• Title/Summary/Keyword: 양극부

Search Result 86, Processing Time 0.046 seconds

Removal of Lead from Lead-loaded Activated Carbon Using Water Electrolysis (물의 전기분해를 이용한 납-흡착 활성탄으로부터 납의 제거)

  • Kim, Bu Ung;Sung, Kyoung Sik;Choi, Yeon Seok
    • Applied Chemistry for Engineering
    • /
    • v.10 no.6
    • /
    • pp.929-933
    • /
    • 1999
  • Under the condition of water electrolysis in aqueous hydrochloric acid as the electrolyte, the lead removal from the lead-loaded activated carbon packed on the anode was investigated. The adequate flow condition is a total flow rate of 10 mL/min in the same flow rate ratio to both electrodes. The increase of current decreases pH values at the anode and the decrease of pH leads to the lead removal. This work shows that the water electrolysis is an efficient method for the lead removal from the lead-loaded activated carbon with a reduction in quantity of the chemical used in comparison with the acid rinse.

  • PDF

Design and testing of bipolar pulsed power supply with high efficiency for mineral exploration (광물 탐사를 위한 고효율 양극성 펄스전원장치 설계 및 실험)

  • Bae, Jung-Soo;Kim, Shin;Yu, Chan-Hun;Kim, Hyoung-Suk;Kim, Jong-Soo;Jang, Sung-Roc
    • Proceedings of the KIPE Conference
    • /
    • 2018.07a
    • /
    • pp.48-50
    • /
    • 2018
  • 본 논문은 광물 탐사용 25kW 양극성 펄스전원장치에 대해 기술한다. 고효율 LCC 공진형 컨버터와 풀 브리지 기반 바이폴라 펄스 스위칭부로 구성된 500V, 12.5A 단위 모듈을 설계한다. LCC 공진형 컨버터는 도전 손실을 줄이기 위해 사다리꼴 모양의 공진 전류를 갖도록 하고, 높은 전력 밀도를 달성하기 위해 변압기의 누설 인덕턴스를 공진 인덕턴스로 활용한다. 또한, 반복적인 짧은 펄스 기반으로 설계된 게이트 구동 회로는 DC에서 8kHz의 주파수 범위를 동작시키고 게이트 변압기의 사이즈를 줄이기 위해 제안된다. 개발된 양극성 펄스전원장치는 4개의 모듈이 직병렬로 결선되어 부하 조건에 따라 Grounded dipole mode (2kV, 12.5A) 또는 Loop mode (500V, 50A)로 동작한다. 네 모듈의 출력 전압 밸런싱을 충족시키기 위해 LCC 공진형 컨버터의 변압기에 보상권선이 감긴다. 본 논문에서는 양극성 펄스전원 장치의 상세설계에 대해 기술하고, 시뮬레이션 및 실험 결과를 통해 이를 검증한다.

  • PDF

A Study on Monitoring of Mitigation of Rail Corrosion using Sacrificial Anode Cathodic Protection Method (희생양극법을 적용한 철도 레일의 방식효과 모니터링 연구)

  • Choi, Jung-Youl;Park, Jong-Yoon;Lee, Kyu-Yong;Chung, Jee-Seung
    • The Journal of the Convergence on Culture Technology
    • /
    • v.5 no.4
    • /
    • pp.367-371
    • /
    • 2019
  • In this study, we proposed the sacrificial anode cathodic protection method as a countermeasure to reduce the corrosion of railway rails under oceanic climatic conditions and proved the anticorrosive effect experimentally. In addition, the proposed sacrificial anode cathodic protection method were tested on site to examine long-term rail corrosion monitoring and field applicability for more than 26 months and to prove the effectiveness of rail corrosion. As a result of monitoring the corrosion state using the cellophane tape method, the appearance of the applied sections with sacrificial anode cathodic protection method was good at the present time about 26 months after the field test laying, and no abnormalities and other abnormalities of the rail welded section and the rail web were found. Hence, in places where no sacrificial anodes were installed, rust progressed rapidly. In addition, the proper spacing of sacrificial anodes was found to form the most stable corrosion coating at 1.0 ~ 1.5m. After about 26 months of monitoring, the installation of sacrificial anodes could help stabilize the overall rail corrosion level, even if the spacing was somewhat wider.

