• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.153-159
• /
• 2018

The purpose of this study is to grasp the internet use time that young people use for purposes other than learning purpose, to grasp the perceived status of the youth according to internet use time and to grasp the interrelationships of them. Using the 2016 youth health behavior online survey, the odds ratios and 95% confidence intervals of perceived status according to internet use time were calculated by binary logistic regression analysis. The main results are as follows. In perceived health and perceived oral health the odds ratios of perceived who feel that they are perceived and unhealthy as the time spent using the Internet increased significantly compared to those who did not use the Internet for learning purposes. In the perceived body type, the odds ratio of being overweight increased significantly with longer internet use time. The odds ratios of perceived happiness were 1.19 times (CI = 1.10-1.30) higher than the perceived expectation of unhappiness when using the Internet for over 300 minutes. The use of the internet for a long time other than the purpose of learning may have a negative effect on the health and happiness of the youth, so we think that the recommended time for using the internet is necessary.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.616-622
• /
• 2018

Energy which is released by a huge earthquake can reach the ionosphere and induce disturbances. Those disturbances can detected by analyzing the global navigation satellite system (GNSS) satellite's signal. For detecting those disturbances, band-pass filter is generally used. Therefore, it is important to select proper pass band that can contain disturbance's frequency. In this paper, we analyzed a frequency of the ionospheric disturbances which are induced by earthquake by using GNSS signal. For analyzing seismogenic ionospheric disturbances, we calculated a geometry free combination of carrier phase to obtain a ionospheric delay. After that, the fast Fourier transform was applied to the 1 mHz high-passed ionospheric delay. As a result of analyzing disturbances, the frequency band of earlier disturbances was 4.5 mHz~11mHz and the representative frequency was 5.7 mHz. The frequency band of subsequent disturbances was 6 mHz~10 mHz and the representative frequency was 7.3 mHz.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.291-303
• /
• 2013

After establishing national greenhouse gas emission reduction goals, the South Korean government has been pursuing sector- and industry-specific greenhouse gas emission reduction measures; in support of which, metropolitan city / state governing entities, such as Gyeonggi Province, etc., have been in lock steps by establishing and executing climate change measures that are appropriate for the regional characteristics. However, in the case of local governments, difficulties abound due to the fact that the per-unit greenhouse gas emission amounts and the future emission estimates for establishing reduction targets are not clear. In order to establish correct climate change measure policies, the policy directions and the assessment of verified greenhouse gas emission amounts would need to serve as the basis, and along with the national level climate change effect and vulnerability assessment, there's a need to develop methodologies that take into consideration the local characteristics and conditions. To this end, this study calculated the greenhouse gas emission amounts of the City of Siheung, a basic local government in Gyeonggi Province, by using the GEBT (Greenhouse gas Emission Business-as-usual Tool) developed by the National Institute of Environmental Research to facilitate easy calculations of BAU (business-as-usual) emission quantities by local governing entities.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1025-1032
• /
• 2018

Snow Cover is a form of precipitation that is defined by snow on the surface and is the single largest component of the cryosphere that plays an important role in maintaining the energy balance between the earth's surface and the atmosphere. It affects the regulation of the Earth's surface temperature. However, since snow cover is mainly distributed in area where human access is difficult, snow cover detection using satellites is actively performed, and snow cover detection in forest area is an important process as well as distinguishing between cloud and snow. In this study, we applied the Normalized Difference Snow Index (NDSI) and the Normalized Difference Vegetation Index (NDVI) to the geostationary satellites for the snow detection of forest area in existing polar orbit satellites. On the rest of the forest area, the snow cover detection using $R_{1.61{\mu}m}$ anomaly technique and NDSI was performed. As a result of the indirect validation using the snow cover data and the Visible Infrared Imaging Radiometer (VIIRS) snow cover data, the probability of detection (POD) was 99.95 % and the False Alarm Ratio (FAR) was 16.63 %. We also performed qualitative validation using the Himawari-8 Advanced Himawari Imager (AHI) RGB image. The result showed that the areas detected by the VIIRS Snow Cover miss pixel are mixed with the area detected by the research false pixel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.19-26
• /
• 2021

The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 mm × 20 mm × 20 mm structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.

• Journal of the Korean earth science society
• /
• v.42 no.1
• /
• pp.11-38
• /
• 2021

Detrital zircon U-Pb dating of samples from the Baekseoktan (Iljik Formation), Mananjaam (Jeomgok Formation), and Sinseongri (Sagok Formation) geosites in the Cheongsong Global Geopark were carried out to estimate the depositional age and provenance of the Hayang Group in the Gyeongsang Basin. In the Iljik Formation, Jurassic and Triassic zircons are dominant with minor Precambrian zircons, with no Cretaceous zircon. In contrast, the Jeomgok and Sagok formations show very similar age distributions, which have major age populations of Cretaceous, Jurassic, and Paleoproterozoic ages. The weighted mean ages of the youngest zircon age groups of the Jeomgok and Sagok formations are 103.2±0.3 and 104.2±0.5 Ma, respectively. Results suggest that the depositional ages of the Jeomgok and Sagok Formations are Albian. The detrital zircon age spectra indicate a significant change in provenance between the Iljik and Jeomgok formations. The sediments of the Iljik Formation are thought to have been supplied from nearby plutonic rocks. However, the Jeomgok and Sagok sediments are interpreted to have been derived from relatively young deposits of the Jurassic accretionary complex located in southwest Japan.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.135-144
• /
• 2021

