• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.31-36
• /
• 1995

비유선형의 물체 주위의 유동은 정체유동, 경계층 박리 및 주기적 와열 생성 등의 복잡한 유동현상이 공존한다. 본 연구에서는 비교적 단순한 형상인 정사각주 주위의 비정상 난류 유동을 2-방정식 와점성 난류모델인 표준 $k-{\varepsilon}$ 모델과 RNG $k-{\varepsilon}$ 모델을 이용하여 예측할 수 있는지를 검증하였다. 정교하게 수행된 최근의 실험과 대와류모사(LES)의 결과를 검증을 위한 비교의 자료로 삼았다. 적절한 난류모델의 선정과 더불어 시간 정확도, 공간 정확도 및 대류항 처리법 등이 해석결과에 미치는 영향도 살펴보았다. 기존의 표준 $k-{\varepsilon}$모델은 정체점 부근에서 난류 운동에너지를 과도하게 생성하는 근본적인 문제점 때문에 실험 및 LES의 결과를 제대로 예측할 수 없었다. 난류운동에너지의 초과 예측에 따른 운동량의 과도한 혼합으로 인해, 항력계수 및 양력계수의 비정상성 뿐 아니라 평균 항력계수도 부정확하게 예측하였다. RNG $k-{\varepsilon}$ 모델을 사용한 경우에는 정체점 주위 유동현상의 예측이 상당히 향상되어 항력계수 및 양력계수의 평균치, 진폭 및 비정상성의 주기 등을 정확하게 예측하는 것이 가능하였다. 그러나 이 경우에도 예측의 정확도가 시간 증분과 격자의 크기 및 대류항 처리법등에 영향을 받으며, 특별히 대류항 처리법에 상당히 민감하게 변하는 것을 알 수 있었다. 향상된 유동예측은 RNG $k-{\varepsilon}$ 모델의 난류에너지 소산율 방정식의 개선된 항이 과도하게 생성된 난류에너지를 정체점 부근에서 제거하기 때문에 가능하다는 것을 알 수 있었다.의 20세 이하 골절 및 탈구가$30.3\%까지 감소하게되어 년도가 증가함에 따라 청장년 층에 비하여 소아골절 및 탈구가 전체적으로 감소하는 경향을 보였다. 스키골절의 부위별 발생빈도는 1990년 이전까지 하지골절 및 탈구가 많았으나 이후 점차 상지의 골절 탈구가 증가하였다 하지에서 가장 많은 골절은 경골 골절이었으며, 경골골절은 회전력에 의한 나선형골절이 $76.5\%로 가장 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을 증가시키지 않으면서 영구적인 신경학적 합병증을 일으키지 않았고 좋은 혈관 개존율을 보여주었다. 따라서 동맥 도관을 이용한 Off pump CABG는 관상동맥의 협착의 정도에 따라 효율적으로 시행

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.565-574
• /
• 2007

The flow control effect of blending Gurney flap with jet flap for flow around an NACA 0012 airfoil was numerically investigated through parameter variation of each flow control mechanism on unstructured meshes. The aerodynamic force and moment variations due to flow control were examined, and the results were compared between the blending control and each individual flow control. The results showed that the blending control required less energy input to achieve the same level of lift increment than that of the jet flap, and at the same time alleviated drag increment caused by introducing the Gurney flap.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.47-52
• /
• 1999

The influence of propeller revolution on measurement of fluctuating pressure is almost minimized in the KRISO cavitation tunnel and the measurement accuracy of fluctuating pressure acting on a flat plate due to a cavitating propeller is improved. The measurement data for Sydney Excess propeller is compared with the measurement results of other research institutes loading to the conclusion that KRISO data is so stable and reasonable. The fluctuating pressure data measured on a model ship and the prototype ship is compared with the data measured on the flat plate. The solid boundary factor, derived from a calculation based on a lifting surface theory, is applied to predict full scale pressure level from the experimental data on the flat plate, showing quite reasonable agreement with full scale data.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.197-206
• /
• 2009

To improve the aerodynamic efficiency of Smart Unmanned Aerial Vehicle (SUAV), vortex generators and flow fence are applied on the surface and the tip of wing. The initially applied vortex generator increased maximum lift coefficient and delayed the stall angle while it produced excessive increase in drag coefficient. It turns out reduction of the airplane's the lift/drag ratio. The new vortex generators with L-shape and two different height, 3mm and 5mm, were used to TR-S4 configuration to maintain the desired level of maximum lift coefficient and drag coefficient. Flow fence was also applied at the end of both wing tip to reduce the interaction between nacelle and wing when nacelle tilting angles are large enough and produce flow separation. To examine the effect of flow fence, flow visualization and force and moment measurements were done. The variation of the aerodynamic characteristics of SUAV after applying flow control devices are summarized.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.30-44
• /
• 1993

