• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.265-272
• /
• 2014

Purpose : To reduce the radiation dose to the thyroid that is affected to scattered radiation, the shield was used. And we evaluated the shielding effect for the thyroid during whole brain radiation therapy. Materials and Methods : To measure the dose of the thyroid, 300cGy were delivered to the phantom using a linear accelerator(Clinac iX VARIAN, USA.)in the way of the 6MV X-ray in bilateral. To measure the entrance surface dose of the thyroid, five glass dosimeters were placed in the 10th slice's surface of the phantom with a 1.5 cm interval. The average values were calculated by measured values in five times each, using bismuth shield, 0.5 mmPb shield, self-made 1.0 mmPb shield and unshield. In the same location, to measure the depth dose of the thyroid, five glass dosimeters were placed in the 10th slice by 2.5 cm depth of the phantom with a 1.5 cm interval. The average values were calculated by measured values in five times each, using bismuth shield, 0.5 mmPb shield, self-made 1.0 mmPb shield and unshield. Results : Entrance surface dose of the thyroid were respectively 44.89 mGy at the unshield, 36.03 mGy at the bismuth shield, 31.03 mGy at the 0.5 mmPb shield and 23.21 mGy at a self-made 1.0 mmPb shield. In addition, the depth dose of the thyroid were respectively 36.10 mGy at the unshield, 34.52 mGy at the bismuth shield, 32.28 mGy at the 0.5 mmPb shield and 25.50 mGy at a self-made 1.0 mmPb shield. Conclusion : The thyroid was affected by the secondary scattering dose and leakage dose outside of the radiation field during whole brain radiation therapy. When using a shield in the thyroid, the depth dose of thyroid showed 11~30% reduction effect and the surface dose of thyroid showed 20~48% reduction effect. Therefore, by using the thyroid shield, it is considered to effectively protect the thyroid and can perform the treatment.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2017

Objectives: The purpose of this study was to evaluate the error of the leaf position accuracy of the MLC due to the gravity effect according to the gantry angle by using picket fence test using EPID and GafChromic EBT3 film. Materials and Methods: A 5 cm solid phantom was placed on the table and the SAD was set to 100 cm. The EBT3 film was placed exactly over the solid phantom and covered a 1.5 cm solid phantom and the picket fence test was performed. The EPID was measured under the same conditions as the EBT3 film at SID 100 cm. The gantry angles were measured at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$ in order to evaluate the position of the MLC according to the gantry angle. For the geometric evaluation of the MLC, the leaf position accuracy of the MLC was analyzed using the analysis program. Results: In case of EPID, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.18 mm, 0.31 mm, 0.20 mm, 0.26 mm on the average and the maximum values of the errors were respectively 0.44 mm, 0.54 mm, 0.34 mm, 0.44 mm. In case of EBT3 film, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.19 mm, 0.21 mm, 0.19 mm, 0.31 mm on the average and the maximum values of the errors were respectively 0.35 mm, 0.45 mm, 0.36 mm, 0.48 mm. Conclusion: In this study, we analyzed the position error of the leaf of the MLC according to the gantry angle, and confirmed the position error of the leaf by gravity effect. As a result of comparing the leaf position accuracy using EPID and EBT3 film according to the variation of gantry angle, a larger error occurred in the error analysis method using EPID than that of EBT3 film. Therefore, in the case of IMRT based on MLC, as well as verification of accurate dosimetry should be conducted, it is considered that the quality control and verification for the precise operation of the MLC will be needed. and it is necessary to compare and verify the method of analysis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.47-55
• /
• 2016

To evaluate the position accuracy of the MLC. This study analyzed the variations of the dosimetric leaf gap(DLG) and MLC transmission factor to reflect the location of the MLC leaves according to the dose rate variation for dynamic IMRT. We used the 6 MV and 10 MV X-ray beams from linear accelerator with a Millennium 120 MLC system. We measured the variation of DLG and MLC transmission factor at depth of 10 cm for the water phantom by varying the dose rate to 200, 300, 400, 500 and 600 MU/min using the CC13 and FC-65G chambers. For 6 MV X-ray beam, a result of measuring based on a dose rate 400 MU/min by varying the dose rate to 200, 300, 400, 500 and 600 MU/min of the difference rate was respectively -2.59, -1.89, 0.00, -0.58, -2.89%. For 10 MV X-ray beam, the difference rate was respectively ?2.52, -1.69, 0.00, +1.28, -1.98%. The difference rate of MLC transmission factor was in the range of about ${\pm}1%$ of the measured values at the two types of energy and all of the dose rates. This study evaluated the variation of DLG and MLC transmission factor for the dose rate variation for dynamic IMRT. The difference of the MLC transmission factor according to the dose rate variation is negligible, but, the difference of the DLG was found to be large. Therefore, when randomly changing the dose rate dynamic IMRT, it may significantly affect the dose delivered to the tumor. Unless you change the dose rate during dynamic IMRT, it is thought that is to be the more accurate radiation therapy.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.39-52
• /
• 2007

