• Clean Technology
• /
• v.19 no.3
• /
• pp.320-326
• /
• 2013

Nano-sized PtRu-Ni/VC and PtRu-Sn/VC electrocatalysts were synthesized by a one-step radiation-induced reduction (RIR) (30 kGy) process using distilled water as the solvent and Vulcan XC-72 as the supporting material. The obtained electrocatalysts were characterized by transmission electron microscopy (TEM), scanning electron microscope energy dispersive spectroscopic (SEM-EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. The catalytic efficiency of electrocatalysts was examined for oxygen reduction, MeOH oxidation and CO stripping decreased in the following order, Hydrogen stripping : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK). MeOH oxidation : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/ VC$^{(R)}$ (E-TEK). Unit cell performance : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK) catalysts.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.4
• /
• pp.129-134
• /
• 2018

Recently, the artificial neural network (ANN) model is a promising technique in the prediction, numerical control, robot control and pattern recognition. We predicted the outside temperature of greenhouse using ANN and utilized the model in greenhouse control. The performance of ANN model was evaluated and compared with multiple regression model(MRM) and support vector machine (SVM) model. The 10-fold cross validation was used as the evaluation method. In order to improve the prediction performance, the data reduction was performed by correlation analysis and new factor were extracted from measured data to improve the reliability of training data. The backpropagation algorithm was used for constructing ANN, multiple regression model was constructed by M5 method. And SVM model was constructed by epsilon-SVM method. As the result showed that the RMSE (Root Mean Squared Error) value of ANN, MRM and SVM were 0.9256, 1.8503 and 7.5521 respectively. In addition, by applying the prediction model to greenhouse heating load calculation, it can increase the income by reducing the energy cost in the greenhouse. The heating load of the experimented greenhouse was 3326.4kcal/h and the fuel consumption was estimated to be 453.8L as the total heating time is $10000^{\circ}C/h$. Therefore, data mining technology of ANN can be applied to various agricultural fields such as precise greenhouse control, cultivation techniques, and harvest prediction, thereby contributing to the development of smart agriculture.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.373-379
• /
• 2019

Polymethyl methacrylate (PMMA), a self-polymerizing resin for removable orthodontic devices, has been used as a dental orthodontic device for many years because of its advantages such as color stability, volume stability, and tissue compatibility. However, such a removable orthodontic device has a disadvantage that the longer the use in the oral cavity due to the low strength of the PMMA fracture of the orthodontic device resin in use. In this study, zinc nanoparticles (ZNP) were mixed with orthodontic PMMA to introduce strength effect. Rectangular samples ($1.4{\times}3.0{\times}19.0mm$) of orthodontic PMMA (0, 0.5, 1.0, 2.0 and 4.0%) containing ZNP were prepared. The finished specimen was tested for three-point bending strength at a speed of 1 mm / min, and the Vickers hardness was measured three times using a hardness tester. The surface roughness was measured with a surface roughness. As a result, the 3-point bending strength did not change significantly (p>0.05). Surface energy increased significantly. As a result, we successfully synthesized ZNP in this study and prepared the dispersed resin specimen for calibration. It will be possible to develop high-density dental orthodontic resins.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.65-75
• /
• 1999

Purpose: The aim of this study is to demonstrate the feasibility of 2-[fluorine-18] fluoro-2-deoxy-D-glucose (F-18-FDG) whole body scan (FDG W/B Scan) using dual-head gamma camera equipped with ultra high energy collimator in patients with various cancers, and compare the results with those of coincidence imaging. Materials and Methods: Phantom studies of planar imaging with ultra high energy and coincidence tomography (FDG CoDe PET) were performed. Fourteen patients with known or suspected malignancy were examined. F-18-FDG whole body scan was performed using dual-head gamma camera with high energy (511 keV) collimators and regional FDG CoDe PET immediately followed it Radiological, clinical follow up and histologic results were correlated with F-18-FDG findings. Results: Planar phantom study showed 13.1 mm spatial resolution at 10 cm with a sensitivity of 2638 cpm/MBq/ml. In coincidence PET, spatial resolution was 7.49 mm and sensitivity was 5351 cpm/MBq/ml. Eight out of 14 patients showed hypermetabolic sites in primary or metastatic tumors in FDG CoDe PET. The lesions showing no hypermetabolic uptake of FDG in both methods were all less than 1 cm except one lesion of 2 cm sized metastatic lymph node. The metastatic lymph nodes of positive FDG uptake were more than 1.5 cm in size or conglomerated lesions of lymph nodes less than 1cm in size. FDG W/B scan showed similar results but had additional false positive and false negative cases. FDG W/B scan could not visualize liver metastasis in one case that showed multiple metastatic sites in FDG CoDe PET. Conclusion: FDG W/B scan with specially designed collimators depicted some cancers and their metastatic sites, although it had a limitation in image quality compared to that of FDG CoDe PET. This study suggests that F-18-FDG positron imaging using dual-head gamma camera is feasible in oncology and helpful if it should be more available by regional distribution of FDG.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.65-77
• /
• 1996