This paper deals with both experimental and theoretical methods for performance prediction of asymmetric stater propulsion systems which have been used for the purpose of recovery of a propeller slipstream rotational energy due to a stator located in front of the propeller. Using the developed computer code based on the lifting surface theory, theortical investigation on the interaction between the stator and the propeller is provided in order to obtain general insight on the performance characteristics of the propulsion systems in uniform and non-uniform flow. Such theoretical calculations have end agreements with model Inset results. The asymmetric stator would give an efficiency gain of about 6% to the compound propulsor system compared with the single propeller system.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.1-14
• /
• 2004

The observation of the various swing parameters and its effect on golfer swing are tatally analyzed. The golf ball impact and flies away, therefore it must be controlled bofore ball impact. The purpose of this paper is that the cause of hook and slice are found and the posture of swing is corrected. The trajectory after ball impact is on the $\Delta$-plane, which is consisted of the normal vector on club face and the swing velocity vector of club head including the initial celocity and the spin axis after ball imfact. In order to correct the miss shot in golf swing, this paper is is shown that the theoretical review and study is discussed to use the D-plane and $\Delta$-plane.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.281-286
• /
• 2006

본 연구의 목적은 차세대 대체에너지로 각광받는 풍력발전 중에서 육상발전보다 여러 가지 이점이 있는 한국형 해상풍력터빈 블레이드의 최적형상설계를 위한 알고리즘을 구현하는 것이다. 블레이드 단면 익형의 양력과 항력 분포는 XFOIL을 이용하여 예측하였다. 첫 번째 수준의 설계변수인 각각의 블레이드 지름과 축 회전수에서 익형의 공력변수들과 최소에너지손실 조건을 이용하여 두 번째 설계변수인 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 그리고 성능결과를 바탕으로 반응면을 구성하고, 확률적 방법을 이용하여 타당성 있는 설계공간까지 첫 번째 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 목적함수를 죄대로 하는 최적블레이드 형상을 구현하였다. 설계된 최적형상에 대해 탈설계점 해석을 수행하여 성능을 구하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2020

The wind turbine blades should be designed to possess a high stiffness and should be fabricated with a light and high strength material because they serve under extreme combination of lift and drag forces, converting kinetic energy of wind into shaft work. The goal of this study is to understand the basic knowledge required to curtail the process time consumed during the construction of small wind turbine blades using carbon fiber reinforced polymer (CFRP) prepeg composites. The configuration of turbine rotor was determined using the QBlade freeware program. The fluid dynamics module simulated the loads exerted by the wind of a specific speed, and the stress analysis module predicted the distributions of equivalent von Mises stress for representing the blade structures. It was suggested to modify the shape of test specimen from ASTM D638 to decrease the variance in measured tensile strengths. Then, a series of experiments were performed to confirm that the bladder compression molded CFRP prepreg can provide sufficient strength to small wind turbine blades and decrease the cure time simultaneously.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.40-51
• /
• 1991

A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.648-656
• /
• 2022

As environmental regulations such as the International Maritime Organization (IMO)'s strategy to reduce greenhouse gases(GHG) are strengthened, technology development such as eco-friendly ships and alternative fuels is expanding. As part of this, ship propulsion technology using energy reduction and wind propulsion technology is emerging, especially in shipping companies and shipbuilders. By securing wind propulsion technology and introducing empirical research into shipbuilding and shipping, a high value-added market using eco-friendly technology can be created. Moreover, by reducing the fuel consumption rate of operating ships, GHG can be reduced by 6-8%. Rotor Sail (RS) technology is to generate a hydrodynamic lift in the vertical direction of the cylinder when the circular cylinder rotates at a constant speed and passes through the fluid. This is called the Magnus effect, and this study attempted to propose a plan to increase propulsion efficiency through a numerical analysis study on turbulence flow characteristics around RS, a wind power assistance propulsion system installed on a ship. Therefore, C_L and C_D values according to SR and AR changes were derived as parameters that affect the aerodynamic force of the RS, and the flow characteristics around the rotor sail were compared according to EP application.