• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.87-96
• /
• 2014

The objectives of this study were to characterize the physicochemical properties and mineralogy of Hwangto (yellow residual soils) from the southwestern part of Korea and to understand the soil-forming processes of the residual soils from their parent rocks. Both the yellowish residual soils as well as the unweathered and weathered parent rocks were obtained from Jangdong-ri, Donggang-myun, Naju, Jeollanam-do, Korea. The soil samples were examined to analyze the said soil's physicochemical properties such as color, pH, and particle size distribution. A scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis were performed in order to understand the mineralogy, chemical composition, and morphology of the soils. Two thin sections of a parent rock were analyzed to study its mineral composition. A particle size analysis of the soils indicates that the residual soil consists of mainly silt and clay (approximately 95%) and that soil textures are silty clay or silt clay loam. The soil colors of the residual soil are dark brown (7.5YR 3/4) through yellowish red (5YR 4/6). The pH of the residual soil ranges from 4.3 to 5.1. The major minerals of the parent rocks were quartz, biotite, chlorite, and plagioclase. The mineralogy of the sand fraction of the residual soil was quartz, biotite, muscovite and sanidine. The mineralogy of the silt fraction of the residual soil was quartz, biotite, muscovite, Na-feldspar, K-feldspar, and sanidine. The clay mineralogy of the soil was goethite, kaolinite, ilite, hydroxy-interlayed vermiculite(HIV), vermiculite, mica, K-feldspar and quartz. The mineral composition of the residual soil and the parent rock indicates that feldspar and mica in the parent rock weathered into illite, vermiculite and hydroxy-interlayed vermiculite(HIV), and finally changed into kaolinite and halloysite in the yellowish residual soils.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.481-488
• /
• 1999

Background: The routine application of the combined regimen of corticosteroid-antituberculosis therapy to the tuberculous pleurisy remains controversial. Steroid therapy to tuberculous pleurisy could be effective on the acceleration of absorption of pleural effusion and symptom improvement, but there has been debate about the effect of prednisolone on the prevention of pleural adhesion. So we studied the efficacy of combined regimen of prednisolone-antituberculosis therapy on the absorption of pleural effusion and prevention of pleural adhesion. Method: A prospective, randomized study was performed in 82 patients, 50 patients(non-steroid group) were treated with only antituberculosis regimen for 6 months and in 32 patients(steroid group) prednisolone(30mg/day) were administered in addition to antituberculosis regimen for one months and tapered for another month. The amount of pleural effusion was compared at the beginning of treatment, 2nd month, 6th month and final visit with chest X-ray findings which were graded from grade 0(complete absorption) to grade 6(near total haziness). Results: The amount of pleural effusion of steroid group at 2nd month, 6th month and final visit was lesser than that of non-steroid group(P<0.05). The incidence of the complete absorption of the pleural effusion was 3/32(9.4%) in steroid group, 1/50(2%) in non-steroid group at 2nd month after treatment; and 12/32(37.5%) in steroid group, 6/50(12%) in non-steroid group at 6th month after treatment(P<0.05). At final observation, the incidence of residual pleural thickening was 15/32(47%) in steroid group and 37/50(74%) in non-steroid group(P<0.05). No serious side effects were noted during the treatment with prednisolone. Conclusion: The administration of prednisolone in conjunction with antituberculosis chemotherapy improved the absorption of pleural effusion and decreased the residual pleural thickening.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.62-72
• /
• 1998

This study was performed to characterize the trace organic pollutants in the industrial wastewater and to establish the database of the trace organic pollutants. The four manufacturing industries, which are refined petroleum, industrial chemicals, rubber & plastics and fabricated metals, were surveyed. The wastewater and discharging water of these 30 factories are analyzed to characterize the trace organic pollutants. In industrial chemicals, the kinds of products and organic pollutants are very various. Therefore to select the characteristic organic pollutants in this categories are also very difficult. In industrial chemicals, the gas chromatograpic peak patterns of wastewater are represented the various type according to their products, therefore the typical patterns of the characteristic organic pollutants could not be obtained because the kinds of manufactured goods and organic pollutants are very various. In refined petroleum, the effluent is discharged in the distillatory process of atmosphere pressure and contained the saturated hydrocarbons, phenol compounds, benzene compounds and naphtalene compounds. The saturated hydrocarbons peaks from $C_{15}$ to $C_{35}$ are represented the typical oil patterns by the uniform intervals therefore the peak can be easily distinguished. In rubber & plastics, the wastewater is discharged in the washing process which contains the additives. The problem of wastewater is not serious because the manufacturing process is not produced the effluent or the produced cooling water is recycled in that process.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.157-166
• /
• 1990