Using the 2-D and 3-D Hoffman brain phantom, 3-D Jaszczak phantom and Single Photon Emission Computed Tomography, the effects of data acquisition parameter, attenuation, noise, scatter and reconstruction algorithm on image quantitation as well as image quality were studied. For the data acquisition parameters, the images were acquired by changing the increment angle of rotation and the radius. The less increment angle of rotation resulted in superior image quality. Smaller radius from the center of rotation gave better image quality, since the resolution degraded as increasing the distance from detector to object increased. Using the flood data in Jaszczak phantom, the optimal attenuation coefficients were derived as 0.12cm$\^$-1/ for all collimators. Consequently, the all images were corrected for attenuation using the derived attenuation coefficients. It showed concave line profile without attenuation correction and flat line profile with attenuation correction in flood data obtained with jaszczak phantom. And the attenuation correction improved both image qulity and image quantitation. To study the effects of noise, the images were acquired for 1min, 2min, 5min, 10min, and 20min. The 20min image showed much better noise characteristics than 1min image indicating that increasing the counting time reduces the noise characteristics which follow the Poisson distribution. The images were also acquired using dual-energy windows, one for main photopeak and another one for scatter peak. The images were then compared with and without scatter correction. Scatter correction improved image quality so that the cold sphere and bar pattern in Jaszczak phantom were clearly visualized. Scatter correction was also applied to 3-D Hoffman brain phantom and resulted in better image quality. In conclusion, the SPECT images were significantly affected by the factors of data acquisition parameter, attenuation, noise, scatter, and reconstruction algorithm and these factors must be optimized or corrected to obtain the useful SPECT data in clinical applications.

• Journal of Nutrition and Health
• /
• v.55 no.5
• /
• pp.543-557
• /
• 2022

Purpose: Conditions that limit activity constitute one of the important factors that threaten the health of the elderly. This study sought to analyze the dietary habits and nutritional intake status of the Korean elderly who were faced with activity limitations. Methods: Utilizing data from the 2019 Korea National Health and Nutrition Examination Survey, we classified 1,383 elderly people aged 65 and over into 2 groups: those with activity limitations (n = 222, LG) and those without (n = 1,161, NG). We conducted a comparative analysis of the general characteristics, dietary habits, intake of major food groups, energy, and major nutrients. The nutrient adequacy ratio (NAR), index of nutritional quality (INQ), and healthy eating practices were also analyzed. Complex sampling analysis was utilized for all the analyses with energy intake and socio-demographic variables adjusted. Results: The average age (73.8 years) of members of the LG was higher than those of the NG (72.6 years; p = 0.010). A higher percentage of participants in the LG lived alone (28.1%) compared to those in NG (17.2%; p = 0.004). The LG participants tended to regard their health status as "bad" or "very bad" (62.7%) more often than those in the NG (19.3%; p < 0.001). The LG subjects ate breakfast less frequently (p = 0.054) and ate out significantly less often than the NG subjects (p < 0.001). The LG subjects ate more grain (p = 0.001), fewer seeds (p = 0.014) and vegetables (p = 0.039). Carbohydrate made up a large percentage of their energy intake (p = 0.026). The LG subjects had significantly lower NARs of energy (p = 0.021), protein (p = 0.031), and riboflavin (p = 0.037). The LG participants also had a significantly lower rate of healthy eating practices (22.7%) compared to those in the NG (37.8%; p < 0.001). Conclusion: Activity-limited elderly, despite their need for appropriate dietary management, were poorly nourished. They were likely to live alone, thereby making it hard to provide them with social support. Hence, there is a need to provide nutrition education and policy support for the elderly bearing the burden of limited activity.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2011

