• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.136-139
• /
• 2006

In this paper we propose a small form factor actuator using an inclined motion guide for auto-focusing and zoom motions for mobile information devices. The novel structure using the inclined motion guide and a lens-supporting beam converts the circular motion by an ultrasonic motor into the linear motion of the optical lens. The proposed actuator has a simple structure to minimizing the mechanical tolerance, and the stroke is easy to modify by controlling the inclined angle. Experiments using a prototype verify the validity of the model as small form factor optical actuator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1109-1112
• /
• 2004

This paper presents a high sensitive force sensing module to measure machining forces for a tip-based nanopatterning instrument. The force sensing module utilizing a leaf spring mechanism and a capacitive displacement sensor has been designed to provide a measuring range from 80$\mu$N to 8N. This force sensing module is mounted on a PZT driven in-feed motion stage with 1 nm resolution. The sample can be moved by a X-Y scanning motion stage with 5 nm resolution. In the patterning experiments, the machining forces were controlled and monitored by the force sensing module. Then, the patterned sample was measured by AFM. Experimental results demonstrated that the developed force sensing module can be used as an effective sensing device in the nanopatterning operation.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.227-230
• /
• 2003

There are many practical applization that require motorless actuation. The purpose of the paper is to develop an actuator using the shape memory alloys(SMA) that operates is linear motion. We consider several design specifications as driving force of above 5kgf, driving stroke length 15mm, supply voltage DC 9-l2V and operating time less than 0.5sec etc. Design procedure and experimental results of a mock-up model are Presented. It has been also applied to the door locking system.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1219-1224
• /
• 2007

This is Presents experimental results of a force tracking controller for a quarter-car suspension system. The active suspension system was decomposed into two loops. At the main loop, the desired force signal is calculate by using a standard LQ design process. The Time Delay Control(TDC) design technique is then used to design the force controller such that the desired force signal is achieved in a robust manner when actuator or other plant uncertainties are present. The ADAMS controls module was used to realize the joint simulation of ADAMS and MATLAB, of which the results showed that the TDC strategy is reasonable and feasible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1089-1092
• /
• 1995

A planar vibratory gyroscope using electrostatic actuation and electromagnetic detection is proposed. The gyroscope has large sensitivity and can be fabricated by using surface micrimachining, bulk micromachining and conventional machining technology. In this paper, the gyroscope and the electromagnetic detecting system equations are derived to determine the output characteristics for the planar vibratory gyroscope using electrostatic acturation and electromagnetic detection. The maximum output is obtained when the driving frequencyequals to the detecting frequency. The resonant frequencies of the resonator are determined by the beam stiffness, i.e. the material constants and spring dimensions. The dimensions of the beams are determined using the analytic vibration modelling. The expected resonant frequencies are 200Hz both and the sensitivity is 62mV/deg/sec with 4000 electronic circuit amplifying coefficient for an AC drive voltage of 3V bias voltage of 15V and DC field current of 50 mA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.565-569
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator for tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the presented method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• Journal of Applied Reliability
• /
• v.12 no.2
• /
• pp.121-129
• /
• 2012

This paper deals with a design of reliable state feedback controllers for continuous time polynomial systems with actuator failures. The goal is to find an asymptotically stabilizing controller such that the closed loop system achieves the prescribed decay rate in the actuator failure cases. Based on a sum of squares (SOS) approach, a design method for reliable nonlinear controller is presented. In order to demonstrate our design method, a numerical example is shown.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.215-224
• /
• 2012

This paper deals with a design of fault tolerant state feedback controllers for continuous time nonlinear time delay systems with actuator failures. The goal is to find an asymptotically stabilizing controller such that the closed loop system achieves the prescribed $H_{\infty}$ performance objective in the actuator fault cases. Based on a sum of squares (SOS) approach, a design method for $H_{\infty}$ fault tolerant controller is presented. In order to demonstrate our design method, a numerical example is provided.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.27-28
• /
• 2006

최근 변전소 자동화 시스템에서 가장 큰 관심사는 종래의 인간의 개입을 최소화 할 수 있는 통합화, 자동화, 원격 감시화이다. 즉 변전소를 구성하는 장비들은 서로 다른 구조와 통신방식에서 벗어나 IEC61850 표준규격에서 제안하는 객체 모델링 및 통신프로토콜을 이용한 마이크로프로세서 기반의 IED를 개발하여 상호운용성을 확보하는 것이다. 본 연구에서는 IEC61850기반의 간단한 과전류 계전 IED(OCR)를 개발하고 그 구현방법을 설명하였다. 구현을 위해 상용보드인 MVME5100에 실시간 운영체제인 VxWorks를 포팅하여 MMS(Manufacturing Message Specification), SMV(Sampled multicast value) GOOSE(Generic object oriented substation event) 통신모듈을 탑재하였고 과전류 계전 요소들을 논리장치 및 논리노드로 구현하였다. 또한 전력계통 시뮬레이터인 Hypersim을 이용하여 IEC61850기반의 리클로저, 액츄에이터, 병합장치를 구현하고 과전류 계전 IED의 성능을 검증하였다.