Quantitative analysis on release behavior of the $^{85}Kr\;and\;^{14}C$ fission gases from the spent fuel material during the voloxidation and OREOX process has been performed. This thermal treatment step in a remote fabrication process to fabricate the dry-processed fuel from spent fuel has been used to obtain a fine powder The fractional release percent of fission gases from spent fuel materials with burn-up ranges from 27,000 MWd/tU to 65,000 MWd/tU have been evaluated by comparing the measured data with these initial inventories calculated by ORIGEN code. The release characteristics of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation process at $500^{\circ}C$ seem to be closely linked to the degree of conversion efficiency of $UO_2\;to\;U_3O_8$ powder, and it is thus interpreted that the release from grain-boundary would be dominated during this step. The high release fraction of the fission gas from an oxidized powder during the OREOX process would be due to increase both in the gas diffusion at a temperature of $500^{\circ}C$ in a reduction step and in U atom mobility by the reduction. Therefore, it is believed that the fission gases release inventories in the OREOX step come from the inter-grain and inter-grain on $UO_2$ matrix. It is shown that the release fraction of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation step would be increased as fuel burn-up increases, ranging from 6 to 12%, and a residual fission gas would completely be removed during the OREOX step. It seems that more effective treatment conditions for a removal of volatile fission gas are of powder formation by the oxidation in advance than the reduction of spent fuel at the higher temperature.

• Journal of the Korean Society of School Health
• /
• v.7 no.1
• /
• pp.45-55
• /
• 1994

The purpose of this study is to contribute to improvement of educational environment by analysing all problems related to environment around the school. To accomplish this purpose, this study was carried out by examining the problems in controlling the areas required for cleanup with 220 teachers in charging the cleanup duties of the primary and secondary schools in Taegu between June 1 and July 15, 1993 and by actually surveying the prejudical business stores around 72 primary schools between August 10 and September 20, 1993. Although most teachers answered to the questionnaires that it is necessary to cleanup the bad environment around the school, the duties of its cleanup tend not to be considered as an important matter. The teachers considered that the most prejudical business store around the school is totally the game room, and in such order as comic books' store, liquor selling shop and causing noise and pollution. 57.3% of total respondents answered that the present cleanup movements have resulted in failure mostly because of both supervising authorities' careless promotion and store owners' excessive commercial transactions. The result of actual survey in environmental and sanitary cleanup area around 72 primary schools showed that the greatest number of 1,258 prejudical stores was the video tapes shop, and then in such order as lodgings, and game rooms, while the number of prejudical store by the schools was 17.5 stores per school on the average which showed a various distribution from zero to 77 places. In general, these prejudical stores were mainly located around the schools in Jung-gu and Seo-gu areas. In addition, it was shown that the more the number of students, the more the number of the prejudical stores. In order to improve the environment around the school, it is necessary to strictly carry out the zoning system relating to the usage of land, to strongly restrict the stores without permit and abnormal stores and to establish the basis asking the city development authorities to go through the environmental evaluation. Moreover, it is absolutely required to make efforts to establish the national right sense of education, and to closely cooperate with the related authorities.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.14-30
• /
• 2020

This study focuses on the fact that pictorial maps in the late Joseon Dynasty were conceptual diagrams with the place names perceived by the people at the time of their production. In this regard, targeting on five pictorial maps, the humanistic landscape characteristics of Pyongyang, which had cultural identities such as a historically old, commercial, and Pungnyu(appreciation for the arts) city, were derived as follows. First, the historic legitimacy of Pyongyang Castle was represented by ritual and religious facilities. They include 'Dangunjeon' and 'Gijagung' related to the nation founder, 'Munmujeong': the remains of Goguryeo, 'Sajikdan' & 'Pyongyanggangdan': the place of the national rites, Hyanggyo and Seowon: education & rite functions, Buddhism and Taoist facilities, 'Yongsindang', 'Sanshindang', and 'Jesindan': folk religion facilities. Gija-related facilities, which became symbols of Pyongyang due to the importance of Small-Sinocentrism and Gija dignity tendency, were distributed throughout Pyongyang Castle though, the facilities related to King Dongmyeong of Goguryeo and the spaces of religion praying for blessings are spread in Bukseong and on the riverside of Daedonggang each. Second, as a Pyongando Province's economic center, Pyongyang's commercial landscape was represented by logistics and transportation facilities. The Daedonggang River, which was in charge of transportation functions, had many decks such as 'Yangmyeongpo', 'Cheongryongpo' and 'Waeseongjin' and bridges, such as 'Yeongjegyo' and 'Gangdonggyo', which connected major transportation routes. The road network was created in Oeseong area to facilitate logistics transportation and management, and many warehouses named after the jurisdiction of Pyongyangbu were distributed near the roads and Provincial Offices of the main gates. In addition, it was characterized by the urban area systematically divided with hierarchical roads, 'Bukjangnim' of willow trees planted on the main entrance roads of Pyongyang Castle, a linear landscape created by 'Simnijangnim' consisting of mixed forests with elm trees. Third, Pungnyu City is realized by the distribution of amusement facilities. The riverside of Daedonggang adjacent to Naeseong exhibits characteristics of artificial landscape such as a canal leading to the inside of the castle, a docking facility with embankments, and a port with cargo ships anchored. However, Bukseong of the natural surroundings had numerous pavilions and platforms such as 'Bubyeongnu', 'Eulmildae', 'Choeseungdae', 'Jebyeokjeong' and engraved letters such as 'Cheongnyubyeok', 'Jangbangho'. 'Osunjeong', 'Byeogwolji', 'Banwolji' near 'Sachang', and 'Aeryeondang', built on the island of a square pond, created waterscape in Naeseong invisible from the Daedonggang, and for practical purposes, ponds and repeated willow vegetation landscape related to Gija were placed in the western rampart of Jungseong. In addition, 'Seonyeondong', a cemetery of Gisaeng, located near by Chilseongmun, was used as poem titles and themes by literary people, contributing to the creation of the Pungnyu image of Pyongyang.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.101-111
• /
• 2022

