• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.

• Journal of Environmental Policy
• /
• v.7 no.3
• /
• pp.89-120
• /
• 2008

With petroleum being a major source of energy in Korea, the quantity of petroleum transported via ocean routes is on its way up due to increased consumption. Due to the increase, more than 300 cases of pollution caused by petroleum occur annually. Moreover, the number of oil-spill accidents is also on the rise. Causes of such accidents, not including the disposal of waste oil on purpose, turn out to be human error during navigation or defects in the vessels, showing that most accidents are caused by humans. Therefore, to prevent future oil spills, it is imperative that navigation efficiency be enhanced by improving the quality of navigators and replacing old vessels with newer ones. Nevertheless, such improvements cannot occur overnight, so long- and mid-term efforts should be made to achieve it institutionally. As large-scale oil-spill accidents can happen at anytime along the coastal waters of Korea, it is necessary to set-up institutional devices which go beyond the compensation limit of 92FC. The current special law regarding this issue has its limits in that it prescribes compensation be supplemented solely by national taxes. Therefore, the setting-up of a new 'national fund' is recommended for consideration rather than to subscribe to the '2003 Convention for the Supplementary Fund'. It is strongly suggested that a National fund be created from fees collected from oil companies based on the risks involved in oil transportation and according to the profiteers pay principle. In addition, a public fund should be created to handle general environmental damage, such as the large-scale destruction of the ecosystem, which is distinct from the economic damage that harms the local people. The posterior responses to the large-scale oil spill have always been unsatisfactory because of the symbolic nature of the disasters included in such accidents. Oil-spills can be prevented in advance, because they are caused by human beings. But once they occur, they inflict long-term damage to both human life and the natural ecosystem. Therefore, the best response to future oil-spills is to work to prevent them.

• The Korean Journal of Ecology
• /
• v.24 no.3
• /
• pp.157-168
• /
• 2001

Herbicides have been used to control weeds for decades. If detoxification upon exposure to herbicides requires considerable amounts of energy, it could affect the pattern of resource allocation to growth and reproduction of crops. We examined the effects of three levels of a herbicide (Control, Low, and High) on germination, growth and reproductive characters of Glycine max treated twice, i.e., before and after seed germination. Since flowering time of G. max was separated into two groups, flowering time was also considered as a variable in this study. The rate of seed germination tended to be higher at the low level of herbicide compared to other levels. Chlorosis and shape variation of leaves were apparent after the second herbicide treatment, but completely disappeared after six weeks of treatment. The herbicide effects on growth characters were somewhat different between early and late flowering plants, but plants treated with both low and high levels of herbicide reduced their growth compared to those in the control group regardless of flowering time. Plants at the high level of herbicide exhibited the highest growth rate later in the season, suggesting that plants compensated to some extent for reduced growth. However, growth reduction among plants at the high level of herbicide was persistent until the end of growing season. Among plants flowered late in the season, plants in the control level bore a higher number of nodules per plant than those in other levels; such a pattern did not exist among plants flowered early in the season. Plants treated with low and high levels of herbicide produced a lower number of flowers than those in the control. Thus, the herbicide examined affected not only the growth and reproductive characters of non-target crops but also the development and growth of root nodules.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.182-187
• /
• 2013

In closed plant production system like plant factory, changes in environmental factors should be identified for conducting efficient environmental control as well as predicting energy consumption. Since high relative humidity (RH) is essential for crop production in the plant factory, transpiration is closely related with RH and should be quantified. In this study, four varieties of lettuces (Lactuca sativa L.) were grown in a plant factory, and the leaf areas and transpiration rates of the plants according to DAT (day after transplanting) were measured. The coefficients of the simplified Penman-Monteith equation were calibrated in order to calculate the transpiration rate in the plant factory and the total amount of transpiration during cultivation period was predicted by simulation. The following model was used: $E_d=a*(1-e^{-k*LAI})*RAD_{in}+b*LAI*VPD_d$ (at daytime) and $E_n=b*LAI*VPD_n$ (at nighttime) for estimating transpiration of the lettuce in the plant factory. Leaf area and transpiration rate increased with DAT as exponential growth. Proportional relationship was obtained between leaf area and transpiration rate. Total amounts of transpiration of lettuces grown in plant factory could be obtained by the models with high $r^2$ values. The results indicated the simplified Penman-Monteith equation could be used to predict water requirements as well as heating and cooling loads required in plant factory system.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2004

