• Title/Summary/Keyword: 에너지 산출

Search Result 766, Processing Time 0.041 seconds

Analysis of LNG Perspectives for EERS (EERS시행을 위한 천연가스 에너지절감 추이분석)

  • Kim, Yong-Ha;Woo, Sung-Min;Park, Hwa-Young;Kim, Euy-Kyung;Yoo, Jeong-Hee
    • Journal of Energy Engineering
    • /
    • v.23 no.3
    • /
    • pp.7-12
    • /
    • 2014
  • This paper suggest mandatory target predestinator of natural gas wholesale and retail provider will set appropriate target. To analysis natural gas energy saving trend forecast, reduce natural gas forecast and using technology and forecast analysis for equipment is draw based on result of developing tool that more detailed gas field. Also this paper calculate effect on energy saving through various scenarios, efficiency consideration of gas equipment and subsidy condition.

Estimation of Safety Area for Intercept Debris by Using Modeling and Simulation (탄도탄 요격시험 안전구역 산출을 위한 모델링 및 시뮬레이션)

  • Lee, Sungkyun;Go, Jinyong;Han, Yongsu;Kim, Changhwan
    • Journal of the Korea Society for Simulation
    • /
    • v.29 no.1
    • /
    • pp.1-9
    • /
    • 2020
  • The ballistic missile threat continues to increase with the proliferation of missile technology. In response to this threat, many kinds of interceptors have been emphasized over the years. For development of interceptor, systematic flight tests are essential. Flight tests provide valuable data that can be used to verify performance and confirm the technological progress of ballistic missile defense system including interceptor. However, during flight tests, civilians near the test region could be risk due to a lot of intercept debris. For this reason, reliable estimate of safety area for the flight tests should be preceded. In this study, prediction of safety area is performed through modeling and simulation. Firstly, behaviors of ballistic missile and interceptor are simulated for those entire phase including interception to obtain the relative intercept velocity and the relative impact angle. By using obtained data of kinetic energy, the fragment ejection velocity is calculated and fragment trajectories are simulated by considering drag, gravity and wind effects. Based on the debris field formation and hazard evaluation of debris, final safety area is calculated.

The Evaluation of Solar Power Promotion Policy: From the Perspective of FIT(Feed-in Tariff) (국내 태양광보급사업의 평가: 발전차액 지원제도를 기준으로)

  • Eo, Sung-Yun;Um, Shin-Young;Lee, Jin-Ho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.401-404
    • /
    • 2009
  • 정부는 신재생에너지 보급지원을 위해 2002년도부터 발전차액지원제도를 시행해 오고 있다. 본 연구에서는 발전차액지원제도와 관련된 에너지관리공단의 내부 자료를 이용하여 119개의 태양광발전사업의 실증평가를 시행하였다. 실증분석을 위해 단위투자비당 발전량을 지수화하고 투자비 대비 효율을 산출하였다. 또한 이 분석을 위해 일사량, 설비용량, 모듈 인버터 투자비 등을 고려하였다. 분석결과 투자대비 효율 산정결과에 일사량과 단위 설비용량당 모 듈 인버터 투자비의 영향이 크게 나타난 것으로 확인되었다. 단위 투자비당 발전량을 분석한 결과 전라도의 태양광발전소의 효율은 분석 대상인 24개 지역의 평균보다는 높으나 발전소별 편차가 높게 나타난다는 점은 향후 보급사업을 평가하는 경우 추가적으로 고려되어야 할 문제라고 판단된다. 기타 자료분석 결과에 따라 효율관리를 위한 대안을 제시하였다.

  • PDF

A Study on the Estimation Model of Cost of Energy for Wind Turbines (풍력발전기의 에너지 비용 산출에 대한 고찰)

  • Chung, Taeyoung;Moon, Seokjun;Rim, Chaewhan
    • New & Renewable Energy
    • /
    • v.8 no.4
    • /
    • pp.3-12
    • /
    • 2012
  • Large offshore wind farms have actively been developed in order to meet the needs for wind energy since the land-based wind farms have almost been fully developed especially in Europe. The key problem for the construction of offshore wind farms may be on the high cost of energy compared to land-based ones. NREL (National Renewable Energy Laboratory) has developed a spreadsheet-based tool to estimate the cost of wind-generated electricity from both land-based and offshore wind turbines. Component formulas for various kinds and scales of wind turbines were made using available field data. In this paper, this NREL estimation model is introduced and applied to the offshore wind turbines now under designing or in production in Korea, and the result is discussed.

Assessment of Wind Energy Potential around Jeju Coastal Area (제주 연안지역 주변의 잠재 풍력에너지 평가)

  • Kim, Nam Hyeong;Jin, Jung Woon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.6B
    • /
    • pp.617-625
    • /
    • 2010
  • The selection of a site where strong wind blows is important to increase effectively the electricity of wind power in proportion to the cube of the wind speed. It is advisable to establish the wind turbine in the coastal area with strong wind speed rather than in the inland. And the development of offshore wind energy is expected to solve the noise problem that is one of the important weaknesses in the wind turbine. In the process of the development business of wind energy, knowing forehead the wind power possibility in any area is one of the essential factors to choose the most optimum site of wind power. In this paper, the potential of wind power around JeJu coastal area is examined by using the wind data that Korea Meteorological Administration has surveyed for 10 years in 14 observation points. Wind speed data is revised to wind speed in 80 meters assuming installation height of the wind turbine, and wind power density and annual wind energy are also calculated. And annual electricity generation and percent of energy efficiency in all the observation points are estimated by using the information about 3,000 KW wind turbine.

