evaluate the performance of our protocol we simulated PAGPSR in ns-2. Our simulation results show that our protocol achieves longer network lifetime compared with greedy perimeter stateless routing (GPSR).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.233-241
• /
• 2013

One fundamental issue in ad hoc networks is the alternative node election problem, which reflects how well a sensor network is monitored or tracked by sensors. In this paper, we proposed EEAP(Energy-Efficient Alternative Paths). This is a method of selecting an alternative node for path routing management. When some node disconnection on the path routing, using pre-selected backup node provides immediately recover the path recovery. When selecting an alternative node of Step-Parents head node on the path management, the node's energy level and distance information are cared in context-awareness. This is not only increased the system's capacity cost effectively, but also reduce transmission power entire nodes consume energy. As a result, each node could efficiently management and improves the life time for mobile host and extends system coverage.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.33-39
• /
• 2010

In this paper, a data dissemination protocol that transmits data collected for Wireless Sensor Networks (WSNs) is newly proposed, and the proposed proactive protocol takes into account energy consumption minimized and delay time disseminated. The well-known SPMS (Shortest Path Mined SPIN) forms the shortest path-based routing table obtained by Bellman Ford Algorithm (BFA) and disseminates data using a multi-hop path in order to minimize energy consumption. The mentioned properties of SPMS cause memory burden to create and maintain the routing tables. In addition, whenever BFA is executed, it is necessary to suffer from the energy consumption and traffic occurred. In order to overcome this problem, a proactive dissemination protocol using Residual Energy and Signal Strength, called RESS, is proposed in this paper. Simulation results show that RESS outperforms SPMS up to 84% in terms of the number of traffic messages and the transmitted delay time of RESS is similar to that of SPMS using the shortest path.

• Bulletin of Food Technology
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2012

한국 식품화의 위상은 구이류 및 전골류 조리시 발생하는 냄새, 연기, 기름 튐 등의 문제로 인해 낮게 평가 되고 있는 실정이다. 현재 사용하고 있는 불판 및 가열원료가 다양하여 맛의 균일화가 어렵고 사용 후 세척처리가 번거로운데다 환경오염까지 발생시킨다. 구이 및 전골에 소비되는 에너지가 잔량을 모두 섭취할 동안 연속적으로 공급하므로 에너지 소비 및 내부 공기조건이 열악한데 반해 연기 및 냄새와 관련된 제품의 개발과 생산에 참여하는 업체는 증가하고 있다. 하지만 기술력 및 자본력이 미미한 수준에 있어 많은 기술적 측면의 보완이 요구된다. 또 소스, 양념, 부재료 등의 가공처리를 외국인의 식문화에 적합하도록 맛, 향, 관능의 관점에서 규격화 및 현지화도 요구되며, 공급되는 원재료의 고기종류, 규격, 등급 등의 조건들이 국내 관능뿐만 아니라 외국인의 관능적인 관점에서 표준화가 시급하다. 주한 외국인을 대상으로 한 설문에서 59%가 한국음식의 세계화가 가능하고 89.9%가 한식메뉴를 소개할 의사가 있는 것으로 조사되었다. 이는 외국인 소비자의 인지도에서 불고기와 갈비 등의 구이류가 다른 한식보다 선호도가 증가하는 것이기 때문인 것으로 분석된다. 2009년 농림수산식품부가 '한식 세계화 프로젝트'를 선포하여 1만여 곳의 해외식당을 2017년까지 4만 곳으로 증가할 예정이다. 따라서 한식문화의 표준화를 위한 용어 재료 기구 단위 등의 표준화 기반개발을 바탕으로 조리 및 식문화의 표준화가 요구되고 있다. 우리나라는 구이전문점들이 일반주거 및 아파트 단지에 위치하고 있어 연기와 냄새에 대한 민원 및 분쟁이 발생되고 있다. 이에 집진, 제연 설비의 설치비용이 많이 소요되고 있으며 대부분의 구이설비가 수입제품으로 규모가 매우 크다. 일본의 경우 2002년도부터 음식점에서 발생하는 연기에 관한 규제를 법제화하였다. 위의 기술적, 경제 산업적, 사회 문화적 측면의 필요성을 바탕으로 본 연구는 연기 음식 냄새 저감 성능이 뛰어난 친환경 저에너지의 가열조리 기구 개발 및 국내외 현장적용 산업화 모델 구축을 통해 한식당 시설 개선 및 고급화를 유도하고 세계시장에서의 한식문화 경쟁력을 확보코자 한식문화 경쟁력 확보와 경제, 문화, 산업적 성공 비즈니스 모델을 제시하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.657-658
• /
• 2015