Nitrogen ion implantation and ion plating techniques were applied for improvement of the wear resistance of metallic implant materials. In this work, the wear dissolution behaviour of a nitrogen ion implanted super stainless steel (S.S.S, 22Cr-20Ni-6Mo-0.25N) was compared with those of S.S.S, 316L SS and TiN coated 316L SS. The amounts of Cr and Ni ions worn-out from the specimens were Investigated using an electrothermal atomic absorption spectrometry. Furthermore, the Ti(Grade 2) disks were coated with TiN, ZrN and TiCN by use of low temperature arc vapor deposition and the wear resistance of the coating layers was compared with that of titanium. The chemical compositions of the nitrogen ion implanted and nitride coated layers were examined with a scanting auger electron spectroscopy. It wat observed that the metal ions released from the nitrogen ion implanted S.S.S surface were significantly reduced. From the results obtained, it was shown that the nitrogen ion implanted zone obtained with 100 KeV ion energy was easily removed within 200,000 revolutions from a wear dissolution testing under a similar load condition when applied to artificial hip joint. The remarkable improvement in wear resistance weir confirmed by the nitrides coated Ti materials and the wear properties differ greatly according to the chemical composition of the coating layers. for specimens with the same coating thickness of about 3$\mu\textrm{m}$, TiCN coated Ti showed the highest wear resistance. However, after removing the coating layers, the wear rates of all nitrides coated Ti reverted to their normal rates of below 10,000 revolutions from Ti-disk-on-disk wear testing under the same load condition. From the results obtained, it is suggested that the insufficient depth of the 100 Kel N$\^$＋/ ion implanted zone and of the nitrides coated layers of 3$\mu\textrm{m}$ are subject to restriction when used as frictional parts of load bearing implants.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2007

The use of information on natural resources is indispensable to most agricultural activities to avoid disasters, to improve input efficiency, and to increase lam income. Most information is prepared and managed at a spatial scale called the "Hydrologic Unit" (HU), which means watershed or small river basin, because virtually every environmental problem can be handled best within a single HU. South Korea consists of 840 such watersheds and, while other watershed-specific information is routinely managed by government organizations, there are none responsible for agricultural weather and climate. A joint research team of Kyung Hee University and the Agriculture, forestry and Fisheries Information Service has begun a 4-year project funded by the Ministry of Agriculture and forestry to establish a watershed-specific agricultural weather information service based on "high definition" digital climate maps (HD-DCMs) utilizing the state of the art geospatial climatological technology. For example, a daily minimum temperature model simulating the thermodynamic nature of cold air with the aid of raster GIS and microwave temperature profiling will quantify effects of cold air drainage on local temperature. By using these techniques and 30-year (1971-2000) synoptic observations, gridded climate data including temperature, solar irradiance, and precipitation will be prepared for each watershed at a 30m spacing. Together with the climatological normals, there will be 3-hourly near-real time meterological mapping using the Korea Meteorological Administration's digital forecasting products which are prepared at a 5 km by 5 km resolution. Resulting HD-DCM database and operational technology will be transferred to local governments, and they will be responsible for routine operations and applications in their region. This paper describes the project in detail and demonstrates some of the interim results.

• Korean Journal of Environment and Ecology
• /
• v.28 no.6
• /
• pp.657-663
• /
• 2014

This study was conducted to investigate the difference in feeding habits of Red-Tongued Viper Snakes, according to available foods sources and areas. The effects of differences in food sources were found on Red-Tongued Viper Snake inhabited in the Jeju Island and its islet Gapado, from May 2006 to Nov. 2010. The food sources for the Red-Tongued viper snake population in the Jeju Island were found to be as follows: Chinese red-headed centipedes (Scolopendra subspinipes mutilans), Jeju Salamanders (Hynobius quelpaertensis), Japanese tree Frogs (Hyla japonica), Narrow-mouthed Toad (Kaloula borealis), Dybowski's Brown Frogs (Rana dybowskii), Black-spotted Pond Frogs (Rana nigromaculata), Smooth Skinks (Scincella vandenburghi), Asian Keelback Snakes (Amphiesma vibakari), Lesser White-toothed Shrews (Crosidura shantungensis), Hallasan Shrews (Sorex caecutiens hallamontanus), and Jeju Striped Field Mice (Apodemus chejuensis). This implies that Red-Tongued Viper Snakes mainly feed on amphibians, reptiles, and small mammals. Among these, amphibians occupied the highest portion at 55.2% followed by mammals at 20.7%, centipedes at 13.8%, and reptiles at 10.3%. On the contrary, Red-tongued viper snake population in Gapado only feed on Chinese red-headed centipedes and Smooth Skinks (S. vandenburghi). Since only a small amount of nutrient can be obtained from Chinese red-headed centipeds or Smooth Skinks, this feeding habit for Red-tongued viper snake would adversely effect on the growth or regeneration. The reason why Red-Tongued viper snake population in the Gapado mainly feed on Lizard and Centipedes in spite of relatively various available food sources, might be due to the low density of other food sources in the Gapado. Red-Tongued viper snake could be feeding on foods that are low in quality but are easily accessible, to minimize energy consumption on searching for other more nutritious foods. A snake tends to select the size of its food depending on the size of its own head. The positive correlation was found between the size of the heads of Red-Tongued viper snakes from the Jeju island and the diameter of their foods. The head size was larger in the males than females in viper snake population from the Jeju Island, which might effect on their selection of foods. However, no significant difference was found between the sizes of the head and the food in the Red-Tongued viper snake population from the Gapado. The findings of this study would provide meaningful data, which directly shows that even within the same viper species they choose different available food sources according to their inhabitance. This leads to their growth and adaptation to their environment which is beneficial for sustaining of its population.

