• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.263-271
• /
• 2016

The market size of the bone absorptiometric X-ray system and the number of its approval by Ministry of Food and Drug Safety (MFDS) has annually increased, with a trend of increasing aging population and osteoporosis patients. For approval of manufactured or imported medical devices in Republic of Korea, it is required to submit its technical document. Therefore, it is need to develop the technical document guideline for the bone absorptiometric X-ray system for manufacturers, importers and reviewers. First of all, the technical documents which were already approved were examined and analyzed through MFDS approval administration system. Second, safety and performance test standards and methods that match international standards were drawn after conducting survey of the market status and the technology development trend for it, with examination and analysis of applicable domestic and overseas standards. Third, by operating industry-research-government cooperation, the guideline draft on writing technical document for the bone absorptiometric X-ray system was discussed, collecting their opinion. As a result, it is suitable to international and domestic condition, includes test evaluation methods and offer various information with appropriate examples to civil petitioner, when they write the technical documents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.92-104
• /
• 2017

Previous management for speed in road traffic system was aimed only to the improvement of mobility and safety. However, consideration for the aspect of environment and energy consumption efficiency was valued less than the former ones. Nevertheless, economical damage scope caused by climate change has been increasing and it is estimated that environmental value will be increased because of the change of external circumstances. In addition, policy for reducing carbon emission in transportation system was assessed as insufficient in improving the condition of traffic road since it only focused on the transition of private vehicle into public transportation and development of eco-friendly car. Now it is the time to prepare for the adaptation strategy and precaution for the increased number of private vehicle in Korea. For this, paradigm shift in traffic operation which includes the policy not only about the mobility but also about caring environment would be needed. It is needed to be able to monitor the actual amount of greenhouse gas in real time to reduce the amount of emitted greenhouse gas in the aspect of traffic management. In this research, a methodology which can build on-line greenhouse gas emission monitoring system by using real time traffic data and predicting the circumstance in next 5 minutes was suggested.

• Tunnel and Underground Space
• /
• v.9 no.3
• /
• pp.185-193
• /
• 1999

This paper presents results of dynamic analysis for a bridge in intersection part of two tunnels subjected to moving vehicle load. Since such a bridge system is very unusual due to the fact that it is located in tunnel, the dynamic characteristics of the structure can not be assumed as conventional one. The structure investigated in this study it a reinforced concrete bridge in the intersection part of Namsan Tunnel-1 and Tunnel-2 in Seoul. It is supported by temporary steel structure which shall be constructed during the period of replacing lining in Tunnel-2. Dynamic analysis was carried out for the system using a finite element model constructed by general purpose FE program SAP2000. For this purpose, the structure, lining of tunnels, and surrounding rock were represented by finite elements, while the rock region it truncated and on its outer boundary viscous dampers were placed to simulate radiation of elastic waves generated tunnels. Several types of vehicle with various driving velocities were considered in this analysis. The FE model including vehicle loadings was verified by comparing calculated peak particle velocity with the measured one. From the analysis, the impart factor for the bridge was estimated as 0.21, which indicates that the use of upper bound for the impact factor in design code is reasonable for this kind of bridge system.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.467-476
• /
• 2016

For the connections between modular units in modular buildings, the bolted joints with connector plates are used commonly. The strength of structure is determined by the weakest part of structure and the connections may be weaker than the members being joined. Therefore, to check the safety of modular building, the structural performance of connections between modular units as well as that of beam-to-column connections should be evaluated. In this study, the behavior of module to module connection with straight and cross shaped connector plates is investigated by lateral cyclic tests according to KBC2009 0722.2.4 which shall be conducted by controlling the story drift angle in the width and the longitudinal direction respectively. All of test results generally show the stable ductile behavior up to 0.04rad drift levels and the tests in longitudinal direction show a superior energy dissipation per cycle in each of the load steps. However, the straight shaped connector plates have the degradation of stiffness with cyclic loading and the larger drift angle of column than the cross shaped connector plates.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.342-348
• /
• 2009