Electricity Production Performance of Single- and Dual-cathode Microbial Fuel Cells Coupled to Carbon Source and Nitrate (Single-cathode와 Dual-cathode 미생물연료전지의 탄소원과 질산성질소의 전류발생 특성)

  • Jang, Jae-Kyung;Lee, Eun-Young;Ryou, Young-Sun;Lee, Sung-Hyoun;Hwang, Ji-Hwan;Lee, Hyung-Mo;Kim, Jong-Goo;Kang, Youn-Koo;Kim, Young-Hwa
    • Microbiology and Biotechnology Letters
    • /
    • v.39 no.4
    • /
    • pp.382-386
    • /
    • 2011
  • Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

Three-Dimensional Numerical Analysis of Arc Plasmas with an Axial Magnetic Field Vacuum Interrupter (축자계 진공차단부에서 발생하는 아크 플라즈마 3차원 수치해석)

  • Seo, Hyeon-Seok;Kim, Yun-Je;Lee, Jong-Cheol
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.249-249
    • /
    • 2011
  • 전력용 개폐장치인 진공차단기의 차단부가 송배전 시스템에 30 [kA] 정도의 커다란 사고전류가 흐르는 것을 방지하기 위하여 동작될 때 차단부 내부 전극 사이에 25,000 [K] 이상의 아크 플라즈마가 발생하게 된다. 두 전극 사이에 발생된 아크 플라즈마는 약 10 ms~20 ms 동안 지속되다가 교류전원의 전류영점 부근에서 회복된 절연성능으로 인하여 자연스럽게 소멸되지만, 대전류 구간동안 아크 플라즈마의 집중 현상 등에 의하여 전극의 심각한 손상 등이 발생되면 절연성능이 요구된 만큼 회복되지 못하여 사고전류를 차단하지 못하며 시스템에 연결된 기기들에게 심각한 손상을 입히고 정전사고를 일으킨다. 본 연구에서는 전자계-열유동 연성해석기법을 이용한 축자계 진공차단부에서 발생하는 아크 플라즈마의 3차원 수치해석을 통하여 전극의 심각한 손상을 입히는 아크플라즈마의 집중 현상에 관한 축자계의 영향을 고찰하고자 한다. 수치해석을 위한 아크 영역은 양극과 음극의 직경과 같은 직경의 원기둥으로 가정하였고, 전자계 해석으로부터 얻어진 로렌츠 힘과 줄열을 열유동 해석을 위한 Navier-Stokes 방정식의 파라미터로 입력하여 해석을 수행함으로써 전자계와 유체역학적인 영역을 동시에 연계한 순차적 일방향 연성해석 기법을 적용하였다. 컵형 축자계 진공차단부 내 아크영역에서의 로렌츠 힘의 특성과 온도분포에 대하여 수치해석을 수행하였고, 크기가 다른 두 로렌츠 힘에 의하여 양극표면으로 집중되는 온도분포의 크기를 비교함으로써 진공아크 플라즈마의 집중현상에 영향을 미치는 주요 요소를 규명할 수 있었다.

  • PDF

Evaluation of corrosion resistance by electrochemical methode of welded Al 5083-H321 alloy (Al 5083-H321 합금 용접부의 내식성 평가를 위한 전기화학적 특성 분석)

