• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.218-224
• /
• 2007

Although piezoelectric materials such as PZT have been widely used as actuators in the field of active vibration suppression, the use of bare PZT as an actuator may cause some drawbacks such as critical breaks in the installation process, short circuits in the host material and low fatigue performance. The LIPCA-C2 (lightweight piezocomposite actuator) was developed to alleviate these problems. We implemented the LIPCA as an actuator to suppress the vibration of an aluminum cantilever beam with a tip mass. In our test, we used positive position feedback control algorithm. The filter frequency for this type of feedback should be tuned to the natural frequency of the target mode. The first three experimental natural frequencies of the aluminum cantilever beam agree well with the results of finite element analysis. The effectiveness of using the LIPCA as an actuator in active vibration suppression was investigated with respect to the time and frequency domains, and the experimental results show that LIPCAs with PPF control can significantly reduce the amplitude of forced vibrations and the settling time of free vibrations. For a case study, the forced vibration control of several beams with different thicknesses were performed.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.75-79
• /
• 1999

The beam patterns of source array and changes in the far-field signatures are compared and analyzed each other in order to identify the seismic capability affected by the misfired source at the multi-channel seismic source array. In the primary pulse amplitude of far-field signature, the 66% of seismic capacity are sustained if approximately 40% of source are misfired among whole gun volume. When the sources with the same distances are misfired at the 154㎐, the beam width of the long- and wide-array which is identical regardless of arraying pattern. The beam width has a tendency to narrow now from 41 to 34 according to increase the volume of misfired source at the long-array beam pattern. Therefore, the source array of small volume are suitable for the shallow seismic survey because of producing adequate beam patterns with narrow beam width.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.38-42
• /
• 2000

Plasma polymerized thin films were manufactured inter-electrode coupled plasma polymerization apparatus. The deposition rate reached its maximum between 40[W] and 100[W]. In the ESCA analysis, peaks revealing -CH2, -CH, -C- were present at 285.4 and 285.5[eV] respectively. The C=O peak at 532.8[eV] and the C-O peak at 533.8[eV], which were grouped with an unignorable amount of oxygen were conformed. In ESR analysis, the curve revealing strong amplification was in saturation, which was affected by weak power. This is considered as a -CH-Ch=Ch- structure containing the Allyl group. The relative permittivity of the plasma polymerized thin films was about 3.5 at a frequency of 100[Hz]∼200[kHz]. The dissipation factor showed allow value of 0.008.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.213-219
• /
• 2003

Acoustic emission behavior during fatigue crack growth test was investigated under various loading condition. To describe the acoustic emission activity, counts rate (d/dn) was related with SIFR (stress intensity factor range, K). Results indicated that SIFR could be divided into two parts according to its relationship with counts rate. For $K<25_{MPa\sqrt{m}}$, counts rate was increased as the SIFR increased. However, for values greater than $25_{MPa\sqrt{m}}$ , decreasing behavior was shown. This behavior of counts rate corresponding SIFR was keeping the same trend regardless of load range or crack length. Acoustic emission response to the single overload was sudden drop and slow recovery in counts rate like crack growth retardation. Under variable loading condition, counts rate of each loading block was same as that of constant amplitude loading. Overall experimental data was somewhat scattered since sensitive characteristics of acoustic emission method. However, these empirical relations indicated that counts rate was uniquely correlate with single parameter, SIFR.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.117-124
• /
• 1983

In rough seas, actual behaviours of a ship may not be estimated by the linear strip theory, because of Nonlinearities due to the hull shape, bottom slamming and bottom and/or bow-flare slamming. In case of slamming, impulsive hydrodynamic pressure occurs on the fore body surface of the ship, resulting hull vibration called whipping, by which the ship may suffer from serious structural damages and the impact pressure, depends critically on the relative velocity at re-entry. In this paper, the Time history of impact froce at each station, the longitudinal distribution of impact force at critical time, the Time history of acceleration at F.P. and the Time history of Bending moment at midship are illustrated. That is, authors analyzed Dynamic response of container ship to be subjected slamming impact force.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.373-384
• /
• 1989

The motions of a spinning rotor and a fluid enclosed in its cavity are known to have mutual interactions, which change the frequencies of forced vibrations and cause instabilities. These phenomena are of technical importance for fluid-cooled turbines as well as spin-stabilized satellites or rockets containing liquid fuels. In this paper the characteristics of unstable whirling of a rotor containing a partitioned cavity filled with two kinds of liquids are investigated experimentally. It studies the influence of rotational speed and filling ratio of two kinds of liquids on unstable whiring. As a result, it is found that the whirl velocity is approximately equal to, or slightly lower for large masses of trapped fluid than rotor critical speed. In case of a spinning rotor partially filled with two kinds of liquids the boundary surface plays a similar role to the free surface, and cases unstable forward whirl.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.733-753
• /
• 1994

