• Title/Summary/Keyword: 에너지관리공단

Search Result 163, Processing Time 0.023 seconds

World Interest and Activities on Marine Litter (해양쓰레기의 전 지구적 관심과 실행)

  • Jung, Rho-Taek
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.12 no.3
    • /
    • pp.173-180
    • /
    • 2009
  • After the UN General Assembly on 2006, Interest on the marine litter has rapidly increased internationally. The UN sub-organizations, UNEP/Regional Seas, FAO(Food and Agriculture Organization of the United Nations) and OC(Ocean Conservancy) as a one of world NGO had been tackled to collect information and prepared world reports related on marine litter, recently, those are published. Through the 10years experience of Korea's policy on marine litter since 1999, it is re-evaluated as a roll model internationally. In this paper, brief introduction of structure and function of Korea's authorities which are responsible for or are involved in the marine litter issue as well as the National Marine Litter Management Basic Plan which is established in 2008, has been provided. This paper also included the structure and roll of the marine litter initiative center in the plan. Change of the paradigm of action plan on marine litter in Korea already had been started.

  • PDF

Development of 800 kW class PM Direct Drive Synchronous Generator for KBP -750D WECS (KBP-750D 풍력 발전기에 사용되는 800 kW 급 영구자석, 직접구동형 발전기의 개발)

  • Kim D.E.;Lee H.G.;Suh H.S.;Han H.S.;Jung Y.G.;Chung C.W.;Kwak S.K.;Lim M.S.;Oh M.S.
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.1519-1521
    • /
    • 2004
  • 포항풍력에너지연구소와 (주)보국전기는 에너지 관리공단의 지원으로 2002년부터 직접구동형 풍력 터빈 KBP-750D에 사용될 발전기를 개발해 오고 있다. KBP-750D에 사용되는 발전기는 증속을 위한 gearbox를 사용하지 않는 직접 구동형 이라는 것과, 영구자석을 사용하여 여자하는 형식이라는 것이다. 이런 특징은 풍력발전에서 요구하는 주요 요구조건인 고효율, 고신뢰성을 만족시키기 위해서 매우 중요하다. 개발된 발전기는 25 rpm 정격에서 800 kW의 정격을 가지도록 설계되었다. 공극 직경은 3,320 mm 이며, stator의 길이는 705 mm, 4.5 mm의 공극, 84극을 가지고 있으며, 전체중량은 약 20 ton이다. 이 보고에서는 이 발전기의 물리설계 공학설계 등에 관해서 논의한다.

  • PDF

Study on the Device for Pump Efficiency Measurement (펌프의 효율측정 장비에 관한 연구)

  • Bae, Cherl-O
    • Journal of Korea Ship Safrty Technology Authority
    • /
    • s.33
    • /
    • pp.53-62
    • /
    • 2012
  • Pumps are used widely in feed water, cooling & heating system and process line of industrial and construction fields. They consume nearly 20% of the each nation's total electrical energy. But The management of pump energy wasn't controlled well. Their loss of energy is huge if they have been operated at low efficiency. The first buying cost of pump is small compare to the power consumption of pump, so we can recommend the suitable replace time and best operating condition of parts and pump to measure the pump efficiency. Pump efficiency is usually measured according to the two methods which they are called thermodynamic method and traditional technique. And we measured the pump efficiency using two methods using potable pump efficiency measurement device and compared the results with the real performance curve offered from pump maker.

  • PDF

A Study on the Identification of Hazardous Factors and Prevention of Accident in Old Boilers (노후보일러 유해인자 발굴 및 사고예방에 관한 연구)

