• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.151-151
• /
• 2003

최근 휴대폰용 LCD, 컴퓨터용 TFT LCD, 가정용 PDP 등 평판 디스플레이 산업의 발달에 힘입어 평판 디스플레이 장치의 구동 칩 실장 부품인 TCP(tape carrier package), COF(chip on film) 제조 산업 또한 발전하고 있다. 이들 TCP, COF는 디스플레이 장치의 경박화에 따라 보다 가는 선폭의 회로가 요구되어지는데 이를 위해 회로를 구성하는 기본소재로 얇은 두께의 동박이 사용된다. 회로기판용 동박으로는 압연동박과 전해동박이 함께 사용되어 왔으나 박막의 제조가 어려운 압연동박의 단점과 면에 수직한 주상정 조직이 발달해 있어 일반 압연 동박에 비해 접착력이 뛰어나며 전류밀도 또는 티타늄 음극 드럼 회전 속도를 조절하여 두게 조절이 용이한 전해동박의 장점으로 인해 현재 압연동박의 전해동박으로의 대체가 증가하고 있다. 전해동박의 제조공정은 크게 제박 공정과 후처리 공정으로 나눌 수 있다. 전해동박은 먼저 드럼형태의 티타늄 음극과 불용성 납 양극으로 이루어진 제박기에 고 전류를 가하여 황산구리 용액 중 구리를 티타늄 음극에 석출시킴으로서 구리 원박을 제조한 후 접착력 향상을 위한 노듈 형성, 방식, 방청, 내열성 향상 등을 위한 여러 개의 단위 셀 조합으로 이루어진 후처리 공정을 거쳐 제조된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.124-124
• /
• 2003

To improve the electrochemical properties of thin-film LiCoO$_2$ cathodes, metal oxides were coated on the LiCoO$_2$ thin films using f sputtering. Galvanostatic charge-discharge experiments showed the enhanced cycling behaviors in the metal-oxide coated LiCoO$_2$ thin films than the uncoated ones. These results are because the metal-oxide coating layer suppresses the degradation of Li-diffusion kinetics during cycling, which is related to the protection of cathode surface from the electrolytes [l-3]. The variation in the metal-oxide coating thickness ranging from 10 to 300 nm did not affect the electrochemical properties. Changes of lattice constants in the coated and bare LiCoO$_2$ thin films at different charged states will also be discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.399-406
• /
• 2014

Thermal batteries are used for military power sources that require robustness and long storage life such as missiles and torpedoes. $FeS_2$ powder is currently used for cathode materials because of its high specific energy density, environmental non-toxicity and low cost. However, large particle size of conventional $FeS_2$ has been deterred its possible application for higher power thermal batteries. In order to improve the power density, high energy ball milling of $FeS_2$ has been introduced to crush the micron-sized $FeS_2$. Discharge characteristics of the single cells fabricated with nano-materials and conventional $FeS_2$ powder were evaluated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.180-184
• /
• 2017

In this study, we examine the electrical properties of diketopyrrolopyrrole (DPP) containing polymer semiconductors that have been reported to show high performance with ambipolar characteristics. We prepared three different DPP based polymer semiconductors (PDPPTPT, PDPP3T, and PDPP2T-TT) and fabricated organic thin film transistors (OTFTs) with ambipolar polymer semiconductors as an active layer. All three DPP polymers showed only p-type properties at initial measurements. However, after annealing in vacuum oven for 24 hours, it was found that the DPP based polymers have both p-type and n-type properties. It is speculated that the residual impurities supposedly regarded as a strong electron trap source were eliminated during the vacuum process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.10
• /
• pp.741-744
• /
• 2013

In this study, we fabricated anodic aluminum oxide (AAO) membrane by two step anodizing process for pH detection. The structural properties were observed by X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM). Electrochemical measurements of the pH sensor have been performed in capacitance-voltage (C-V) and drift rates. The characterization of AAO membrane exhibited high sensitivity (99.1 mV/pH) at second anodizing time of 4 min.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.25.3-25.3
• /
• 2011

반도체형 가스센서의 가스 감응은 산화물 표면과 주변 가스와의 화학적 반응에 기인한 것이므로 나노 크기의 감응물질 입자를 합성하여 비표면적을 넓히려는 연구가 많이 진행되어 왔다. 일반적으로 감응 물질의 크기가 나노 스케일로 감소하면 가스 감응 특성이 증가하지만, 심한 응집으로 가스 확산이 어려워 가스 감응 특성이 저하되게 된다. 따라서 비표면적이 크면서도 응집이 덜한 나노 구조체가 산화물 가스 센서에 이용되어 왔다. 특히 중공구조는 응집이 적고 가스확산이 용이하며 큰 비표면적을 가지기 때문에 널리 연구되어진 나노구조체이다. 한편 산화철은 친환경적인 n-type 반도체로써 에너지 저장소, 촉매, 리튬-이온 배터리의 양극물질, 가스센서 등의 응용분야에 널리 이용되고 있다. 본 연구에서는 Solvothermal에 의한 자기조립 방법으로 산화철 중공구조를 합성하고 기능화를 위해 귀금속 촉매인 Pt를 첨가하였다. $400^{\circ}C$에서 에탄올 가스에 대한 가스 감응 측정을 통해 대조군인 산화철 응집체와 나노 스케일의 구에 비해 중공구조가 가스 감응에 유리함을 보고한다.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.10-12
• /
• 1998

Si FEA 로부터 tip의 표면을 Ti금속으로 silicidation한 새로운 2극형 Ti-실리사이드 FEA를 제작하고 이의 전계방출 특성을 Si FEA의 경우와 비교하였다. 양극과 음극간의 거리를 10$\mu\textrm{m}$로 유지하고 $10^{-8}$Torr의 고진공 상태에서 측정한 실리사이드 FEA의 turn-on전압은 약 40V로, 전계방출전류와 정상상태 전류 변동율은 150V의 바이어스 아래에서 약 3x$10^{-2}$ $\mu$A/tip와 0.1%min로 나타났다. Ti-실리사이드 FEA는 Si FEA에 비해 낮은 turn-on 전압, 높은 전계방출전류 및 고내구특성을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.268-268
• /
• 2010

AC anodizing on aluminum foil was investigated by the variation of AC voltage and frequency. The voltage and frequency were applied in the range of approximately 40~200V, 0~400Hz. The porous alumina film was formed and the growth rate of oxide film is increased with frequency. The structural property was analyzed by SEM and XRD. SEM results show the approximate relation between frequency, voltage and growth rate. The AC voltage effect on the structural modulation of porous alumina indicates that AC anodizing is useful for the application to nanocapacitor material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.62-63
• /
• 2008

Photonic crystas were fabricated using an anodic aluminum oxide(AAO) mask on GaN diode. The Photonic crystal structure has been investigated from Atomic Force Microscope(AFM). The hole diameter and lattice constant of photonic crystal are 60nm and 105nm, respectively. Photoluminescence of photonic crystal was enhanced and optical interference was increased by photonic crystal effect.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.273-278
• /
• 2003

Recently, high-performance hybrid composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured hybrid composite materials are composed of two parts. One is hard-anodized Al5083-O alloy as a face material and the other is high strength aramid fiber ($Twaron^{(R)}$ CT709) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit($V_{50}$, a static velocity with 50% probability for complete penetration) test method. $V_{50}$ tests with $0^{\circ}$obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.