Purpose: In this study, we tried to check the usefulness of two Linear Accelerators, Clinac IX and 21EX (Varian, Palo Alto, CA), which are equipped in Ajou Medical Center. From 2008 to 2010, we evaluated the error range of Absolute Dose based on the daily output, which was measured by CHECKMATE$^{TM}$ (Sun Nuclear, Melbourne, FL). Materials and Methods: For Daily Q.A, photon beams of two linear accelerators, 21EX and IX (6 MV and 10 MV, respectively) were measured daily by using CHECKMATE$^{TM}$ just before the treatment began, while the absolute dose was measured biweekly by using water phantom. We analyzed the data of measured values from the daily Q.A and the absolute dose from 2008 to 2010 for 21EX, and from 2009 to 2010 for IX. We utilized Excel 2007 (Microsoft, USA) to evaluate Average, Standard deviation and Confidence level of the data. Furthermore, in order to check the measured values of CHECKMATE$^{TM}$ and the significance of absolute dose, each error value was compared and analyzed. Results: During the observation period, the output of two equipment's absolute dose increased in process of time and in both 6 MV and 10 MV, there was a similar increasing trend. In addition, the error rate of the measured value of CHECKMATE$^{TM}$ and the value of absolute dose were under 0.34, which means that there is a similarity relationship between the two measured values. After checking that the measured value of CHECKMATE$^{TM}$ increased, We measured the absolute dose to adjust that. When the error range was close to 2~3%, the number of changing the output was four for 21EX and three for IX. Conclusion: As a result of measuring and analyzing the daily output changes for two years by using CHECKMATE$^{TM}$, we could find that there is a significance between the output which we should obey during Q.A, and the measured value of absolute dose within the error tolerance of 2~3%. Thus, the use of CHECKMATE$^{TM}$ can be positively considered for more efficient and reliable daily output verification of linear accelerator. It can also be a good standard for other medical centers to understand the trends of linear accelerator and to refer to for the correction of each output.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2001

The purpose of this study was to examine physical properties of the addition of green tea powder on bread flour and dough rheology of white pan bread. Three levels(0.1, 0.5 and 1.0% ) of each green tea powder with bread flour were tested for their effects in dough mixing using rapid disco analyzer, alveogram and farinogram. Addition of green tea powder tended to reduce initial pasting temperature and increase peak viscosity, break down and set back. L(extensibility) and G(swelling index) value in alveogram showed decrement with increasing green tea powder. These meant that the volume of white pan bread would show same tendency. The use of green tea powder increased consistency and water absorption of the bread flour but decreased development time, salability and degree of softening on farinogram. White pan bread with green tea powder had higher value of hardness and springness than without it. Sensory evaluation determined that the white pan bread with 0.5% green tea powder had the highest score.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.256-264
• /
• 2021

Rapeseed (Brassica napus L.) is generally sown in late autumn and harvested in early summer in Korea, however, spring cultivation has also been attempted in some areas because frequent climate changes induce reducing productivity. Therefore, there is a need for a transplanting technology that is relatively easy to control of cropping season according to changes in cultivation conditions. In this study, to find out the optimal characteristics of seedlings for machine transplanting of spring cultivation, seedling morphological characteristics were investigated according to the seedling age of three varieties for 2020 and 2021. The hypocotyl length was less than 2 cm in both years and the 40-day-old seedling was the shortest among all seedling ages. The number and size of leaf were increased with longer seedling age in both years. To evaluate seedling quality, total seedling length, seedling weight, and impact resistance were measured before transplanting. Total seedling length was the longest in 40-day-old seedlings and the shortest in 25-day-old seedlings in both years. In the case of seedling weight, no significant differences were observed depending on the seedling age and the impact resistance increased with increasing seedling age. Finally, 'Jungmo7001', 'Naehan', and 'Tamla' showed a high transplanting rate in seedlings grown for more than 30 days, 35 days, and 40 days, respectively, in the field using a general transplanter. These results suggest that the proper seedling age for transplanting is limited depending on the rapeseed varieties. The suitable seedling cultivation method can be selected for different cultivation environments.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.611-617
• /
• 2016

Remanufacturing that is the rebuilding of a product to specifications of the original manufactured product by collecting used-product, completely disassembling, cleaning and repairing or replacing with a new part and reassembling has been received attention in aspects of resource, recycling because it is a great environmental improvement. Remanufacturing is the rebuilding of a product to specifications of the original manufactured product by collecting used-product, completely disassembling, cleaning and repairing or replacing with a new part and reassembling. With a great environmental improvement and resource recycling and conservation, many studies were conducted. Up to date, remanufacturing activities are mainly applied to automobile parts and printer toner cartridge in South Korea. However, remanufacturing of rental product is not well conducted although rental products are collected in good condition and could be remanufactured in the same condition as a new product. Therefore, in this study, we conducted life cycle assessment (LCA) to an air cleaner product that is one of rental products. This study attempts to identify the processes in new products and remanufacturing life cycles that contribute the most environmental impacts. The results show that air cleaner remanufacturing could reduce about 20% of environmental impacts compared to new product. The greatest benefit related to environmental impact is with regard to ozone layer depletion potential (ODP), which is reduced by 94%. In the life cycle of air cleaner, raw material extraction stage had the most environmental impacts, especially with regard to abiotic depletion potential (ADP) and global warming potential (GWP). In the environmental impacts in each part, the ABS power had the highest environmental impacts.