Zn/Air secondary batteries are high energy density type and environment-friendly. Also, they have safer properties than batteries of other type by low manufacturing cost and using the electrolyte solution. But, they have a weak concerning large output discharge. Oxygen evolution reaction(OER) and oxgen reduction reaction(ORR) in aqueous solution make a result of a decrease of cell efficiency and life span. Therefore, to minimize the voltage drop from between OCV and charge/discharge voltage is key point. The problem should be solved through developing catalysts of high efficiency. In this study, we synthesized $Pr_{1-x}(Sr,\;Ca)_x\;CoO_3$ powders by citric method and then measured physical characteristics of each powder by XRD, SEM, TGA etc. We examined its electrochemical properties by the cathodic polarization, anodic polarization and cyclic voltammogram. We achieved results that new catalysts showed better performances than existing $La_{1-x}Sr_xCoO_3$, $La_{1-x}Ca_xCoO_3$, ect. catalysts prepared in our lab.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.243-253
• /
• 2004

최근의 레이저 기술의 발전은 치의화영역에서 많은 가능성을 제시해 주고 있으며, 레이저를 이용한 외과적 치료의 기전과 안전성은 많은 분야에서 입증되어 있다. 근래에는 치주학적 분야에도 레이저를 적용하려는 노력이 계속되어 왔으며, 치석의 제거나 치근면의 세균제거 등에서 효과를 제시한 연구들이 있었다. 본 연구의 목적은 $CO_2$ 레이저를 통상적 치은연하소파술과 병용하였을때의 임상적 효과를 임상 지수의 측정을 통하여 평가하는 것이다. 만성 중둥도-고도의 치주염으로 진단된 12명의 환자가 본 임상연구에 포함되었다. 한 환자에서 각각 2부위의 사분악을 선택하여 임의로 2가지 치료군에 다음과 같이 나누어 포함시켰다: 1) 치은연하 소파술만을 적용한 사분악을 대조군 2) 치은연하 소파술과 0.8W의 에너지 수준을 갖는 $CO_2$ 레이저를 병용하여 적용한 사분악을 Laser 군으로 포함하였다. 치주낭 탐침 깊이, 임상 부착 수준, 치은 퇴축 및 탐침시 출혈풍의 임상지수를 치료전과 술후 각각 1, 3, 6개월 경과시에 측정하여 다음과 같은 결과를 얻었다. 치주낭 탐침 깊이, 임상 부착 수준, 치은 퇴축 및 탐침시 출혈 등의 모든 측정한 임상지수에서 치료전 ${\cdot}$ 후를 비교하였을 때 통계적으로 유의한 개선을 보였다. 그러나 실험군과 대조군간의 비교에서는 치주낭 탐침 깊이, 임상 부착 수준에서는 통계적으로 유의한 차이를 보이지 않았다. 탐침시 출혈은 술후 6개월시에 Laser군에서 대조군에 비하여 통계적으로 유의성있는 차이를 보이며 감소하였다(p<0.05). 결론적으로 $CO_2$ laser를 비외과적 치주 치료에 부가적으로 적용하였을 때 염증 감소에 기여할 가능성이 있을 것으로 사료된다.

• Journal of Radiation Protection and Research
• /
• v.4 no.1
• /
• pp.14-20
• /
• 1979