Derivation of Appropriate Thermal Transmittance Alternatives in Apartment Remodeling (아파트의 리모델링시 적합한 열관류율 대안의 도출)

  • Kim, Song-Do;Lee, Sang-Hoon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.8
    • /
    • pp.4012-4018
    • /
    • 2013
  • This paper proposes an energy conservation scheme when apartment remodeling is provided, which analyzes the energy conservation techniques that are suitable for overseas passive houses. Subsequently, a passive solution that is more suitable for our country is derived. In order to examine the energy saving rate applying to passive solution, it evaluates the energy saving rate of 5 specific cases by taking advantage of internal building energy efficiency rating certification system, classifies them and analyzes them. Finally, a rational alternative is devised, and then which is implemented in the internal apartment housing remodeling project. This scheme can save 40% of the energy in comparison with typical apartment building.

Estimation Method of Evapotranspiration over Goheung bay Wetland (고흥만 습지에서 증발산량의 산출 방법)

  • KWON, Byung Hyuk;KIM, Dong Su;KIM, Geun Hoi;KANG, Dong Hwan
    • Journal of Wetlands Research
    • /
    • v.10 no.1
    • /
    • pp.21-30
    • /
    • 2008
  • Evapotranspiration is an important factor in the energy interaction process between the surface and the air. Over a vegetable canopy, evapotranspiration was investigated by measuring the sensible heat flux, the soil heat flux and the net radiation flux. Evapotranspiration based on routine AWS data is in good agreement with that estimated from the energy balance equation except for weak wind shear less than $1s^{-1}$ and a cloudy period. Soil heat flux can be approximately to 10% of net radiation flux at the lower layer. When the slope of the saturation vapor pressure versus temperature curve ($de_s/dT$) is approximated to 1.5, the evapotranspiration can be described in function of the net radiation energy flux over Goheung bay wetland covered with the vegetable canopy, reeds.

  • PDF

Process optimization for syngas reformer by using dynamic simulation (Dynamic 공정 시뮬레이션을 이용한 합성가스 개질공정 최적화 연구)

  • Bae, Jihan;Kim, Yongheon;Park, Myongho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.138-138
    • /
    • 2011
  • GTL(Gas to Liquid) 합성유 생산 공정은 크게 합성가스 개질공정(reformer), FT 반응공정, upgrading 공정으로 구성된다. 본 연구에서는 FT 반응기에 유입되는 합성가스의 생산공정인 개질공정 최적화 시뮬레이션을 수행하였다. 기존에 HYSYS 공정 모사 tool로 구현한 개질공정 모델에 dynamic simulation을 적용하여 공정 운전 시간 변화에 따른 온도/압력/조성의 일정범위 별 생산 가스의 성분비를 모사하고자 한다. Dynamic 공정 시뮬레이션은 모사 대상 공정의 운전 시간 별 결과값 변화를 산출할 수 있는 방법으로 기존 정상상태(steady-state) 시뮬레이션에 비해 현실 공정의 운전 변수를 보다 더 정확하게 반영할 수 있는 장점이 있다. 본 시뮬레이션은 1bpd급 GTL 파일럿 플랜트의 설계 자료를 근거로 수행되었으며, 향후 운전 데이터를 feedback하여 최적의 운전 매뉴얼 도출자료로 활용코자 한다. 아울러, 다음의 시간 변화별 모사 결과 데이터들을 산출하고 공정의 최적운전 조건을 분석하고자 한다. - 시간에 따른 공정의 온도/압력 변화, 이에 연동되는 반응기 출구의 1) $H_2$/CO 비율, 2) $CH_4$ conversion, 3) $CO_2$ conversion 본 연구의 결과 데이터를 1bpd급 GTL 플랜트 내 합성가스 개질공정의 운전조건 최적화에 적용코자 하며, 이는 개질반응기의 안정적인 연속운전을 통한 GTL 통합공정의 운전 효율향상에 기여 가능하리라 기대된다. 향후 개질공정의 후단공정인 FT 합성공정 시뮬레이션 과업과 연계하여 GTL 통합공정 시뮬레이션 및 최적화에 따른 실증 규모의 스케일업 기반 데이터를 마련할 수 있을 것이다.

  • PDF

A Study on the Transaction Volume Calculation model for Improving the Measurement Accuracy of Hydrogen Fuelling Station (수소충전소 계량 정확도 향상을 위한 거래량 산출 모델 연구)

  • JINYEONG CHOI;HWAYOUNG LEE;SANGSIK LIM;JAEHUN LEE
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.33 no.6
    • /
    • pp.692-698
    • /
    • 2022
  • With the expansion of domestic hydrogen fuelling station infrastructure, it is necessary to secure reliability among hydrogen traders, and for this, technology to accurately measure hydrogen is important. In this study, 4 types of hydrogen trading volume calculation models (model 1-4) were presented to improve the accuracy of the hydrogen trading volume. In order to obtain the reference value of model 4, and experiment was conducted using a flow rate measurement equipment, and the error rate of the calculated value for each model was compared and analyzed. As a result, model 1 had the lowest metering accuracy, model 2 had the second highest metering accuracy and model 3 had the highest metering accuracy until a certain point. But after the point, model 2 had the highest metering accuracy and model 3 had the second metering accuracy.