  • Yang, Ye-Jin;Kim, Seong-Jong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.137-137
    • /
    • 2017
  • Al-Mg 합금은 비중이 적고 강도가 우수하기 때문에 해양 환경에서 구조용 재료로 많이 사용되고 있으며, 특히 선박용 재료로 사용될 경우 선체의 중량을 줄일 수 있어 연료비가 절감되며 선속의 고속화가 가능하다. 그러나 해양환경에서의 재료 특성에 관한 지식 및 관련 기술 부족으로 알루미늄 선박 건조는 활성화 되지 못하고 있는 실정이다. 알루미늄 합금은 공기 중에서는 우수한 내식성을 지니는 것으로 알려져 있으나 해수환경에서는 염소이온에 의한 부동태 피막 파괴로 인해 내식성이 저하되며 공식 및 응력부식균열 등에 의한 손상이 발생할 수 있다. 특히 용접부의 경우, 모재에 비해 부식손상에 취약하며 기공과 같은 용접 결함을 포함하고 있어 구조물 파괴의 시발점이 될 수 있으므로 선박 및 구조물 건조시 대비가 필요하다. 그러나 이에 관한 충분한 연구가 이루어지지 않아 국내 중소형 조선소의 경우 알루미늄 선박 건조에 어려움을 겪는 경우가 많다. 따라서 본 연구에서는 선박 건조 및 해양 구조물에 널리 사용되는 Al 5083-H321 합금 용접부에 대하여 해수 내 부식 특성을 연구하고자 한다. 부식특성 파악을 위한 전기화학적 실험에 앞서 화학적 에칭을 통해 미세부위별 실험을 수행하였다. 기준전극은 은/염화은 전극을 대극은 백금전극을 사용하였으며, 타펠 분석을 위한 분극실험은 OCP를 기준으로 -0.25 ~ +0.25 V까지 실시하였고 양극분극실험은 OCP ~ +3.0 V까지 실시하였다. 양극분극 실험 후 부식된 표면은 주사전자현미경과 3D 분석을 통해 용접부 조직에 따른 전기화학적 특성을 관찰하였다.

  • PDF

A Study on Functionally Graded Material Spacer and Electrodes Shape in Gas Insulated Switchgear for the Improvement of Insulation Performance (절연성능 향상을 위한 가스절연 개폐장치에서의 경사 기능성 재료 스페이서 및 전극 형상 연구)

  • Ju, Heung-Jin;Kim, Bong-Seok;Ko, Kwang-Cheol
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1358_1359
    • /
    • 2009
  • 가스 절연 개폐장치(Gas Insulated Switchgear : GIS)의 고체 스페이서에 경사기능성 재료(Functionally Graded Material : FGM)를 적용할 때, 전계의 완화를 예상할 수 있다. 특히, 균일 유전율 분포를 가지는 스페이서에서 양극 근처에 집중된 높은 전계가 FGM 스페이서를 사용할 때, 스페이서와 $SF_6$ 가스의 접촉부로 옮겨지며, 그 크기가 완화됨을 확인할 수 있었다[1]. 본 연구에서는 상용 고체 스페이서의 양극 부근에서의 전계 집중을 감소시키기 위해 전극 형상의 최적화를 수행하였다. 최적화 기법으로는 완전계승계획법(Full Factorial Design : FFD)과 결합된 반응표면법(Response Surface Method : RSM)을 이용하였으며, 균일 유전율 스페이서에서 양극 형상을 최적화하였다. 또한 타원형 유전율 분포를 가지는 FGM 스페이서를 이용함으로써, 상용 GIS 모델에 비해 최대 전계가 크게 완화될 수 있음을 확인하였으며, 상용 GIS의 외함부의 크기를 줄여 실제 소형화 가능 여부를 확인하였다.

  • PDF

Design of Bipolar Pulse Power Supply for Strategic Mineral Exploration (전략광물 탐사를 위한 양극성 펄스전원장치 설계)