For accurate and easily shielding irregular shaped organ, its minimized penumbra region and a low melting point alloy 'Lead Y' and synchronizing instrument have been developed. The 'Lead Y' is the quaternary eutectic alloy and it is composed of Lead 30.0% Tin 11.5% Bismuth 48 5% Cadmium 10.0% The density of its at $22^{\circ}C$ is $9.8g/cm^3$ and the melting temperature has $40^{\circ}C\;to\;68^{\circ}C$. The thickness of 'Lead Y' for perfect shielding of Co-60 gamma ray and LINAC 10MeV x-ray is 6cm and 7cm respectively. The 'Lead Y' shielding block is casted directly on the styrofoam from which is cut with hot wire of synchronizer device. The special features and advantages of the Lead Y shielding block could be summarized as follows; 1. The shielding block for radiotherapy is rapidly processed only with boiling water and styrofoam. 2. It is not injure one's health and not danger of a fire, because of not generating of any metals vapor and evil smelling. 3. It is very effective to minimize secondary penumbra for the protection of healthy tissue from unnecessary ionizing radiation regardless of the magnification source to skin distance. 4. The HVL of the Lead Y is 1.2cm for Co-60 gamma ray and it's shielding effect is almost same as the pure lead block. 5. The hardness of Lead Y is 1.5 times higher than lead block. 6. It's reavailability is higher than lead block and then one block of Lead Y is reavailable about 30 to 40 times. 7. It is usefull for shielding of x-ray, gamma ray, beta-ray, electron and neutron radiation. 8. The materials for Lead Y are easy to acquire with reasonable price and tractable.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.295-300
• /
• 2015

There are various type of particle accelerators such as Kyoungju 100-MeV proton beam accelerator in Korea. And Korea plans to build large particle accelerator such as heavy ion accelerator and 4th generation light source facility. The accelerated high energy particles of these facility produce 2nd neutron after nuclear reaction with target materials. And then these 2nd neutron activate structural materials and surrounding environment. Accordingly, it is important to consider the activation and shielding calculation on design of facility for safety operation. In this study, we tried to calculate and compare the neutron flux from the interaction $^{la}150$ beam with target material(Cu) according to thickness of iron and concrete shielding material by MCNPX 2.7 with nuclear library JENDL/HE 07and la150. To verify the properties of nuclear library, we compared computational results with experimental value. These results can be used for dose evaluation technology in planning of the shielding of large particle accelerator.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.483-491
• /
• 2017

This study investigates the perception of the general public through analysis of various potential risk factors reflecting nuclear power generation and nuclear power (radiation) and risks. A total of 293 copies of the data were collected from various strata in Busan. As a result, among the potential factors in everyday life, there was a high awareness of the risk to the fire. Next, the perception of risk for radiation terror and nuclear (nuclear) energy was relatively high compared to other risk factors. In the analysis according to age, educational background, and political ideological tendency, the results were contradictory to the necessity, risk and safety of nuclear power generation. The potential risk factors and the perception of nuclear power according to the tendency of political ideology were analyzed to be positive recognition of conservative ideology and negative recognition of progressive group. In other words, the perception of nuclear power was analyzed differently according to the tendency of political ideology. Therefore, it should be decided to reflect the opinions of experts and various opinions of the general public in the setting of nuclear radiation (radiation), it is believed that ordinary people need to take flexible action without having a vague sense of anxiety about various potential risks and nuclear power (radiation) based on objective and scientific grounds.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.85-89
• /
• 2014

TTI is a small label of which the color changes by time-temperature history during food storage. The food shelf life (SL) was compared with that of TTI, the time for TTI to reach the end-point of its color change, for the various discrepancies in two Arrhenius activation energies (Ea), an important parameter of temperature dependence. The SL of TTI and food were mathematically simulated, based on zero-order and first-order kinetics, respectively. In the case Ea of food was smaller than that of TTI, the SL of food was larger than that of TTI, meaning TTI reaches the end-point of color change earlier even though food is still fresh. In the case of Ea of food > Ea of TTI, the food reaches the SL earlier than the TTI. In addition, the magnitude of ${\Delta}Ea$ between food and TTI led to the bigger ${\Delta}SL$. To be safe, $SL_{Food}$ > $SL_{TTI}$ would be practical although $SL_{Food}{\fallingdotseq}SL_{TTI}$ is ideal.