  • Sa, Min-Hyung;Woo, In-Sung
    • Journal of the Korean Institute of Gas
    • /
    • v.23 no.4
    • /
    • pp.1-9
    • /
    • 2019
  • Large-scale industrial boilers operating at high temperature and high pressure, have a large amount of water, and a large amount of energy is released at the time of explosion. Currently, most industrial boilers use gas fuel such as LNG and LPG, etc. and fuel exists in the same space as equipment, so there is a high possibility of secondary damage such as fire or explosion in the event of a boiler accident. Both special care and management are required to operate the very dangerous equipment that causes casualty 2.51 per accident. For boilers of a certain size or more, the Korea Energy Agency conducts inspections in accordance with the Energy Usage Rationalization Act, KS, and public notice of the Ministry of Industry, Trade and Resources. In this research, based on the results of the inspection, the hazard factorss are configured, and a questionnaire is conducted to the inspector, the equipment manager, the maintenance person, and the person in charge of the manufacturer. We analyzed the results by using AHP (Analytic Hierarchy Process). As a result of analysis, generally recognized hazard factorss are not good management, measurement failure, specification failure, water leak, leak analysis, but connection, welding, scale, and corrosion, etc. are relatively less important. It is judged that the adverse factors that are recognized to be highly important among all groups and careers are already well managed, but less important and adverse factors should be well managed to ensure that the safe usage of the boiler.

Analysis for Behavior of Rockfall Movement by Cheonbuldong Valley of Seoraksan National Park (설악산국립공원 천불동 계곡에서 발생된 낙석 거동분석)

  • Cho, Yong-Sung;Kim, You-Seong
    • Journal of the Korean Geotechnical Society
    • /
    • v.26 no.5
    • /
    • pp.49-55
    • /
    • 2010
  • The large scale rock falling had occurred on 22nd February, 2007 in the Cheongbuldong valley area of Seoraksan National Park, and the visiting pass had been closed for a while. Similar cases of rock falling have occurred in the latest years according to a great variety of crack, joint, weathering of solid rock and surface water caused by a recent climatic change in the Seoraksan National Park. In this study, rock falling energy was estimated and the movement of rockslide was analysed based on detailed investigation on large scale rockslides occurring at the spot 80 m high from the bottom of the valley. From analysing results, the effective management method for rock falling was proposed. The method could minimized the dangerous factors with no change of natural environment of the National Park.

Comparison of the CO2 Emissions Estimations among Four Tier Methods for the Facilities from Different Industrial Sectors in Korea (국내 산업 부문에 대한 온실가스 배출량 산정 방법 결과 비교)

  • Kim, Hee Jin;Yeo, Min Ju;Kim, Yong Pyo;Jang, Geon Woo;Shin, Won Geun;Lee, Myung Hwoon;Choi, Hyung Wook
    • Journal of Climate Change Research
    • /
    • v.3 no.3
    • /
    • pp.195-209
    • /
    • 2012
  • There are four differentiated levels to quantify the amount of greenhouse gas emissions from a facility, which are Tier 1 to 4 based on the IPCC guidelines. In this study, the emission estimates from all tier levels were calculated to compare their total $CO_2$ emission results among themselves for seven facilities, including three sectors of electricity generation, municipal solid waste incineration, and cement manufacturing for three months between February and May 2011. Generally the measured $CO_2$ emissions by Tier 4 were higher than the calculated $CO_2$ emissions by Tier 3, which had been also observed for the power plants in the USA. It was found out that to obtain more reliable estimation for Tier 3, accurate analysis of the composition of the fuel used should be carried out. It was suggested that further refinement on the administrative guidelines be made to make it more robust.

Study on Estimation Methods of Life Cycle GHGs Emission for the Mine Reclamation Project (광해방지사업의 전과정 온실가스 배출량 산정방법에 대한 연구)

  • Kim, Soo-lo;Kwak, In-Ho;Wie, Dae-Hyung;Park, Kwang-ho;Baek, Seung-Han
    • Economic and Environmental Geology
    • /
    • v.54 no.6
    • /
    • pp.733-741
    • /
    • 2021
  • Globally, in accordance with the goals set forth in the 2015 Paris Climate Agreement, each country has established and declared a reduction target for carbon neutrality by 2050. The roadmaps for establishing long-term greenhouse gas emissions development strategies and setting reduction targets have been announced. As the international community accelerates the transition to the net-zero society, 128 countries have declared net-zero by the end of 2020, and the net-zero declaration continues to expand around G20 member states. In December 2020, Korea announced the "2050 Net-zero Strategy" to establish a foundation for simultaneously achieving carbon reduction, economic growth, and improved quality of life for the people through active response to the net-zero, and pursuing policy tasks in stages to do this. Comprehensive carbon management is insufficient due to the lack of comprehensive carbon management due to the departure from the areas of mandatory reduction, such as the GHG energy target management system and the GHG emissions trading offset system implemented to reduce greenhouse gases in Korea. Currently, there is no cases for estimation or calculation of carbon dioxide emissions for the Mine Reclamation projects. It is reviewed the standard methods proposed by domestic and foreign carbon emission calculation methods and proposed appropriate carbon emission estimation methods for the Mine Reclamation projects in this study.