  • Bae, Jung-Soo;Jang, Sung-Roc;Yu, Chan-Hun;Kim, Hyoung-Suk;Kim, Jong-Soo
    • Proceedings of the KIPE Conference
    • /
    • 2017.07a
    • /
    • pp.90-91
    • /
    • 2017
  • 본 논문은 전략광물 탐사를 위한 25kW급 양극성 펄스전원장치에 대하여 기술한다. 고효율 LCC 공진형 컨버터를 적용한 DC/DC 전력변환 회로부와 펄스를 발생시키기 위한 풀 브릿지 기반의 양방향 펄스 스위칭부로 구성된 500V, 12.5A 단위모듈을 설계하고, 4개의 모듈을 직병렬 구성하여 탐사 방식에 따라 요구되는 고전압 저전류(2kV, 12.5A) 혹은 저전압 대전류(500V, 50A) 동작이 가능한 전략광물 탐사용 펄스전원장치를 개발한다. 본 논문에서는 공진회로, 변압기 등 단위모듈의 상세설계에 대하여 기술하고, 시뮬레이션 및 실험 결과를 통해 이를 검증한다.

  • PDF

The Study on the Corrosion Characteristics of STS 304 Pipeline Steel Weldment for Gas Cooling & Heating System (가스 냉온수기용 STS 304 배관 용접부의 부식특성에 관한 연구)

  • Kim, Hwan-Sik;Lim, Uh-Joh
    • Journal of the Korean Institute of Gas
    • /
    • v.11 no.2 s.35
    • /
    • pp.31-36
    • /
    • 2007
  • In order to study on the corrosion characteristics of STS 304 pipeline steel weldment for gas cooling & heating system. the electrochemical polarization test and corrosion test by impressed potential in 0.5M $H_2SO_4+0.01M$ KSCN solution was carried out. Also, SEM and hardness of welding zone was measured. And then passive behavior, corrosion behavior by the impressed potential and SEM aspect and hardness behavior of base metal(BM) and heat affected zone(HAZ) for STS 304 pipe were investigated. The main results are as follows: 1) The critical anodic current density of heat affected zone(HAZ) is drained more highly than that of base metal(BM), and primary passive potential of HAZ become higher than that of BM. 2) The passive current density of TUE is drained more highly than that of BM, and passive region of BM become bigger than that of HAZ. 3) By the impressed potential, the current density of HAZ is drained more than that of BM.

  • PDF

Design and testing of 25kW bipolar pulse power supply for mineral exploration of Mt.Taebaek (광물 탐사용 25kW급 양극성 펄스전원장치 설계 및 태백산 탐사시험)

  • Bae, Jung-Soo;Kim, Shin;Kim, Tae-Hyun;Yu, Chan-Hun;Kim, Hyoung-Suk;Kim, Jong-Soo;Jang, Sung-Roc
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.257-259
    • /
    • 2019
  • 본 논문은 광물 탐사를 위한 25kW급 양극성 펄스전원장치에 대해 기술한다. 소프트스위칭 기반의 고효율 LCC 공진형 컨버터와 풀 브리지 기반 양극성 펄스 스위칭부로 구성된 단위 모듈(500V, 12.5A)을 기반으로 설계한다. LCC 공진형 컨버터는 전류의 rms값을 줄이기 위해 공진 전류모양을 사다리꼴 형태로 설계하여 도전 손실측면에서 크게 개선되었고, 높은 전력밀도를 달성하기 위해 변압기의 누설 인덕턴스를 공진 파라메터로 활용한다. 추가적으로, 짧은 펄스폭을 가지도록 설계된 게이트 구동 회로는 출력을 DC에서 8kHz의 넓은 주파수 범위에서 동작시킬 뿐만 아니라 게이트 신호를 전달하기 위한 변압기의 사이즈를 줄이기 위해 제안된다. 단위모듈 형태로 개발된 양극성 펄스전원장치는 4개의 모듈이 직병렬로 결선되어 부하조건에 따라 Grounded dipole mode (2kV, 12.5A) 또는 Loop mode (500V, 50A)로 동작한다. 4모듈 직병렬 운전 시 발생하는 모듈 간 전압 불균형 문제를 해결하기 위해 메인 변압기에 보상권선이 감긴다. 본 논문에서는 개발된 양극성 펄스전원 장치의 설계를 저항부하 실험 및 태백산 탐사시험 결과를 바탕으로 검증한다.

  • PDF