• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.9-20
• /
• 2013

Defense M&S for weapons effectiveness is a realistic way to support virtual warfare similar to real warfare. As the war paradigm becomes platform-centric to network-centric, people try to utilize smartphones as the source of sensor, and command/control data in the simulation-based weapons effectiveness analysis. However, there have been limited researches on integrating smartphones into the weapon simulators, partly due to high modeling cost - modeling cost to accomodate client-server architecture, and re-engineering cost to adapt the simulator on various devices and platforms -, lack of efficient mechanisms to exchange large amount of simulation data, and low-level of security. In this paper, we design and implement Smartphone Adaptor to utilize smartphones for the simulationbased weapons effectiveness analysis. Smartphone Adaptor automatically sends sensor information, GPS and motion data of a client's smartphone to a simulator and receives simulation results from the simulator on the server. Also, we make it possible for data to be transferred safely and quickly through JSON and SEED. Smartphone Adaptor is applied to OpenSIM (Open simulation engine for Interoperable Models) which is an integrated simulation environment for weapons effectiveness analysis, under development of our research team. In this paper, we will show Smartphone Adaptor can be used effectively in constructing a Live simulation, with an example of a chemical simulator.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.41-48
• /
• 2016

Edentulous patients with severe alveolar bone resorption have trouble with using traditional complete denture. In order to overcome these problems, implant-retained overdenture was developed. SFI-bar$^{(R)}$ system can save time and cost compared to other existing bar systems which need complicated laboratory procedures because it can be adjusted directly in a patient's mouth. A 55-year-old male, who had experienced a fractured lower old implant-retained overdenture, wanted a durable and painless denture. The fractured Locator$^{(R)}$ attachments were removed and edentulous mandible was restored with SFI-bar$^{(R)}$. A 77-year-old female with a medical history of the Parkinson's disease and severely absorbed alveolar bone of mandible, wanted to wear a retentive mandibular denture without pain. After placing two implants in front of mental foramen, two adaptors were connected to two implants and a tube bar was connected to the adaptors. A female part fitted to the bar was attached to the new denture. These clinical reports describe two-implant-retained overdenture using the SFI-bar$^{(R)}$ system in mandibular edentulous patients. Since the patients were satisfied esthetically and functionally during 2 years' observation, we would like to report cases.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.5
• /
• pp.257-266
• /
• 2006

Recently TCP/IP Offload Engine (TOE) technology, which processes TCP/IP on a network adapter instead of the host CPU, has become an important approach to reduce TCP/IP processing overhead in the host CPU. There have been two approaches to implementing TOE: software TOE, in which TCP/IP is processed by an embedded processor on a network adapter; and hardware TOE, in which all TCP/IP functions are implemented by hardware. This paper proposes a hybrid TOE that combines software and hardware functions in the TOE. In the hybrid TOE, functions that cannot have guaranteed performance on an embedded processor because of heavy load are implemented by hardware. Other functions that do not impose as much load are implemented by software on embedded processors. The hybrid TOE guarantees network performance near that of hardware TOE and it has the advantage of flexibility, because it is easy to add new functions or offload upper-level protocols of TCP/IP. In this paper, we developed a prototype board with an FPGA and an ARM processor to implement a hybrid TOE prototype. We implemented the hardware modules on the FPGA and the software modules on the ARM processor. We also developed a coprocessing mechanism between the hardware and software modules. Experimental results proved that the hybrid TOE prototype can greatly reduce the load on a host CPU and we analyzed the effects of the coprocessing mechanism. Finally, we analyzed important features that are required to implement a complete hybrid TOE and we predict its performance.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.954-959
• /
• 2021