Investigating the Use of Energy Performance Indicators in Korean Industry Sector (한국 산업부문의 에너지성과 지표 이용에 관한 연구)

  • Shim, Hong-Souk;Lee, Sung-Joo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.707-725
    • /
    • 2021
  • Energy management systems (EnMS) contribute to sustainable energy saving and greenhouse gas reduction by emphasizing the role of energy management in production-oriented economies. Although understanding the methods used to measure energy performance is a key factor in constructing successful EnMS, few attempts have been made to examine these methods, their applicability, and their utility in practice. To fill this research gap, this study aimed to deepen the understanding of energy performance measures by focusing on four energy performance indicators (EnPIs) proposed by ISO 50006, namely the measured energy value, ratio between measured values, linear regression model, and nonlinear regression model. This paper presents policy and managerial implications to facilitate the effective use of these measures. An analytic hierarchy process (AHP) analysis was conducted with 41 experts to analyze the preference for EnPIs and their key selection criteria by the industry sector, and organization and user type. The findings suggest that the most preferred EnPI is the ratio between the measured values followed by the measured energy value. The ease of use was considered to be most important while choosing EnPIs.

Feasibility Analysis on Replacing LED Lighting with Incandescent Bulbs in Public Institution (백열 전구의 LED 조명 교체에 대한 타당성 분석 - 공공기관을 중심으로 -)

  • Park, Youn Mi;Lee, Myung Koon
    • Journal of Climate Change Research
    • /
    • v.1 no.3
    • /
    • pp.205-210
    • /
    • 2010
  • LED light has various advantages such as an energy saving effect of over 80% compared to existing lighting and environmentally friendly characteristics; however, there has been no affordable market for LED lighting because of its expensive price. This study discussed the validity of the expansion of distribution of LED lighting through an assessment of economic efficiency concerning LED lightening in order to analyze its efficiency in terms of energy savings and maintenance and repair, which will be generated as a result of the change from existing incandescent bulbs to LED lighting in the public sector. As to the target of analysis, the paper reviewed the validity of change to LED lighting as a result of the elimination of existing incandescent bulbs, by referring to 'the current incandescent bulb use and elimination performance' published by the Ministry of Knowledge Economy based on the "Elimination management system" executed by Korea Energy Management Corporation. The paper considered expenses for change, annual power savings amount and electric charges savings amount, repair and maintenance cost, $CO_2$ reduction volume, and the profit from the sale of CER (certified emission reduction). As a result of analyzing economic efficiency, when the discount rate during the change of existing incandescent bulb lighting to LED lighting is 3.26%, the profit was 8,648,400,000 won. Accordingly, NPV was analyzed to have a 'positive (+)' value, which means that this change is profitable.

Electrodeless fluorescent Lamp Technology Using High-Frequency Discharges (Linear and Circular Type) (고주파 방전 무전극 형광등 광원 기술 [직관 및 환형])

  • 김진중;고정태;원동호
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2002.11a
    • /
    • pp.9-13
    • /
    • 2002
  • This paper describes the first-year accomplishments in the R'||'&'||'D project entitled, "Electrodeless Fluorescent Lamp Technology Using High-Frequency Discharges (Linear and Circular Type)," supported by a contract from the Korea Energy Management Corporation (KEMCO). One of the most important accomplishments in the prihect is that the luminance of electrodeless fluorescent lamps is increased more than 25% when the hybrid technique of capacitive and inductive couplings is utilized for both linear and circular types of high-frequency discharge fluorescent lamps compared to the case where pure capacitive couplings are used. We present the results of the experiments and the status of the development efforts in the project.t.

  • PDF