Data are presented concerning the effect of different seasons and sexes during the growing period on broiler performance. Total 38, 451 broiler chickens were raised in spring summer and winter and they were marketed at 6 or 7 weeks of age. Birds were alloted to 118 groups (240∼360 birds per pen) and weighted at termination in order to determine variation in several economic traits between the sex groups. The results obtained were summarized as follows ： 1. The rate of livability of the females were higher than that of the males in all seasons (P＜0.01). 2. Body weights of males were heavier than that of females by 17.4％ at 6 wks, and 19.1％ at 7 wks of age and by 18.0∼19.6％ ,17.6∼18.4％ , and 19.6∼19.3％ in spring, summer, and winter, respectively (P＜0.01). 3. Males consumed more feed than females by 13.3∼135％ . And same trends was noted by season ： 11.7∼13,5％ in spring 175∼15.0％ in summer, and 11.5∼13.0％ in winter. 4. Peed requirement of the females was less than that of the males ： by 5.0∼7.1％, 5.9∼1.0％ , and 5.4∼5.5％ in spring, summer, and winter, respectively (P＜ 0,01). 5. The correlation coefficients between body weight and feed intake in spring were 0.81∼0.87 in males, and 0.84∼0.88 in females and those between body weight and feed requirements were ∼052∼0.51 in males, and -0.17∼-0.45.45 in females. 6. In summer the correlation coefficients between livability and body weight were -0.1∼-0.37 in males, and -0.36∼-0.51 in females, those between body weight and feed intake were 0.66∼0.77 in males, and 0.5∼0.82 in females, and those between body weight and feed requirement were -0.42∼-022 in males, and 0.24∼-0.001 in females. 7. In winter the correlation coefficients between livability and body weight were -0.02∼0.02 in males, -0.18∼-0.19 in females, those between body weight and feed requirements were -0.08∼02 in males, and 0.04∼0.09 in females.

• Journal of Life Science
• /
• v.26 no.2
• /
• pp.226-233
• /
• 2016

Vascular smooth muscle cell (VSMC) apoptosis has been identified in various vascular diseases, including atherosclerosis and restenosis after angioplasty, and has been known to precipitate atherosclerotic plaque instability and rupture. Oxysterols are known as inducers of apoptosis in VSMC, and 7-ketocholesterol (7KC) is the major nonenzymically formed oxysterol in atherosclerotic lesions. The precise mechanism underlying VSMC apoptosis is still poorly understood. In this study, we investigated whether 7KC causes apoptosis, and characterized its apoptotic mechanisms in primary cultured rat aortic VSMC. Cell viability was assessed by MTT assay and trypan blue assay. Apoptosis was assessed by flow cytometry, immunofluorescence, immunoprecipitation, and Western blot analyses. 7KC markedly decreased the VSMC viability in a time- and concentration-dependent manner, and increased the production of 4-hydroxynonenal (HNE), a major end-product of lipid peroxidation, which also decreased the VSMC viability. Pretreatment with 2,4-dinitrophenylhydrazine, a well-known reagent of lipid peroxidation-derived aldehydes, significantly restored the 7KC-decreased viability of VSMC. Furthermore, HNE, as well as 7KC, reduced the level of total Akt, a major mediator of cell survival. The 7KC-decreased level of total Akt was significantly restored by pretreatments with 2,4-dinitrophenylhydrazine and N-acetylcysteine. Lactacystin, a proteasome inhibitor, protected VSMC against apoptosis and Akt degradation, but did not inhibit HNE production. In the immunoprecipitation assay, 7KC increased HNE-modified Akt. From the results, it seems that, in atherosclerotic lesions, 7KC induces HNE production in VSMC, and this HNE binds to Akt, proceeding to proteasomal degradation of Akt, through which mechanism the atherosclerotic plaque instability may be facilitated.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.606-612
• /
• 2022

Relatively high indoor CO₂ concentration (>1,000 ppm) has a negative impact on human health. In this work, indoor CO₂ adsorbent was developed by impregnating KOH or K₂CO₃ on commercial activated carbon, named as KOH/AC and K₂CO₃/AC. Commercial activated carbon (AC) showed relatively high BET surface area (929 m²/g) whereas KOH/AC and K₂CO₃/AC presented lower BET surface area of 13.6 m²/g and 289 m²/g. Two experimental methods of TGA (2,000 ppmCO₂, weight basis) and chamber test (initial concentration: 2,000 ppmCO₂, CO₂ IR analyzer) were used to investigate the adsorption capacity. KOH/AC and K₂CO₃/AC exhibited similar adsorption capacities (145~150 mg_CO2/g), higher than K₂CO₃/Al+Si supports adsorbent (84.1 mg_CO2/g_sample). Similarly, chamber test also showed similar trend. Both KOH/AC and K₂CO₃/AC represented higher adsorption capacities (KOH/AC: 93.5 mg_CO2/g K₂CO₃/AC: 94.5 mg_CO2/g_sample) K₂CO₃/Al+Si supports. This is due to the KOH or K₂CO₃ impregnation increased alkaline active sites (chemical adsorption), which is beneficial for CO₂ adsorption. In addition, the regeneration test results showed both K-based adsorbents pose a good regeneration and reusability. Finally, the current study suggested that both KOH/AC and K₂CO₃/AC have a great potential to be used as CO₂ adsorbent for indoor CO₂ adsorption.