• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.651-659
• /
• 2014

In this paper, we consider a two way relay network for ship-to-ship communications in a fleet, where two communicating ships exchange the information with the help of a multi-antenna relay ship. For the network, we propose a rate-aware three-phase analog network coding to improve the reliability of the information exchange with asymmetric rates. The proposed scheme allows low-complex implementation of the relay without channel estimation by generating an improved analog network coded signal with the orthogonally received signals from two ships by using only the received signal power at each antenna. In addition, the proposed scheme reduces outages in the data exchange at asymmetric rates by adopting a rate-aware relay power allocation, which is confirmed by evaluating the outage performance via simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1438-1443
• /
• 2016

In this paper, we investigate the effect of multiple antennas at a relay node on the performance of physical-layer network coding (PNC) in the two-way relay channel (TWRC). We assume that two source nodes have a single antenna and the relay node has multiple antennas. We extend the conventional TWRC environment with a signle antenna at both relay and source nodes to the case of multiple antennas at the relay node. In particular, we consider two decoding strategies: separate decoding (SD) and direct decoding (DD). The SD decodes each packet from the two sources and performs the network coding with bit-wise exclusive OR (XOR) operation, while the DD decodes the network-coded packet from the two sources. Note that both decoding strategies are based on log-likelihood ratio (LLR) computation. It is shown that the bit error rate (BER) performance becomes significantly improved as the number of antennas at the relay node.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.867-869
• /
• 2012

FRUC(Frame Rate Up Conversion) is core techniques for higher quality terminals or low channel rate. For these applications, in this paper, we propose a block-based reliability evaluation method for FRUC techniques using bi-lateral symmetrical motion estimation. First, in order to measure the reliability, by introducing cost evaluation tools such as motion vector consistency as well as temporal matching and spatial matching characteristics and then by combining these tools, we propose an efficient method which arrange the blocks according to distortion size. Through several simulations, it is shown that the proposed method is very effective in finding the high distortion blocks. Furthermore, it is expected that the proposed method can be effectively utilized in FRUC techniques and Distributed Video Coding technologies.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.464-473
• /
• 2001

Since DCT algorithm divides an image into blocks uniformly in both the spatial domain and the frequency domain, it has a weak point that it can not reflect HVS(Human Visual System) efficiently To avoid this problem, we propose a new algorithm, which combines only the merits of DCT and wavelet transform. The proposed algorithm uses the high compaction efficiency of DCT, and applies wavelet transform mode to DCT coefficients, so that the algorithm can utilize interband and intraband correlations of wavelet simultaneously After that, the proposed algorithm quantizes each coefficient based on the characteristic of each coefficient's band. In terms of coding method, the quantized coefficients of important DCT coefficients have symmetrical distribution, the bigger that value Is, the smaller occurrence probability is. Using the characteristic, we propose a new still image coding algorithm of symmetric and bidirectional tree structure with simple algorithm and fast decoding time. Comparing the proposed method with JPEG, the proposed method yields better image quality both objectively and subjectively at the same bit rate.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.498-512
• /
• 2010

Intra coding is an indispensable coding tool since it can provide random accessibility as well as error resiliency. However, it is the problem that intra coding has relatively low coding efficiency compared with inter coding in the area of video coding. Even though H.264/AVC has significantly improved the intra coding performance compared with previous video standards, H.264/AVC encoder complexity is significantly increased, which is not suitable for low bit rate interactive services. In this paper, a Voting-based Intra Mode Bit Skip (V-IMBS) scheme is proposed to improve coding efficiency as well as to reduce encoding time complexity using decoder-side prediction. In case that the decoder can determine the same prediction mode as what is chosen by the encoder, the encoder does not send that intra prediction mode; otherwise, the conventional H.264/AVC intra coding is performed. Simulation results reveal a performance increase up to 4.44% overall rate savings and 0.24 dB in peak signal-to-noise ratio while the frame encoding speed of proposed method is about 42.8% better than that of H.264/AVC.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.625-632
• /
• 2004

Since the H.264 encoding adopts both forward prediction and hi-direction prediction modes and exploits Variable Length Coding(VLC), the amount of data generated from video encoder varies as Flaying time goes by. The fixed bit rate encoding system which has limited transmission channel capacity uses a buffer to control output bitstream It's necessary to control the bitstream to maintain within manageable range so as to protect buffer from overflow or underflow. With existing bit amount control algorithms, the $\lambda_{MODE}$ which is relationship between distortion value and quantization parameter often excesses normal value to end up with video error. This paper proposes an algorithm to protect buffer from overflow or underflow by introducing a new quantization parameter against distortion value of H.264 video data. The test results of 6 exemplary data show that the proposed algorithm has the same PSNR as and up to 8% reduced bit rate against existing algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.242-243
• /
• 2010

Reducing compression artifacts such as ringing and blocking is one of important issues to improve a visual quality of a JPEG compressed image. In this paper, we propose a new post processing technique based on bilateral filtering (BF), which is one of the techniques that are used to reduce compression artifacts. An important issue with the application of the BF is the selection of the filter parameters, which affects the result significantly. In this work, we suggest a new method to select the filter parameter automatically. In addition to artifact reduction using the BF, a contrast enhancement is performed to overcome the contrast loss problem due to compression. The experimental result shows that the proposed approach can alleviate the artifacts efficiently.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.785-790
• /
• 2019

In this paper, a new bilateral frame rate up-conversion algorithm using adaptive overlapped block motion compensation is proposed. In this algorithm, the adaptive overlapped block motion compensation is based on the motion complexity of the reference region. As the motion complexity is determined by the size of the previously coded motion estimation prediction, the overlapped block motion compensation method is selected without any additional computational complexity. Experimental results show that the proposed algorithm provides better image quality than conventional methods both objectively and subjectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.438-446
• /
• 2013

Generally, a camera isn't located at the center of display in a tele-presence system and it causes an incorrect eye contact between speakers which reduce the realistic feeling during the conversation. To solve this incorrect eye contact problem, we newly propose an intermediate view reconstruction algorithm using both a color camera and a depth camera and applying for the depth image based rendering (DIBR) algorithm. In the proposed algorithm, an efficient hole filling method using the arithmetic mean value of neighbor pixels and an efficient boundary noise removal method by expanding the edge region of depth image are included. We show that the generated eye-contacted image has good quality through experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2131-2139
• /
• 2014

In this paper, a binary-coded physical-layer network coding (PNC) is considered when high-order modulation techniques are used at source nodes in wireless communication environments. In the conventional PNC schemes, tight power control and phase compensation are required at a relay node. However, they may not be feasible in practical wireless communication environments. Thus, we do not assume the pre-equalization in this paper, and we only utilize the channel state information at receiver (CSIR). We propose a signal detection method for the binary-coded PNC with high-order modulation, such as QPSK and 16QAM, at the source nodes, while the conventional scheme only consider the BPSK at source nodes. We also analyze the bit-error performance of the proposed technique in both uncoded and coded cases.