As Asia's leading advanced country, Korea has an absolute advantage over foreign trade routes and maritime economies over inland countries. Following the change in social background, the original port area is for various reasons, and some ills are gradually revealing people's private interests. Due to this, it is the economic interest and future development space of the marine industry cluster in the port area that are directly affected and damaged. This study studied the relationship between marine industry clusters and port urban regeneration. It is intended to present the necessity and importance of activating the marine industry cluster through port urban regeneration while analyzing the regenerative design from the quantitative analysis angle. Therefore, first of all, the theoretical backgrounds were considered, and the cases of port cities that did well worldwide were analyzed according to the current status of the northern port of Busan, the research target site, through analysis. In addition, in order to increase the reliability of this study, the data of marine industry clusters and port city regeneration were reviewed using empirical analysis. Looking at the results of this study's case study and empirical analysis, it is a relationship that actually improved and interacted between the marine industry cluster and the port city regeneration. Through the study, it is expected that the Busan North Port Redevelopment Project will be promoted at the design, environmental, and economic level, and at the same time, it will be able to enhance its status as a marine city in Busan. The results show that, no matter which country or port city, the development of economy, society, culture and will inevitably promote the vigorous development of the marine industrial cluster, also, the port area development to a certain degree. will naturally the physical conditions of regional development obstacle through the port city of regeneration. This promotion will overcome.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.2
• /
• pp.97-106
• /
• 2015

Purpose : This study evaluate the thermal changes caused by use of the chemoport for drug administration and blood sampling during radiofrequency hyperthermia. Materials and Methods : 20cm size of the electrode radio frequency hyperthermia (EHY-2000, Oncotherm KFT, Hungary) was used. The materials of the chemoport in our hospital from currently being used therapy are plastics, metal-containing epoxy and titanium that were made of the diameter 20 cm, height 20 cm insertion of the self-made cylindrical Agar phantom to measure the temperature. Thermoscope(TM-100, Oncotherm Kft, Hungary) and Sim4Life (Ver2.0, Zurich, Switzerland) was compared to the actual measured temperature. Each of the electrode measurement position is the central axis and the central axis side 1.5 cm, 0 cm(surface), 0.5 cm, 1.8 cm, 2.8 cm in depth was respectively measured. The measured temperature is $24.5{\sim}25.5^{\circ}C$, humidity is 30% ~ 32%. In five-minute intervals to measure the output power of 100W, 60 min. Results : In the electrode central axis 2.8 cm depth, the maximum temperature of the case with the unused of the chemoport, plastic, epoxy and titanium were respectively $39.51^{\circ}C$, $39.11^{\circ}C$, $38.81^{\circ}C$, $40.64^{\circ}C$, simulated experimental data were $42.20^{\circ}C$, $41.50^{\circ}C$, $40.70^{\circ}C$, $42.50^{\circ}C$. And in the central axis electrode side 1.5 cm depth 2.8 cm, mesured data were $39.37^{\circ}C$, $39.32^{\circ}C$, $39.20^{\circ}C$, $39.46^{\circ}C$, the simulated experimental data were $42.00^{\circ}C$, $41.80^{\circ}C$, $41.20^{\circ}C$, $42.30^{\circ}C$. Conclusion : The thermal variations were caused by radiofrequency electromagnetic field surrounding the chemoport showed lower than in the case of unused in non-conductive plastic material and epoxy material, the titanum chemoport that made of conductor materials showed a slight differences. This is due to the metal contents in the chemoport and the geometry of the chemoport. And because it uses a low radio frequency bandwidth of the used equipment. That is, although use of the chemoport in this study do not significantly affect the surrounding tissue. That is, because the thermal change is insignificant, it is suggested that the hazard of the chemoport used in this study doesn't need to be considered.