• Journal of Gastric Cancer
• /
• v.8 no.4
• /
• pp.176-181
• /
• 2008

Purpose: The adipocyte-derived cytokine leptin plays a major role in the control of stable body weight by suppressing food intake and increasing energy metabolism. Leptin regulates the cell proliferation of various epithelial cells and it may be involved in the promotion of cancer. Leptin and its receptor are highly expressed in gastric adenocarcinoma, but the association between the serum leptin level and the tissue expression of leptin is uncertain. We evaluated the serum leptin level and the expressions of leptin and leptin receptor in gastric cancer, and we explore the possible mechanism and role of leptin in the carcinogenesis of gastric cancer. Materials and Methods: 72 carcinomas that were curatively resected at our hospital from October 2005 to March 2007 were included in this study. By immunoassay and immunohistochemical staining, we evaluated the serum leptin level and the expressions of leptin and its receptor, and we analyzed their relationship together with the clinicopathological variables. Results: The serum leptin level was increased as the patient's BMI increased and it was decreased in H. pylori infected patients. The expression of leptin was increased as the TNM stage increased (P=0.014), and the expression of leptin receptor in the intestinal type gastric adenocarcinoma was higher than that in the diffuse type gastric adenocarcinoma (71.4% vs 28.6%, respectively, P=0.033). Conclusion: There was no significant correlation between the serum leptin level and expression of leptin in gastric cancer patients. The expression of leptin was associated with the TNM stage, but its role in the pathogenesis of gastric cancer has to be elucidated.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.53-62
• /
• 2017

Electric power which is the energy source of economy and industries requires long distance transportation due to regional difference between its production and consumption, and it is supplied through the multi-loop transmission and distribution system. Prior to its actual use, electric power flows through several transformations by voltage transformers in substations depending on the characteristics of each usage, and a transformer has the structure consisting of the main body, winding wire, insulating oil and bushings. A transformer fire that breaks out in substations entails the primary damage that interrupts the power supply to houses and commercial facilities and causes various safety accidents as well as the secondary economic losses. It is considered that causes of such fire include the leak of insulating oil resulting from the destruction of bottom part of bushings, and the chain reaction of fire due to insulating oil that reaches its ignition point within 1 second. The smoke detector and automatic fire extinguishing system are established in order to minimize fire damage, but a difficulty in securing golden time for extinguishing fire due to delay in the operation of detector and release of gas from the extinguishing system has become a problem. Accordingly, this study was carried out according to needs of active mechanism to prevent the spread of fire and block the leak of insulating oil, in accordance with the importance of securing golden time in extinguishing a fire in its early stage. A bushings fireproof structure was developed by applying the high temperature shape retention materials, which are expanded by flame, and mechanical flame cutoff devices. The bushings fireproof structure was installed on the transformer model produced by applying the actual standards of bushings and flange, and the full scale fire test was carried out. It was confirmed that the bushings fireproof structure operated at accurate position and height within 3 seconds from the flame initiation. It is considered that it could block the spread of flame effectively in the event of actual transformer fire.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.189-196
• /
• 1992

To know the extension effect of storage temperature on the pre-rigor period of plaice, Paratichthys olivaceus muscle, the relationship between early changes after death and temperature dependency was studied. Killed plaices instantly with spiking at the brain were stored at $-3^{\circ}C,\;0^{\circ}C,\;5^{\circ}C\;and\;10^{\circ}$ used in studying the changes in rigor Index, ATP and its related compounds, lactate contents and K-value. The most shortest onset time of rigor-mortis and full rigor was revealed in the sample stored at $-3^{\circ}C$ among the all samples, where rigor-mortis began at 4hrs after spiking and maximum tension was attained after 28hrs. However, in case of fresh plaice muscle stored at $10^{\circ}C$, the onset of rigor-mortis and full rigor were retarded to 14hrs and 52hrs after spiking. ATP in sample stored at $5^{\circ}C\;and\;10^{\circ}C$ were decomposed slowly than sample at $0^{\circ}C\;-3^{\circ}C $ and within 35hrs storage. The fastest rate and the maximum content of lactate accumulation were showed in sample stored at $-3^{\circ}$ among the all samples. The correlation coefficient(r) between the rate of rigor mortis and ATP breakdown, rigor mortis and lactate accumulation, and ATP breakdown and lactate accumulation were -0.981946, 0.965044, and -0.964728, respectively. Freshness of $-3^{\circ}C$ stored samples was maintained for the longest time compared with other stored samples. The times reached around $20\%$ of K-value were 240hrs for samples stored at $-3^{\circ}C,\;96hrs\;for\;0^{\circ}C\;samples,\;71hrs\;for\;5^{\circ}C\;samples,\;and\;22hrs\;for\;10^{\circ}C$ samples. Samples stored at $-3^{\circ}C,\;and\;0^{\circ}C$ were showed higher temperature dependency on rate of rigor-mortis, ATP breakdown, and lactate accumulation than $5^{\circ}C\;and\;10^{\circ}C$ stored samples, but those samples have a lower temperature dependency on K-value.