Apoptosis is an important mechanism that regulates cellular populations to maintain homeostasis, and the caspases, a family of cysteine proteases, are key mediators of the apoptosis pathway. Caspase-8 is an initiator caspase of the extrinsic apoptotic pathway, which is initiated by extracellular stimuli. Caspase-8 have two conserved domains, N-terminal tandem death effector domains (DED) and C-terminal two catalytic domain, which are important for this extrinsic apoptosis pathway. In extrinsic apoptosis pathway, death receptors which members of TNF superfamily are activated by binding of death receptor specific ligands from cell outside. After the activated death receptors recruit adaptor protein Fas-associated death domain protein (FADD), death domains (DD) of death receptor and FADD bind to each other and FADD combined with death receptor recruits procaspase-8, a precursor form of caspase-8. The DED of FADD and procaspase-8 bind to one another and FADD-bound procaspase-8 is activated by cleavage of the prodomain. This death receptor-FADD-caspase-8 complex called death inducing signaling complex (DISC). Cellular FLICE-inhibitory proteins (c-FLIPs) regulate caspase-8 activation by acting both anti- and pro-apoptotically, and caspase-8 activation initiates the activation of executioner caspases such as caspase-3. Finally activated executioner caspases complete the apoptosis by acting critically DNA degradation, nuclear condensation, plasma membrane blebbing, and the proteolysis of certain caspase substrates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2022

In order to efficiently analysis the stability of a slope, measuring the shear strength of soil is needed. The Standard Penetration Test (SPT) is not appropriate for a slope inspection due to cost and weights. One of the ways to effectively measure the N-value is the Dynamic Cone Penetration Test (DCPT). This study was performed to develop a minimized multi-function sensors that can easily estimate CPT values and Volumetric Water Content. N value with multi-fuction sensor DCPT showed -2.5 ~ +3.9% error compared with the SPT N value (reference value) in the field tests. Also, the developed multi-fuction sensor system was tested the correlation between the CPT test and the portable tester with indoor test. The test result showed 0.85 R2 value in soil, 0.83 in weathered soil, and 0.98 in mixed soil. As a result of the field test, the multi-function sensor shows the excellent field applicability of the proposed sensor system. After further research, it is expected that the portable multi-function sensor will be useful for general slope inspection.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.1-10
• /
• 2022

Defense fields widely operate unmanned systems to lower vulnerability and enhance combat effectiveness. In the navy, swarm unmanned surface vehicles(USVs) form a cluster within communication range, share situational awareness information among the USVs, and cooperate with them to conduct military missions. This paper proposes an interface system, i.e., Interface Adapter System(IAS), to achieve inter-USV and intra-USV interoperability. We focus on the mission planning subsystem(MPS) for interoperability, which is the core subsystem of the USV to decide courses of action such as automatic path generation and weapon assignments. The central role of the proposed system is to exchange interface data between MPSs and other subsystems in real-time. To this end, we analyzed the operational requirements of the MPS and identified interface messages. Then we developed the IAS using the distributed real-time middleware. As experiments, we conducted several integration tests at swarm USVs simulation environment and measured delay time and loss ratio of interface messages. We expect that the proposed IAS successfully provides bridge roles between the mission planning system and other subsystems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.711-719
• /
• 2011

A study of miniaturization of an L-band orthomode transducer(OMT) for field experiments of radar backscatter is presented in this paper. The proposed OMT is not required the additional waveguide taper structures to connect with a standard adaptor by the newly designed junction structure which bases on a waveguide taper. Total length of the OMT for L-band is about 1.2 ${\lambda}_o$(310 mm) and it's a size of 60 % of the existing OMTs. And, to increase the matching and isolation performances of each polarization, two conducting posts are inserted. The bandwidth of 420 MHz and the isolation level of about 40 dB are measured in the operating frequency. The L-band scatterometer consisting of the manufactured OMT, a horn-antenna and network analyzer(Agilent 8753E) was used STCT and 2DTST to analysis the measurement accuracy of radar backscatter. The full-polarimetric RCSs of test-target, 55 cm trihedral corner reflector, measured by the calibrated scatterometer have errors of -0.2 dB and 0.25 dB for vv-/hh-polarization, respectively. The effective isolation level is about 35.8 dB in the operating frequency. Then, the horn-antenna used to measure has the length of 300 mm, the aperture size of $450{\times}450\;mm^2$, and HPBWs of $29.5^{\circ}$ and $36.5^{\circ}$ on the principle E-/H-planes.