Monthly mean sea levels from 103 tidal stations in Korea, Japan, and Russia are analyzed to study long-period sea level variations. Barometric adjustment are done for all the sea level data, using monthly air pressures at sea levels from meteorological stations near tidal stations. Seasonal variation is dominant in most of study area. It is the largest in the coasts along the Tsushima Current, and the smallest in the Russian coasts. The cross-correlations of seasonal variations are very high between the coasts along the Tsushima Current. In these marginal seas, seasonal variations seem to be related with the Tsushima Current. The phase of seasonal variations is generally getting late from south to north, and also from west to east. On the other hand, longer-period variations(longer than seasonal variation) have the largest amplitudes and the earliest phases in the coasts along the Pacific Ocean, which shows that they propagate from the Pacific Ocean. Shorter-period variations (shorter than seasonal variation) have generally lower cross correlations. Their values do not show any dictinct difference between areas, and show a common tendency that they are inversely proportional to distance. It implies that the shorter period waves are generated all over the study areas, and propagate in all the directions with faster dissipations. The trends of sea levels in the study area are generally negative in the coasts along the Pacific Ocean and positive in the other areas during the period of 1965 to 1985. By the trends, the mean volume transport between Cheju and Sasebo can be reduced by about 1 Sv during the period. The seasonal variation of volume transport obtained by sea level difference is about 2 Sv in the Korea Strait. The values are comparable to previous reports.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.343-349
• /
• 2004

Electroglottograph(EGG) is a signal recorded from the vocal cord vibration by measuring electrical impedance across the vocal folds through the neck skin. The purpose of this study was to develop EGG system and to evaluate possibility for the application on speech analysis and laryngeal disease diagnosis. EGG system was composed of two pairs of ring electrodes, tuned amplifier, phase sensitive detector, low pass filter, and auto-gain controller. It was designed to extract electric impedance after detecting by amplitude modulation method with 2.7MHz carrier signal. Extracted signals were transmitted through line-in of PC sound card, sampled and quantized. Closed Quotient(CQ), Speed Quotient(SQ), Speed Index(SI), fundamental frequency of vocal cord vibration(F0), pitch variability of vocal fold vibration (Jitter), and peak-to-peak amplitude variability of vocal fold vibration(Shimmer) were analyzed as EGG parameters. Experimental results were as follows: the faster vocal fold vibration, the higher values in CQ parameter and the lower values in SQ and SI parameters. EGG and speech signals had the same fundamental frequency. CQ, SQ, and SI were significantly different between normal subjects and patients with laryngeal cancer. These results suggest that it is possible to implement portable EGG system to monitor the function of vocal cord and to test functional changes of the glottis.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.1-12
• /
• 1997

The western equatorial Pacific Ocean, where sea surface temperature is the warmest on the globe, is characterized by numerous convective systems and large annual precipitation. In this region, the cloudiness data with tops higher than 8km level obtained from the GMS-IR data are used to investigate the diurnal variation of cloudiness. The amplitude and phase of diurnal and semi-diurnal cycles are mainly investigated to examine details on the temporal and spatial structure of clouds. Cloudiness variation has typical cycles and each cycle is associated with the air-sea interactive phenomena. Spectral analysis on the cloudiness time series data indicates that 30-60 day, 17-20day, 7-8 day, diurnal and semi diurnal cycle are peaked. During Northern Winter and Southern Summer, the large cloudiness exsists over New Guinea, the adjacent seas of North Australia, and the open oceanic regions east of $160^{\circ}$E. Cloudiness diurnal variability over the lands and their adjacent seas is about 2.0 times larger than that over the open sea regions. That may be due to the difference of specific heat between the land and sea. The maximum and minimum cloudiness appeared at 18:00 and 09:00 hours over the land, and at noon and 21:00 hours over the sea, respectively. The amplitude of diurnal component over the land is 4,7 times larger than that of semi-diurnal component, and 1.5 times over the sea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11C
• /
• pp.1083-1090
• /
• 2005

This paper presents the design of a video encoder for the device of need TV-OUT function. The designed video encoder satisfies the standard conditions of International Telecommunication Union-Radiocommunication (ITU-R) BT.470. ITU-R BT.470 can be classified as NTSC, PAL or SECAM. NTSC and PAL use Amplitude Modulation (AM) to transmit color difference signals and SECAM uses Frequency Modulation (FM). SECAM must have an antic-cloche filter but the filter recommended by ITU-R BT.470 is not easy to design due to sharpness of the frequency response. So formerly the filter was designed as analog. This paper proposes that the filter is designed as digital and the special quality of the filter is transformed easy to design. And the modulation method is modified to be identical with the result required at standard. The encoder can control power consumption by output mode to apply mobile phone, mobile devices, etc. The proposed encoder is experimentally demonstrated with ALTERA FPGA APEX20KE EP20K1000EBC652-3 device and SAMSUNG LCD-TV.