• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.243-248
• /
• 2013

Internal combustion engines typically expel 30%-40% of the energy supplied by fuel to the environment through their exhaust system. Therefore, further significant improvements in the thermal efficiency of IC engines are possible by recovering the waste heat from the engine exhaust gas. With this fact in mind, a numerical simulation was carried out to investigate the potential of using thermoelectric generation with an internal combustion engine for waste heat recovery. Physical parameters such as the exhaust temperature and mass flow rate were evaluated in the exhaust system, and the optimum location for inserting a thermoelectric generator (TEG) into the system was determined. The TEG will be located in the exhaust system and will use the energy flow between the warmer exhaust gas and the external environment. The optimum position of the temperature distribution and the TEG performance were predicted through numerical analysis. The experimental results obtained showed that the power output significantly increases with the temperature difference between the cold and hot sides of the TEG.

• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.19-25
• /
• 2005

This study explains ther procedure that should be taken to develp a successful wind park project. It provides a guideline for the activities and studies to be done as a step by step solution. This study follows a chronological flow throughout the whole development Process. This Paper covers technical consideration, assessment of wind energy resource, wind Park siting and energy yield calculation This presented knowledge h3s been mostly gained by the experience from Youngduk wind park project. The further comparison study will be performed between the theoretical prediction and the actual yield of the Youngduk wind park.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.11
• /
• pp.1097-1102
• /
• 2010

In this paper, the energy flow analysis(EFA) of the body-in-white door of a real automotive was performed using the energy flow finite element method(EFFEM) to effectively predict the vibrational responses of built-up structures in the medium to high frequency range. To increase the validity of EFA results, the structural hysteresis damping loss factor was measured by the experiment using the concept of statistical energy analysis(SEA). As the excitation frequency increases, the predicted results simulated with EFFEM generally agree with the experimental results.

• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.1-5
• /
• 2011

For the hydrogen liquefaction, the large amount of energy is consumed, because precooling, liquefaction and ortho/para conversion heats should be eliminated. In this paper the basic design and thermal analysis are carried out to reduce the energy consumption by using LNG cold energy for precooling process in hydrogen liquefaction processes. The LNG cold energy utilization for hydrogen precooling enables not only to get energy saving for liquefaction, but to recover the wasted cold energy to sea water at the LNG terminal. The results show that the energy saving rate for liquefaction using LNG cold energy is almost 75% of current industrial hydrogen liquefaction plant. The demand flow-rate of LNG is only 15T/D for 1T/D hydrogen liquefaction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.357-359
• /
• 2007

해양에너지원 중에서 파랑은 모든 해역에 폭넓게 분포하므로 가용에너지원이 풍부하고 에너지를 회수하기 위한 장치를 설치할 수 있는 해역 또한 광범위하며 반도의 지형을 지닌 우리나라의 연안 해역에 대규모로 활용이 가능한 에너지 자원중 하나이다. 본 연구는 새로운 방식인 파력발전용 횡류형터빈인 케이슨 내장형 횡류터빈을 개발하기에 앞서 파랑수조의 왕복운동을 CFD해석을 통하여 구현하는 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.723-734
• /
• 1991

본 연구에서는 투사체의 충격으로 인해 복합재에 발생하는 손상을 해석하기 위해 우선 이와 관련이 있는 손상에너지를 구할 수 있도록 동적 유한요소 프로그램을 개발하는데 있으며, 이렇게 구한 결과들을 Husman의 실험결과와 비교함으로써 본 논문 의 유한요소 프로그램이 적층복합보에 충격으로 인하여 전달되는 총에너지와 손상에너 지를 구하는데 타당한 것인가를 검토하고 이 프로그램을 이용하여 다음과 같은 것들을 해석하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.999-1006
• /
• 2014

Mindlin plate theory includes the shear deformation and rotatory inertia effects which cannot be negligible as exciting frequency increases. The statistical methods such as energy flow analysis(EFA) and statistical energy analysis(SEA) are very useful for estimation of structure-borne sound of various built-up structures. For the reliable vibrational analysis of built-up structures at high frequencies, the energy transfer relationship between out-of-plane waves and in-plane waves exist in Mindlin plates coupled at arbitrary angles must be derived. In this paper, the new wave transmission analysis is successfully performed for various energy analyses of Mindlin plates coupled at arbitrary angles.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.90-94
• /
• 1988

본 논문은 반 잠수식 시추선과 선박과의 충돌해석에의 정적 압축법의 응용에 대해 다루었다. 선박이 시추선의 취약 부재에 충돌하는 경우를 가정하였으며 이 취약한 부재의 충돌에너지 흡수능력을 상세 해석 없이 추출하는 방법으로, 관련된 구조물 전체 강성 매트릭스를 부재의 양단에 정적 압축을 시켜 양단 유연도를 추출한 뒤 이 유연도를 양단에 가진 원통형 부재를 해석함으로써 외력-변형 관계를 얻을수 있었다. 충돌에너지 양은 외력-변형 선도를 적분함으로써 얻을 수 있다. 새로운 방법에 의한 결과를 3차원 수치해석 방법과 강체 프라스틱 방법에 의해서 얻어진 결과와 상호 비교하였으며, 이 새로운 방법이 해양구조물 충돌해석이 매우 효과적으로 응용될 수 있음을 알게 되었다.

• Composites Research
• /
• v.31 no.5
• /
• pp.177-185
• /
• 2018

Fiber metal laminate (FML) is a type of hybrid composites which consist of metallic and fiber-reinforced plastic sheets. As the FML has a drawback of the delamination that is a failure of the interfacial adhesive layer, the nominal stresses and the energy release rates should be determined to identify the delamination behavior. However, it is difficult to derive the nominal stresses and the energy release rates since the operating temperature of the equipment is restricted. For this reason, the objective of this paper is to predict the mode-I nominal stress and the mode-I energy release rate of the adhesive layer using the inverse analysis based on the Levenberg-Marquardt method. First, the mode-I nominal stress was assumed as the tensile strength of the adhesive layer, and the mode-I energy release rate was obtained from the double cantilever beam test. Next, the finite element method was applied to predict the mode-I delamination behavior. Finally, the mode-I nominal stress and the mode-I energy release rate were predicted by the inverse analysis. In addition, the convergence of the parameters was validated by trying to input two cases of the initial parameters. Consequently, it is noted that the inverse analysis can predict the mode-I delamination behavior, and the two input parameters were converged to similar values.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.5
• /
• pp.405-414
• /
• 2015

Fluid transport is a key issue in the development of microfluidic systems. Recently, Myong (2014) has proposed a new concept for droplet transport without external power sources and numerically validated the results for a hypothetical 2D, initially having a hemicylindrical droplet. In this paper, the movement of an actual water droplet, initially having a 3D hemispherical shape, on horizontal hydrophilic/hydrophobic surfaces is simulated using a commercial computational fluid dynamics (CFD) package, Fluent, with VOF (volume of fluid) method. The results are compared with the 2D analysis of Myong (2014), and the transport mechanism for the actual water droplet is examined based on the numerical results of the time evolution of the droplet shape, as well as the total kinetic, gravitational, surface free and pressure energies inside the droplet.