In an wireless sensor network, energy efficient routing protocol is important for multi-hop transmission because senor nodes are powered by battery. In multi-hop transmission, specifice nodes are used and the battery power becomes low, it induce the asymetric remaining power among the nodes and makes the network lifetime reduced. In this paper, we propose a power-aware routing protocol which determines the routing path considering the remaining power of the nodes. Simulation results shows that the proposed routing scheme minimize the transmission delay and increase the network lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.153-158
• /
• 2017

Rendezvous point is used to gather the data from sensor nodes and send to sink node efficiently in selected area. It incurs a unbalanced energy consumption nearby the rendezvous point which can shorten the network life time shortly. Thus, it is very important to select the rendezvous point effectively among all sensors in order to not drain the battery of a sensor node in construction sites. In this paper, we propose a rendezvous point replacement mechanism which considers remaining energy of nodes to prolong the network lifetime. Also, for shortening the distance of drone at the same time, it increases the probability of the near-by drone node becoming rendezvous point. The simulation results show that the proposed scheme can significantly improve the network lifetime and the flight distance compared with the existing LEACH, L-LEACH algorithm.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.599-612
• /
• 2015

The development of renewable energy technologies that can replace fossil fuels is environmentally important; however, such technologies must be economically feasible. Economic analyses are important for assessing new projects such as geothermal heating-cooling systems, given their large initial costs. This study analyzed the economics and carbon dioxide emissions of: a SCW (standing column well), a vertical closed loop boiler, a gas boiler, and an oil boiler. Life cycle cost analysis showed that the SCW geothermal heating-cooling system had the highest economic feasibility, as it had the highest cost saving and also the lowest carbon dioxide emissions. Overall, it appears that geothermal systems can save money when applied to large-scale controlled agriculture complexes and reclaimed land.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.1
• /
• pp.17-25
• /
• 2023

As the range of use of urban unmanned aerial vehicles (UAV) expands, it is necessary to operate UAVs efficiently because of its limited battery capacity. For this, it is required to find the optimal flight profile with various simulations. Therefore, it is important to predict the power and energy consumption of the UAV battery. In this paper, we analyzed the relationship between the speed and acceleration of the UAV and power consumption during the flight. Then, we derived a linear model, which is easily utilized. In addition, we also derived an accurate power consumption model based on deep neural network learning. To find the efficient model, we used learning data as 1) the GPS 3-axis velocity and acceleration data, 2) the IMU 3-axis velocity only, and 3) the IMU 3-axis velocity and acceleration data. The final model shows 5.86% error rate for power consumption and 1.50% error rate for the cumulative energy consumption.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.41-49
• /
• 2022

The Internet Engineering Task Force (IETF) has standardized RPL (IPv6 Routing Protocol for Low-power Lossy Network) as a routing protocol for Low Power and Lossy Networks (LLNs), a low power loss network environment. RPL creates a route through an Objective Function (OF) suitable for the service required by LLNs and builds a Destination Oriented Directed Acyclic Graph (DODAG). Existing studies check the residual energy of each node and select a parent with the highest residual energy to build a DODAG, but the energy exhaustion of the parent can not avoid the network disconnection of the children nodes. Therefore, this paper proposes EC-RPL (Enhanced Connectivity-RPL), in which ta node leaves DODAG in advance when the remaining energy of the node falls below the specified energy threshold. The proposed protocol is implemented in Contiki, an open-source IoT operating system, and its performance is evaluated in Cooja simulator, and the number of control messages is compared using Foren6. Experimental results show that EC-RPL has 6.9% lower latency and 5.8% fewer control messages than the existing RPL, and the packet delivery rate is 1.7% higher.