• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.44-51
• /
• 2007

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.51-58
• /
• 1993

일반적으로 EMI 측정시험장으로 활용되고 있는 시설로서는 야외 시험장(open site)과 전자파 무반사실 (anechoic chamber)이 있다. 전자의 경우는 전자파 간섭 영향이 없어야 하고 반사 또는 커플링의 영향을 줄 수 있 는 장애물이 없어야 하는 시험환경 조건이 요구되지만, 근래의 전자기기 사용증가, 방송, 무선 통신시스템의 다양화 및 산업의 복잡화에 따른 인공잡음의 증대로 그 선정이 극히 어려워 도시에서 멀리 떨어진 곳, 즉 연구 개발 및 제품 생산 소재지로 부터 멀리 떨어진 곳에서나 가능하게 되었으며, 그외에도 기상조건에 의한 영향 및 주변 개발에 의한 잡음 환경의 변화로 성능 보존이 어렵다. 후자의 경우는 야외 시험장의 전자파 환경 문제점을 피할 수 있어, 도시나 혹은 제품 생산지 가까이에 설치 운용이 가능하나 이들 모두 수억에서 십수억원에 이르는 설치 비용이 들어 중소 업체에서 보유하기가 어렵다. 또한 안테나 를 송수신원으로 사용하므로서 저주파수대 측정이 어려울 뿐만 아니라 피시험체주변 공간(반경 3, 10M)에서의 1점 측정 방식으로 인해 측정시간이 많이 소요되는 기술적인 문제점을 지니고 있다.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.218-222
• /
• 2003

Even if using the standard field test which radiation of electric wave and measurement test equipment there are difficult thing that building test equipment. so, we can use the substitution test field. In this paper, for optimization analysis for homogeneous field structure of GTEM-CELL (Giga hertz Transverse Electro Magnetic Cell) that calculate electromagnetic field characteristic for variable of each structure and characteristic impedance inner conductor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1456-1463
• /
• 1999

This paper describes the measurement system of antenna factor using standard antenna method in OATS(Open Area Test Site) of KRISS(Korea Research Institute of Standards and Science) and methods for reducing an environmental noise affecting antenna factor. The range of measurement frequency is 30 - 1000 MHz, all control and data acquisition were done by computer automatically. Measurement results of antenna factors are presented, total uncertainty of antenna factor is $\pm$1 dB.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.439-446
• /
• 1999

In situ experimental studies were Performed at Yongjong Island Geotechnical Experimental Site to evaluate the ground densification on sand deposited. Standard penetration test, cone penetration test, and SASW test were performed and soil profiles and quality of ground improvements were evaluated. The feasibility of applying SASW method were verified by comparing test results. The evaluation technique of in-situ density using SASW and resonant column tests was proposed, and the reliability of proposed method was verified by performing case studies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.571-579
• /
• 2005

This paper presents the classical site attenuation characteristics of a forced resonant electromagnetic interference (EMI) dipole antenna for frequencies below 80 MHz. The coupled integral equations for unknown current distribution are solved by the Galerkin's method of moments with piecewise sinusoidal functions. The results show that the forced resonant type EMI dipole antenna for frequencies below 80 MHz can be used effectively for measuring the classical site attenuation of horizontal polarization. The theoretical site attenuation curves presented can be used as reference curves for evaluating the performance of an open area test site.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.467-472
• /
• 2004

This paper presents the normalized site attenuation characteristics for frequencies below 80 ㎒ using forced resonant type EMI dipole antennas. The coupled integral equations for unknown current distribution are solved by the Galerkin's method of moments with piecewise sinusoidal functions. The results show that the forced resonant type EMI dipole antenna for frequencies below 80 ㎒ can be used effectively for the measuring normalized site attenuation. The calculated normalized site attenuation curves for the forced resonant type EMI dipole antenna are useful in determining the suitability of open area test sites.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2019

Since the AESA radar scans and tracks a distant targets or ground, it requires a test field which meets far-field condition before flight test. In order to test beam foaming, targeting, and availability from cluttering and jamming, it is general to build a outdoor roof-lab test site at tens of meters high. However, the site is affected by surrounding terrain, weather, and noise wave and is also requires time, space, and a lot of costs. In order to solve this problem, theoretical near-field beam foaming method has proposed. However, it requires modification of associated hardware in order to construct near-field test configuration. In this paper, we propose near-field beam foaming method which use single LUT in order to calibrate the variation of TRM(transmit-receive module) which consists AESA radar without modification of associated hardware and software. It requires less costs than far-field test and multiple LUT based near-field test, nevertheless it can derives similar experimental results.

• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.122-129
• /
• 2016

In this study, a dual structured pipe for a preventive monitoring on a accident damage, a smartphone app program for a survey and a construction data collection and a server program for a real-time monitoring were developed. A pilot system was installed in the test field to analyze effects of a system developed in this study. The data for a damage prevention was detected by the attached sensors on the pipe. Exclusion was tested by the pressure sensors to be installed at regular intervals. The app and server programs was enabled to the real-time data collection and real-time monitoring linked by VRS survey equipments and a smartphone.