• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1378-1381
• /
• 2003

Recently, high-performance composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured fiber reinforced metal laminate materials are composed of two parts. One is hard-anodized A15083-O alloy as a face material and the other is high strength aramid fiber (Twaron CT709) and polyethylene fiber(Dyneema HB25) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit(V$\sub$50/, a static velocity with 50% probability for complete penetration) test method. V$\sub$50/ tests with 0$^{\circ}$ obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.113-117
• /
• 1994

In this paper, an experiment about humidity sensing properties of oxide aluminum films by Anodic oxidation method was made. The humidity sensing properties of films were investigated in the relative humidity range of 10∼85(%RH) , changing the frequency from 1[kHz] to 100[kHz]. The impedance of humidity sensing films were decreased in accordance with the increase of relative humidity. The decreasing rate of impedance were larger at low measuring frequency. The decreasing difference changes from 17.7M$\Omega$ to 3.68M$\Omega$ at low measuring frequency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.338-341
• /
• 1996

Anodic bonding is a key technology for micromechanical components. The main advantages of this method can be formed in a batch process, over large areas, and is permanent and irreversible. In this paper, the bonding was performed at temperatures ranging from 300 to 450 $^{\circ}C$, voltages 400 to 1000 V, and times 10 to 30 minutes. The sizes of the Si and the Pyrex #7740 glass were 6 mm $\times$6 mm, respectively. Bonding processes and voids were observed by the optical microscope, and the composition of the anodic bonding interface was analyzed by the SIMS. Optimum condition of the anodic bonding was at temperature above 40$0^{\circ}C$ without regard to voltage.

• Korean Journal of Materials Research
• /
• v.16 no.8
• /
• pp.503-510
• /
• 2006

The measurement of specific gases is based on the reversible conductivity change of sensing materials in semiconductor type gas sensors. For an application as gas sensors of high sensitivity, porous $SnO_2$ films have been fabricated by anodizing of pure Sn foil in oxalic acid and characteristics of anodic tin oxide films have been investigated. Pore diameter and distribution were dependent on process conditions such as electrolyte concentration, applied voltage, anodizing temperature, and time. Characteristics of anodic films were explained with current density-time curves.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.597-602
• /
• 1995

원자력 발전소 증기발생기 전열관 재료인 합금 600의 대체재료로써 설계된 합금 690의 내식성의 향상을 위해서 염소 이온이 다량 포함된 환경에서의 부식 저항성을 크게 향상시킨다고 보고된 Mo을 첨가하여 부식 및 기계적 특성에 미치는 영향을 알아보았다. 미세조직상 Mo를 첨가함에 따라 기지에 미세한 석출물이 석출되어 입자의 미세화를 얻을 수 있었으며 연신율의 감소없이 항복 강도, 인장 강도 및 경도의 향상을 얻을 수 있었다. 공식 저항성은 Mo의 첨가량이 증가함에 따라 부식 속도가 감소하였다. 양극 분극 시험에서도 5$0^{\circ}C$, 3.5wt% NaCl 용액과 0.5N HCl 용액 모두에서 Mo의 함량이 증가할수록 부동태화 전류 밀도 및 임계 부동태화 전류 밀도가 감소하여 전반적으로 현저한 내식성의 향상을 관찰할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.477-480
• /
• 1999

III-V족 화합물 반도체인 p-CaP의 자연산화막윽 30% $H_2O$$_2$용액 내에서 화학적인 이온반응을 통한 전기분해의 원리를 이용한 양극산화방법으로 형성하여 그 성장률과 광학적성질을 조사하였다. GaP자연산화막의 형성은 산소의 확산과정으로 이루어지며, 양측산화 막의 두께는 산화시간과 인가전압에 대하 여 선형적으로 비례하여 증가하였다. 자연산화막의 표면은 전자현미경으로 산화막의 두게는 파장이 6328$\AA$인 Ellipsometer를 사용하여 측정하였다. 광학적 성질은 적외선 영역에서의 광흡수 특성은 퓨리에 적외선 분광기로 측정하였으며 XRD 로 전압과 시간에 따른 산화막에 조성과 결정면을 알아보았다. 산화막의 형성방법과 형성조건에 따른 GaP 자연산화막의 절연막으로 이용하여 산화막에 조성에 따른 MOS 다이오드로서의 이용 가능성을 조사하였다.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.244-249
• /
• 2007

The properties of anodized films on aluminum 6061 alloy in single electrolyte of sulfuric acid and mixed electrolyte of sulfuric-boric acid and sulfuric-boric-nitric acid have been studied. Polarization tests in NaC solution were used to investigate the corrosion performance. Characteristics of film formation and surface morphology were examined by optical microscopy, FE-SEM and EDS. The results obtained have indicated that oxide films growth have been promoted by nitric acid and anodized films in mixed electrolyte have superior corrosion resistance. In case of anodic films formed in mixed electrolyte, some grooves and numerous crazings were also observed at the surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.106-107
• /
• 2007

We fabricated anodic aluminium oxides (AAO) on Si and sapphire substrates from the electrochemical reactions of thin AI films in an aqueous solution of oxalic acid. The thin AI films have deposited on Si and Sapphire substructure by using E-beam evaporation and thermal evaporation, respectively. The formation of AAO structures has investigated from FE-SEM measurement image and showed randomly distributed phase of nanoholes instead of the periodic lattice of photonic crystals. The AAO structure on sapphire shows the double layers of nanoholes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.50-55
• /
• 1999

We have investigated the $LiMn_2O_4$system as an cathode material for lithium rechargeable batteries. $LiMn_2O_4$spinel oxides have been synthesized by a solid state methode. We varied sintering time at a fixed sintering temperature of 75$0^{\circ}C$. In order to investigate the electrochemical properties of prepared $LiMn_2O_4$we assembled three-electrode cells using the working electrode as active material and Li metal as the counter and reference electrodes. The electrolyte was 1 M LiPE$_{6}$-EC:DEC(1:1 by volume). The particle size of sample synthesized at 75$0^{\circ}C$ ranged about 60$\mu m$. The discharge capacity of a cell involving spinel $LiMn_2O_4$ increased with increasing sintering time.e.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.152-153
• /
• 2006

본 연구에서는 태양전지 표면에 입사된 광자의 반사손실을 최소화하기 위한 방법으로써 기판 표면에 다공성 실리콘층을 이용한 반사방지막 (Anti-Reflection Coating, ARC)을 형성하는 실험을 하였다. 다공성 실리콘(Porous silicon, PSi)은 실온에서 일정 비율로 만든 전해질 용액($HF-C_2H_5OH-H_2O$)을 사용하여 실리콘 표면을 양극산화처리 함으로써 단순 공정만으로 실리콘 기판의 반사율을 높일 수 있다. 또한 새로운 레이어(layer)없이 기존 기판을 식각시켜 만들기 때문에 박막형 태양전지를 제작시 적용이 용이하다. 저비용, 단순공정의 이점을 살려 전류밀도에 따른 PSi의 반사방지막으로써의 특성을 비교 분석하였다.