In this study, we investigated the characteristics of the process of hydrogen production using boil-of gas (BOG) generated from an LNG-fueled ship and the application of hydrogen fuel cell systems as auxiliary engines. In this study, the BOG steam reformer process was designed using the UniSim R410 program, and the reformer outlet temperature, pressure, and the fraction and consumption of the product according to the steam/carbon ratio (SCR) were calculated. According to the study, the conversion rate of methane was 100 % when the temperature of the reformer was 890 ℃, and maximum hydrogen production was observed. In addition, the lower the pressure, the higher is the reaction activity. However, higher temperatures have led to a decrease in hydrogen production owing to the preponderance of adverse reactions and increased amounts of water and carbon dioxide. As SCR increased, hydrogen production increased, but the required energy consumption also increased proportionally. Although the hydrogen fraction was the highest when the SCR was 1.8, it was confirmed that the optimal operation range was for SCR to operate at 3 to prevent cocking. In addition, the lower the pressure, the higher is the amount of carbon dioxide generated. Furthermore, 42.5 % of the LNG cold energy based on carbon dioxide generation was required for cooling and liquefaction.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.149-169
• /
• 2022

Indonesia coal is widely consumed as a major energy source in Asian countries, such as China, India, and Korea. In the paper, the characteristics of the coal-bearing basin and coal deposits in Indonesia are comprehensively reviewed using the exploration data accumulated through the coal exploration projects supported by Korean government subsidy. Cenozoic coal bearing sedimentary basins in Indonesia extensively contain coal deposits and are most productive in East Asia. Properties of coal deposits are variable depending on stratigraphy, depositional histories and tectonics. Eocene coal deposits tend to have thinner coal thickness and fewer numbers of coal seams, but have been major exploration targets due to higher calorific value and good coal quality. Late Oligocene-Early Miocene coal deposits occur in small scales, but are suitable enough for small to medium-sized coal mines. Miocene-Pliocene coal deposits, which are widely distributed across East Kalimantan and Sumatra, are being actively mined by taking advantage of thick coal thickness and abundant reserves in spite of their lower calorific values. The experience of various exploration informs that we need to have an overall understanding on geological conditions for successful coal exploration. The details on coal-bearing basin and coal deposits in Indonesia provided through the paper will be useful data for up-coming exploration activities by Korean companies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1145-1156
• /
• 2022

In order to effectively secure site suitability for the development of large-scale offshore wind farms, it is essential to minimize the environmental impact of development and analyze the conflicts of benefit between social, ecological, and economic core values. In addition, a preliminary review of site adequacy must be preceded in order not to collide with other used areas in the marine spatial plan. In addition, it is necessary to conduct local meteorological characteristics analysis including wind resources near Jeollanam-do area before project feasibility study. Therefore, wind resource analysis was performed using the observation data of the meteorological mast installed in Wangdeungnyeo near Anmado, Yeonggwang, and the optimal site was selected after excluding geographical constraints related to the location of the offshore wind farm. In addition, the annual energy production was calculated by deriving the optimal wind farm arrangement results suitable for the local wind resources characteristics based on WindSim SW, and it is intended to be used as basic research data for site discovery and selection of suitable sites for future offshore wind farm projects.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.399-406
• /
• 2022

In line with the megatrend of 2050 carbon neutrality, the amount of critical minerals used in clean-energy technology is expected to increase fourfold and sixfold, respectively, according to the Paris Agreement-based scenario as well as the 2050 carbon-neutrality scenario. And, in the case of Korea, in terms of the battery supply chain used for secondary batteries, the midstream that manufactures battery materials and battery cell packs shows strength, but the upstream that provides and processes raw materials is experiencing difficulties. The Korea Institute of Geoscience and Mineral Resources has established a strategy to secure lithium, nickel, and cobalt and is conducting surveys to respond to the upstream risk of these types of battery raw materials. In the case of lithium, exploration has been carried out in Uljin, Gyeongsangbuk-do since 2020, and by the end of 2021, the survey area was selected for precision exploration by synthesizing all exploration data and building a 3D model. Potential resources will be assessed in 2022. In the case of nickel, the prospective site will be selected by the end of 2022 through a preliminary survey targeting 10 nickel sulfide deposits that have been prospected in the past. In the case of cobalt, Boguk cobalt is known only in South Korea, but there is only a record that cobalt was produced as a minor constituent of hydrothermal deposit. According to the literature, a cobalt ore body was found in the contact area between serpentinite and granite, and a protocol for cobalt exploration in Korea will be established.