• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.419-432
• /
• 2010

Various torque generating devices have been developed and employed to apply a proper torque. These devices are usually calibrated by the manufacturer to apply appropriate torque levels for their specific implants and attachments. The purpose of this investigation was to determine and compare the accuracy of the torque controllers. In this study, 4 types of torque controllers were used; torque limiting device(TLD), torque indicating device(TID) and contra angle torque driver(CA), electronic torque controller(ETC). Digital torque gauge was employed to measure the de-torque value. Thirty cycles of tightening and loosening were repeated with each torque controller. All implant torque controllers have shown slight errors and deviations. The contra angle torque driver exhibited the most accurate data. In the limitation of this study, it would be recommended that the implant torque controllers should be checked whether uniformed and precise torque can be generated and a measuring error should be corrected.

• Electric Engineers Magazine
• /
• v.231 no.11
• /
• pp.18-24
• /
• 2001

맨홀, 전력구내에 케이블 및 접속함을 설치하기 위해서는 먼저 앵글형 지지대 또는 강관형 지지대를 설치하여야 한다. 케이블 지지대는 맨홀 및 전력구내에 설치되는 케이블 및 접속함 자중에 의한 수직하중과 케이블 포설시가해지는 수평하중에 견디어야 하므로 시공에 철저를 기하여야 한다. 특히 맨홀 및 전력구내부에는 습기가 많아 방식용 도금이 벗겨지지 않도록 운반 및 시공시 주의가 요구된다.

• 주택과사람들
• /
• s.219
• /
• pp.24-24
• /
• 2008

신화를 창조하는 세계 최고 사진 에이전시 매그넘 포토스(Magnum Photos)소속 사진작가들이 2006년 10월부터 1년여 동안 대한민국을 촬영했다. 매그넘 작가 20명이 건국 60돌을 맞은 한국의 현재 모습을 저마다의 시각으로 담아낸 2400여 장의 사진 중에서 엄선한 작품만을 선보이는 이번 사진전은 예술의전당 한가람미술관에서 8월 24일까지 계속된다.

• Korean Institute of Interior Design Journal
• /
• no.21
• /
• pp.154-165
• /
• 1999

It is characteristic that houses designed by Adolf Loos show commonly a contradictory aspect between the exterior and interior. The exteriors of the houses are simple and on the other hand the interiors are affluent to the greatest degree. At that time, a stylized gorgeous decoration of the inner space had been prevailed in general among the historicism and Vienna Secession people, and such an inner spatial conception as by Loos must have brought a turning point for the development of a new inner spatial conception which can by itself be called revolutionary. This study is gong to clarify the fact that Loos has been in full consideration of the emotional side basically for the human being in the conception of inner space, by complementing the respect that his conception of the inner spatial composition, concentrating purity, comfort and classicalism on the furniture. Despite the independency of the Loos furniture is near copying, different from existing creative conception, it can be meaningful in respect that it creates out a rather accustomed and still a new space thought adding a little transformation to the existing classical furniture. So this study is going to re-establish the characteristics of the Loos furniture which work as the greatest impact in the composition of affluent inner space, the prototypical characteristics of that furniture, and the basical thinking system of Loos which can be found out in a little transformatiov.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1368-1375
• /
• 2012

In this paper, a method for prediction of spread is proposed to design proper roll profile taking into account spread in shape rolling of angle bar. The effect of the process variables on spread, such as draught ratio, bending angle and aspect ratio, is analyzed by FE-analysis and response surface method (RSM). Roll profiles for equal angle bar are designed with the spread predicted by the regression equation. Effectiveness of the designed roll profiles are verified by FE-analysis in which the flange length, strain distribution, mean strain and roll torque are compared with those by Geuze. Finally, the proposed method is applied to the design of roll profile for unequal angle bar. As a result, the final product can be obtained within the allowable tolerance of ${\pm}0.5mm$ in length. Therefore, it is found that the prediction of spread can improve the efficiency of design roll profile in shape rolling of angle bar.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.123-129
• /
• 2015

In general, recent critical studies of five-axis machine have tended to center on the question of effective machining to realize complex shape parts. However, the hydrostatic bearing and journal bearing, both of which are involved in the complex process of dividing the processing of internal precision-shape machining, must be optimized. Although the angle head is designed to machine the internal shape as it approaches the inner diameter of the work piece, research on the angle head in five-axis machining has received only minimal attention in domestic industries. In this study, an angle head which is optimized for effective internal shape machining is developed. In pursuit of this purpose, 3D and 2D designs of the angle head for five-axis machining are devised. Reliability is secured through static performance tests and machining accuracy evaluations of the angle head in keeping with the machining accuracy standard of 0.2mm for hydrostatic bearings.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1037-1045
• /
• 1996

In this paper, the parallel model for stereo camera is employed to find the heralding angle and the distance between a leading vehicle and the following vehicle, BART(Binocular Autonomous Research Team vehicle). Two TDNNs (Time Delay Neural Network) such as S-TDNN and A-TDNN are introduced to control BART. S-TDNN controls the speed of the following vehicle while A-TDNN controls the steering angle of BATR. A human drives BART to collect data which are used for training the said neural networks. The trained networks performed the vehicle tracking function satisfactorily under the same driving conditions performed by the human driver. The neural network approach has good portability which decreases costs and saves development time for the different types of vehicles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2016

The cutting performance of a developed small-angle spindle tool was investigated with Al6061 using a TiAlN coated high-speed steel end mill. Up-cut and down-cut processes in a milling machine were carried out at the range of 1000-4000 rpm for spindle speed and 50-300 mm/min for feed rate. As a result, the highest cutting force in the Fx direction was obtained from the up-cut process when the spindle speed was 1000 rpm and the feed rate was 100 mm/min. In the Fy direction, the highest cutting force appeared in the up-cut process at a feed rate of 250 mm/min at the same spindle speed. Conversely, the lowest cutting force came out in the up-cut process at a spindle speed of 4000 rpm and a feed rate of 50 mm/min. As for surface finish, the finest surface roughness was obtained as Ra 0.7642 um at a spindle speed of 4000 rpm and a feed rate of 50 mm/min. Consequently, given the cutting performance of the developed small-angle spindle tool, we conclude that its use in industrial practice is feasible.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.47-54
• /
• 2017

This study examines the implementation of a kinematic machining tool to evaluate the interference and collision phenomenon of 5-axis machining of wing ribs from airplanes, particularly for a large-size model airplane. We develop a machine simulation model of a parallel kinematic machining tool that can operate in a virtual space, which is equivalent to the authentic conditions in the field. The investigation of the simulation function elements indicates the necessity to generate the 6-axis machining, which attaches an angle head to the main axis of the machine. Using an NC program for the wing ribs, we attempt to verify the correspondence and conformity between the machine simulation model and the actual equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5347-5356
• /
• 2011

In this paper, we compared various shear deformation functions for modelling anti-symmetric composite sandwich plates discretized by a mixed finite element method based on the Lagrangian/Hermite interpolation functions. These shear deformation theories uses polynomial, trigonometric, hyperbolic and exponential functions through the thickness direction, allowing for zero transverse shear stresses at the top and bottom surfaces of the plate. All shear deformation functions are compared with other available analytical/3D elasticity solutions, As a result, reasonable accuracy for investigated problems are predicted. Particularly, The present results show that the use of exponential shear deformation theory provides very good solutions for composite sandwich plates.